Topgunz - air to air upgrade

omG37S · 02-29-2016, 03:48 AM

Quote:

Originally Posted by TopgunZ

This should fit right up. It obviously hasn't been done yet but even if there is a small diference it can easily be worked around.

Thanks. I'm looking at purchasing a local Stillen kit with upgraded impeller and 10lb pulley. I'm also torn, because I may try a single big turbo. If I go SC, I won't settle for less than 500whp; if I go turbo, then I'll likely go 600whp. Obviously this kit will be necessary to get to 500whp, hence my concern.

mikey1600 · 03-01-2016, 08:56 AM

Quote:

Originally Posted by omG37S

Thanks. I'm looking at purchasing a local Stillen kit with upgraded impeller and 10lb pulley. I'm also torn, because I may try a single big turbo. If I go SC, I won't settle for less than 500whp; if I go turbo, then I'll likely go 600whp. Obviously this kit will be necessary to get to 500whp, hence my concern.

just go turbo straight up mate, no point getting the stillen kit and spending all the extra on it, I'd be all over a BP turbo kit if they fit RHD and the stillen kit would be in the bin rofl

Pauly Z · 03-01-2016, 09:08 AM

Not unless you get a stillen kit for $800 like me.

Sent from my SM-N920V using Tapatalk

TopgunZ · 03-01-2016, 09:19 AM

Quote:

Originally Posted by mikey1600

just go turbo straight up mate, no point getting the stillen kit and spending all the extra on it, I'd be all over a BP turbo kit if they fit RHD and the stillen kit would be in the bin rofl

It if you had an Automatic, which is what he has.

mikey1600 · 03-01-2016, 06:58 PM

Quote:

Originally Posted by TopgunZ

It if you had an Automatic, which is what he has.

not saying he has to go BP, just saying I would on my car if it was available

by the time he gets the stillen kit and upgrades, going to be at twin turbo $$ if he's thinking of going either makes sense to just turbo straight up

omG37S · 03-02-2016, 03:29 PM

Quote:

Originally Posted by mikey1600

not saying he has to go BP, just saying I would on my car if it was available

by the time he gets the stillen kit and upgrades, going to be at twin turbo $$ if he's thinking of going either makes sense to just turbo straight up

Well, I can lock up the V3 Stillen kit with upgraded impeller, trans cooler, and csf radiator for under $5k. Add the A2A kit, and I can be in the hp range I'm shooting for.

I had a great deal on a brand new Precision ball bearing 6766, which is why I was thinking that route. Still waiting to hear if a local builder can fab up something to work with my auto.

mikey1600 · 03-03-2016, 05:04 AM

Quote:

Originally Posted by omG37S

Well, I can lock up the V3 Stillen kit with upgraded impeller, trans cooler, and csf radiator for under $5k. Add the A2A kit, and I can be in the hp range I'm shooting for.

I had a great deal on a brand new Precision ball bearing 6766, which is why I was thinking that route. Still waiting to hear if a local builder can fab up something to work with my auto.

Yeah no probs, if you can get it for $5k thats sweet, but don't go using the upgraded impeller until you go A2A lol, bangggggggggggg

Pauly Z · 03-03-2016, 07:06 AM

Yeah I'm just going with stock impeller and pulley first.

Sent from my SM-N920V using Tapatalk

omG37S · 03-03-2016, 02:31 PM

Quote:

Originally Posted by mikey1600

Yeah no probs, if you can get it for $5k thats sweet, but don't go using the upgraded impeller until you go A2A lol, bangggggggggggg

I didn't plan to have anything installed until I had all the pieces, including A2A.

omG37S · 03-03-2016, 06:25 PM

Quote:

Originally Posted by VSS370z

Thats a good price for the Stillen kit. Just keep in mind that the kit has been on the market for years now and even to this day owners have had a really hard time touching that 500whp mark which i think only 1 person has but could be wrong. Don't want to be a downer just a heads up to keep an open mind.

I implore you and others to keep my goals grounded. I'm a realist. How many people have had the A2A kit, as well as Aquamist, to attempt the 500 number? It may have been tried unsuccessfully, but I haven't seen it yet. Now, I doubt my butt dyno will know the difference between 500 and 480whp, but everyone knows we only race with dyno sheets.

JWillis72 · 03-03-2016, 06:35 PM

I had aquamist on my car and it sucked! It always had some thing not working, I don't think it will be needed with a2a but if you are going to run meth I would get a simpler system.

Sent from my iPhone using Tapatalk

omG37S · 03-03-2016, 06:37 PM

Quote:

Originally Posted by JWillis72

I had aquamist on my car and it sucked! It always had some thing not working, I don't think it will be needed with a2a but if you are going to run meth I would get a simpler system.

Sent from my iPhone using Tapatalk

Sounds good. That was just one recommended to me, but probably didn't have the experience with it that you did.

JWillis72 · 03-03-2016, 06:57 PM

My buddy installed a snow system at the same time, his just works mine always had problems. It's great because it's so complex but it's also it problem. After sending mine overseas to be fixed twice I decided it wasn't going back in the car. I only said it so you don't have the headaches I did.

Sent from my iPhone using Tapatalk

StillenZ84 · 03-03-2016, 07:03 PM

I had the Devils Own meth injection system installed before I went e85 and had 0 problems with it. Have heard good things about the Snow kit as well. There are definitely a few different options if you want to go the meth route.

Chuck33079 · 03-03-2016, 07:24 PM

+1 on getting the simplest meth system possible. All you need is one that increases flow as boost increases.

When I ran meth on my last car, my tuner made it a point to have me always run a 50:50 mix of meth to water. The power difference was negligible, and mixed with water it would no longer ignite if there was a leak somewhere.

03-01-2016, 09:08 AM	#78 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Not unless you get a stillen kit for $800 like me. Sent from my SM-N920V using Tapatalk 370Zsteve likes this. __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

03-03-2016, 07:06 AM	#83 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Yeah I'm just going with stock impeller and pulley first. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

03-03-2016, 07:03 PM	#89 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	I had the Devils Own meth injection system installed before I went e85 and had 0 problems with it. Have heard good things about the Snow kit as well. There are definitely a few different options if you want to go the meth route. JWillis72 likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

03-03-2016, 07:24 PM	#90 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	+1 on getting the simplest meth system possible. All you need is one that increases flow as boost increases. When I ran meth on my last car, my tuner made it a point to have me always run a 50:50 mix of meth to water. The power difference was negligible, and mixed with water it would no longer ignite if there was a leak somewhere. TopgunZ likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM

03-03-2016, 06:35 PM	#86 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I had aquamist on my car and it sucked! It always had some thing not working, I don't think it will be needed with a2a but if you are going to run meth I would get a simpler system. Sent from my iPhone using Tapatalk

03-03-2016, 06:57 PM	#88 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	My buddy installed a snow system at the same time, his just works mine always had problems. It's great because it's so complex but it's also it problem. After sending mine overseas to be fixed twice I decided it wasn't going back in the car. I only said it so you don't have the headaches I did. Sent from my iPhone using Tapatalk