Topgunz - air to air upgrade

TBatt

A2A may be the better way but it is not the only way.

Most all of the car makers that offer SC use a water cooled system. They offer the system as a highly developed off the shelf system. If you mod their system the warranty goes away.

I agree with you that a better solution for an open source tuning would be a2a but the stock system seems to be fine. The tune is another story.

I am planning on installing the Stillen kit in June, stock with the canned tune. As soon as it has been tested for leaks and any problems it will go to a tuner and get a proper tune. I have no plans on pushing the kit to higher boost. If I ever do, I will look into a complete solution, not just installing a 9 psi pulley. You have to do your homework if you are going to deviate from the designed system.

Thanks to all for your inputs. This is a great forum!!!!

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!