Topgunz - air to air upgrade

TBatt · 06-13-2016, 09:13 PM

I like stealth. Don't let them know that you are carrying a "big stick".

In a couple of weeks I'm planning on surprising the Ahole in the M3 that keeps aggravating me. He can slightly pull away from me now. Is he in for a big surprise!

BTW: TopgunZ has been stellar working with me through the trials of installing a Stillen kit and his A2A at the same time. Great guy!

TopgunZ · 06-13-2016, 10:31 PM

That M3 will look like it's standing still compared to stock.

jwick · 06-13-2016, 11:08 PM

Quote:

Originally Posted by TBatt

I like stealth. Don't let them know that you are carrying a "big stick".

In a couple of weeks I'm planning on surprising the Ahole in the M3 that keeps aggravating me. He can slightly pull away from me now. Is he in for a big surprise!

BTW: TopgunZ has been stellar working with me through the trials of installing a Stillen kit and his A2A at the same time. Great guy!

Sleeper is nice

jwick · 06-13-2016, 11:09 PM

Quote:

Originally Posted by TopgunZ

That M3 will look like it's standing still compared to stock.

True story

BOLIO 671 · 06-14-2016, 07:14 AM

Curious whether any of u guys have done a before and after dyno on this yet? Would be great to compare the numbers. JWILLIS....do u recall what ur gains were?

TopgunZ · 06-14-2016, 08:24 AM

Quote:

Originally Posted by Pauly Z

Well I just picked up a 54mm idler pulley. Now I just need to figure out a belt. Pulley looks like it will be perfect. Seb wants to wait till I get the Tial hooked up before continuing with tuning. Right now he has the a/f around the 11's but it gets down to 10.5 around 6500 rpms.

Sent from my SM-N920V using Tapatalk

Just take a piece of string or tape and mark it from the top of one pulley to the top of the other that are normally on there. Then do that from the same tops except run it down and under the added pulley. Subtract the first measurement from the second and add that number to the overall length of our serp pulley. Doing this in my head I think it would add about 6"'s or so but that is pretty ballparked.

EVOHUNTER · 06-14-2016, 09:35 AM

I just finished these up this morning, had them off the car so why not paint them right?

there going back on tonight, Ill get all the pulleys on and work on this belt thing tonight.

EVOHUNTER · 06-14-2016, 09:36 AM

Also guys, if your oil pressure gauge is reading below 14-17 psi at idle, your oil pan will be full of gasket material! and the oil gallerys will be blown out.

Check your oil pressure guys, mine was at about 5PSi, it wouldn't trigger the Low oil pressure light either.

Pauly Z · 06-14-2016, 09:36 AM

Quote:

Originally Posted by EVOHUNTER

I just finished these up this morning, had them off the car so why not paint them right?

there going back on tonight, Ill get all the pulleys on and work on this belt thing tonight.

Wow that looks good. That's paint?

Sent from my SM-N920V using Tapatalk

JWillis72 · 06-14-2016, 09:46 AM

Quote:

Originally Posted by BOLIO 671

Curious whether any of u guys have done a before and after dyno on this yet? Would be great to compare the numbers. JWILLIS....do u recall what ur gains were?

15hp/ 33 tq I believe it had more in it but the tuner clearly didn't know the 370Z well. Seb is tuning the car when it's back together so we will see what he can make with it.

Sent from my iPhone using Tapatalk

EVOHUNTER · 06-14-2016, 09:52 AM

Paint yes, Not a rattle can though.

dupoint ceramic high temp primer - 2 coats. 60 psi line pressure

I used Dupoint Black, code # LZ9Y - PHANTOM BACK PEARL. 3 coats. 33-45PSI depending on angle.

mixed 30% paint 70% harderer.

Finished with 3 coats of clear - 60 psi

its not perfect, pretty dam close.

the next step would be wet sand and polish, but good luck getting a polisher in those groves of the timing cover.

TopgunZ · 06-14-2016, 10:07 AM

Quote:

Originally Posted by BOLIO 671

Curious whether any of u guys have done a before and after dyno on this yet? Would be great to compare the numbers. JWILLIS....do u recall what ur gains were?

Milkcow and Z84 have dynos lined up for this week so we will see soon.

EVOHUNTER · 06-14-2016, 10:12 AM

Sebz is down Thursday next week, so ill have my final tune done, with dyno sweets from
water to air - air to air and air to air with this new impeller.

milkcow500 · 06-14-2016, 10:25 AM

I'm logging 4th gear WOT runs today for Seb. I'm going to see what he says in regards to the progress we are making, but for now, it's looking pretty good.

Unless something ***** on me, I should be on the dyno on sunday. The dyno runs low, but I can compare to my previous numbers at least, since it was done on the same dyno.

swiss370Z · 06-14-2016, 01:16 PM

Quote:

Originally Posted by EVOHUNTER

Sebz is down Thursday next week, so ill have my final tune done, with dyno sweets from
water to air - air to air and air to air with this new impeller.

GREAT

BTW: I Like Your Paintjob

06-13-2016, 09:13 PM	#691 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	I like stealth. Don't let them know that you are carrying a "big stick". In a couple of weeks I'm planning on surprising the Ahole in the M3 that keeps aggravating me. He can slightly pull away from me now. Is he in for a big surprise! BTW: TopgunZ has been stellar working with me through the trials of installing a Stillen kit and his A2A at the same time. Great guy! 370Zsteve, jwick, Jazz8560 and 3 others like this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

06-13-2016, 10:31 PM	#692 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	That M3 will look like it's standing still compared to stock. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

06-14-2016, 07:14 AM	#695 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Curious whether any of u guys have done a before and after dyno on this yet? Would be great to compare the numbers. JWILLIS....do u recall what ur gains were? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

06-14-2016, 09:35 AM	#697 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	I just finished these up this morning, had them off the car so why not paint them right? there going back on tonight, Ill get all the pulleys on and work on this belt thing tonight. bullitt5897, swiss370Z and ChaseZ like this. __________________

06-14-2016, 09:36 AM	#698 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Also guys, if your oil pressure gauge is reading below 14-17 psi at idle, your oil pan will be full of gasket material! and the oil gallerys will be blown out. Check your oil pressure guys, mine was at about 5PSi, it wouldn't trigger the Low oil pressure light either. __________________

06-14-2016, 09:52 AM	#701 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Paint yes, Not a rattle can though. dupoint ceramic high temp primer - 2 coats. 60 psi line pressure I used Dupoint Black, code # LZ9Y - PHANTOM BACK PEARL. 3 coats. 33-45PSI depending on angle. mixed 30% paint 70% harderer. Finished with 3 coats of clear - 60 psi its not perfect, pretty dam close. the next step would be wet sand and polish, but good luck getting a polisher in those groves of the timing cover. TBatt and ChaseZ like this. __________________ Last edited by EVOHUNTER; 06-14-2016 at 09:54 AM.

06-14-2016, 10:12 AM	#703 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Sebz is down Thursday next week, so ill have my final tune done, with dyno sweets from water to air - air to air and air to air with this new impeller. 370Zsteve, BOLIO 671 and ANMVQ like this. __________________

06-14-2016, 10:25 AM	#704 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 43	I'm logging 4th gear WOT runs today for Seb. I'm going to see what he says in regards to the progress we are making, but for now, it's looking pretty good. Unless something ***** on me, I should be on the dyno on sunday. The dyno runs low, but I can compare to my previous numbers at least, since it was done on the same dyno.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM