Topgunz - air to air upgrade

Pauly Z · 06-10-2016, 05:18 PM

Well I just picked up a 54mm idler pulley. Now I just need to figure out a belt. Pulley looks like it will be perfect. Seb wants to wait till I get the Tial hooked up before continuing with tuning. Right now he has the a/f around the 11's but it gets down to 10.5 around 6500 rpms.

Sent from my SM-N920V using Tapatalk

EVOHUNTER · 06-11-2016, 09:18 AM

Hey guys I ordered the TIAL, got it yesterday.

Bought the pipe Topz recommended.

The clamp and the flange are way to small for the pipe.

do you have part #'s, so I can get the right clamp and TIAL flange.

also, anyone looking for a V3 to frankenstien I found this :

http://www.ebay.com/itm/301978243253 good deal, needs seals.

Pauly Z · 06-11-2016, 09:51 AM

I got the small clamp too that is the one for that model. You have to get the 50mm clamp .

Sent from my SM-N920V using Tapatalk

TopgunZ · 06-11-2016, 11:32 AM

Yeah the pipe has a 50mm flange, so you need the tial 50mm flange and a 50mm clamp.

Pauly Z · 06-12-2016, 05:15 PM

Got the Tial installed today! You all weren't joking, this thing does sound like a jet.

Sent from my SM-N920V using Tapatalk

Jinxx · 06-12-2016, 07:43 PM

Does anyone know if the tial in the pic would fit in place of the turbosmart bov that is used in the gtm kits ... And if it would be any better .. My turbosmart has a tendency to stick often and was looking for a replacement that wouldn't stick

TBatt · 06-12-2016, 10:51 PM

Install is going well, just slow. Hey, I'm old, what's your excuse?

Well is was going good until I ran into a bad Y-pipe. Top and I are working through it.

EVOHUNTER · 06-13-2016, 09:20 AM

Quote:

Originally Posted by Pauly Z

Got the Tial installed today! You all weren't joking, this thing does sound like a jet.

Sent from my SM-N920V using Tapatalk

Before you cause some major damage!

Your BPV is installed the wrong way, you inlet plunger in on your outlet side. atleast I think it is?

Fix that ASAP!

Pauly Z · 06-13-2016, 09:24 AM

Quote:

Originally Posted by EVOHUNTER

Before you cause some major damage!

Your BPV is installed the wrong way, you inlet plunger in on your outlet side. atleast I think it is?

Fix that ASAP!

According to Tial that's the way it's supposed to be.

Sent from my SM-N920V using Tapatalk

TopgunZ · 06-13-2016, 09:28 AM

Nope. Thats all good. It is a reverse design.

EVOHUNTER · 06-13-2016, 09:30 AM

hahah wow good thing I didn't install it the other way. sorry guys lol

TBatt · 06-13-2016, 03:03 PM

I'm looking to quiet down the BOV with a muffler. Found these at McMaster-Carr. I'll let you know how well it works. At least it is a cheap experiment.

McMaster-Carr

I have the 1 inch version style A. I'm planning on turning down the threads on my lathe except for the very end so a clamp can hold it on.

EVOHUNTER · 06-13-2016, 04:36 PM

That's a good idea. let me know what u figure out

TopgunZ · 06-13-2016, 05:05 PM

Come on.. You guys don't want to frighten women, children and squirrels as you drive by?

It is hard to get into a street race against most cars that know not to Fudge with a boosted 370 though.

StillenZ84 · 06-13-2016, 05:22 PM

After I blew the top off of my filter that I had on the Tial, I have just left it off. So loud but I have pretty much got use to it now. lol

06-10-2016, 05:18 PM	#676 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Well I just picked up a 54mm idler pulley. Now I just need to figure out a belt. Pulley looks like it will be perfect. Seb wants to wait till I get the Tial hooked up before continuing with tuning. Right now he has the a/f around the 11's but it gets down to 10.5 around 6500 rpms. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

06-11-2016, 09:18 AM	#677 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Hey guys I ordered the TIAL, got it yesterday. Bought the pipe Topz recommended. The clamp and the flange are way to small for the pipe. do you have part #'s, so I can get the right clamp and TIAL flange. also, anyone looking for a V3 to frankenstien I found this : http://www.ebay.com/itm/301978243253 good deal, needs seals. __________________

06-11-2016, 09:51 AM	#678 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	I got the small clamp too that is the one for that model. You have to get the 50mm clamp . Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

06-11-2016, 11:32 AM	#679 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Yeah the pipe has a 50mm flange, so you need the tial 50mm flange and a 50mm clamp. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

06-12-2016, 05:15 PM	#680 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Got the Tial installed today! You all weren't joking, this thing does sound like a jet. Sent from my SM-N920V using Tapatalk StillenZ84 likes this. __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

06-12-2016, 07:43 PM	#681 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Does anyone know if the tial in the pic would fit in place of the turbosmart bov that is used in the gtm kits ... And if it would be any better .. My turbosmart has a tendency to stick often and was looking for a replacement that wouldn't stick

06-13-2016, 09:28 AM	#685 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Nope. Thats all good. It is a reverse design. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

06-13-2016, 09:30 AM	#686 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	hahah wow good thing I didn't install it the other way. sorry guys lol __________________

06-13-2016, 03:03 PM	#687 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	I'm looking to quiet down the BOV with a muffler. Found these at McMaster-Carr. I'll let you know how well it works. At least it is a cheap experiment. McMaster-Carr I have the 1 inch version style A. I'm planning on turning down the threads on my lathe except for the very end so a clamp can hold it on. EVOHUNTER likes this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

06-13-2016, 04:36 PM	#688 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	That's a good idea. let me know what u figure out __________________

06-13-2016, 05:05 PM	#689 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Come on.. You guys don't want to frighten women, children and squirrels as you drive by? It is hard to get into a street race against most cars that know not to Fudge with a boosted 370 though. TBatt and StillenZ84 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

06-13-2016, 05:22 PM	#690 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	After I blew the top off of my filter that I had on the Tial, I have just left it off. So loud but I have pretty much got use to it now. lol EVOHUNTER likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM