Topgunz - air to air upgrade

redondoaveb · 10-05-2018, 03:24 PM

Quote:

Originally Posted by wideglideleon

I have one. I got from TopgunZ.

Thanks, I'll talk to Aaron

wideglideleon · 10-05-2018, 04:42 PM

I have his old one, actually his whole system he had on his Z. I'm not using the brace make me an offer!

redondoaveb · 10-05-2018, 06:16 PM

Quote:

Originally Posted by wideglideleon

I have his old one, actually his whole system he had on his Z. I'm not using the brace make me an offer!

I sent you aPM

redondoaveb · 10-05-2018, 08:58 PM

What the heck is wrong here? 928 impeller, 9lb pulley, 2.85 sc pulley, 3.47 jackshaft pulley. 91 octane. Does it look like belt slippage or ?

cupcakez · 10-05-2018, 09:00 PM

Wow. Scary. I hope mine isnt that low when i dyno it

You have any supporting mods or kits to eliminate the slippage or its just as u say it is?

redondoaveb · 10-05-2018, 09:08 PM

Quote:

Originally Posted by cupcakez

Wow. Scary. I hope mine isnt that low when i dyno it

You have any supporting mods or kits to eliminate the slippage or its just as u say it is?

High traction pulleys. The problem is the way the power drops off so early.

TopgunZ · 10-05-2018, 10:28 PM

So you were making almost 600whp but then that changed? Wierd. When did it change? Was it sudden or slowly get worse?

redondoaveb · 10-05-2018, 10:54 PM

Quote:

Originally Posted by TopgunZ

So you were making almost 600whp but then that changed? Wierd. When did it change? Was it sudden or slowly get worse?

This is a new 91 tune. I was making 586 on e85 and 471 on 91 @13psi with just the 9 lb pulley, the 2.85 pulley and the Si wheel.

This set up is the 928 wheel, 2.85 sc pulley and 3.47 jackshaft pulley @ 14.4 psi. And I only gained 1.5 or so psi by adding the 928 wheel and the 3.47 jackshaft pulley.

More boost, loss of power. The way the power and torque drop off just doesn't look right.

redondoaveb · 10-06-2018, 02:10 PM

I think I might have an idea what my issue is. The V3 is rated at 52,000 rpm. With my current pulley set up, my sc is spinning at 66,000 rpm. I'm running the turbo guard screen and have an unresticted intake so I know it's not a restricted intake issue. It appears that it might be that the volumetric efficiency is dropping off (air cfm in vs air cfm out).

I'm going to call vortech on Monday and see if they can confirm my suspicions.

I want to give a big thanks to another forum member "Z"en for explaining the basics of volumetric efficiency to me.

URBiN~HURMiT · 10-06-2018, 11:36 PM

Quote:

Originally Posted by wideglideleon

I have his old one, actually his whole system he had on his Z. I'm not using the brace make me an offer!

So you ended up with my Stillen SC'r and the JR Trans sc'r brace ... I was the original owner ... Glad to see it's still going strong !!!

01206 · 10-12-2018, 04:15 PM

after install a2a and 9 lb pulley. the car start then turn off right away. i check everything is fine. fuel pressure 50-60.
do you guys know what it could be?

wideglideleon · 10-12-2018, 04:43 PM

Check your wiring , mine did that and I had MAF and Throttle cables switched, easy to do at the end of a long day.

redondoaveb · 10-12-2018, 05:40 PM

Super Vortech upgrade, 3.47 jackshaft pulley sc side, 3.00 sc pulley, Tial wastegate and Greddy Profec results on e85.
Only issue I'm having is that Seb had to do about 50 dyno pulls due some other issues and he said that my sc oil is black. Any ideas? Normal break in after rebuild? Supercharger going out, crappy rebuild? I'm going to change the oil and monitor it to see if it continues or if the sc starts making noise.

G3RSTY7 · 10-12-2018, 06:48 PM

Quote:

Originally Posted by redondoaveb

Super Vortech upgrade, 3.47 jackshaft pulley sc side, 3.00 sc pulley, Tial wastegate and Greddy Profec results on e85.
Only issue I'm having is that Seb had to do about 50 dyno pulls due some other issues and he said that my sc oil is black. Any ideas? Normal break in after rebuild? Supercharger going out, crappy rebuild? I'm going to change the oil and monitor it to see if it continues or if the sc starts making noise.

Hey you did it, congrats! So switching from 2.85 sc to 3.0 fixed it?
Speaking of noises, anyone have a heavy load sound coming from front of car/blower when reversing? Especially cold. Didnt have that sound before blower rebuilt/no slip kit installed

"Z"en · 10-12-2018, 07:32 PM

Quote:

Originally Posted by redondoaveb

Super Vortech upgrade, 3.47 jackshaft pulley sc side, 3.00 sc pulley, Tial wastegate and Greddy Profec results on e85.
Only issue I'm having is that Seb had to do about 50 dyno pulls due some other issues and he said that my sc oil is black. Any ideas? Normal break in after rebuild? Supercharger going out, crappy rebuild? I'm going to change the oil and monitor it to see if it continues or if the sc starts making noise.

Beautiful!!

10-05-2018, 04:42 PM	#2507 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I have his old one, actually his whole system he had on his Z. I'm not using the brace make me an offer! redondoaveb likes this.

10-05-2018, 09:00 PM	#2510 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	Wow. Scary. I hope mine isnt that low when i dyno it You have any supporting mods or kits to eliminate the slippage or its just as u say it is? __________________ \|\| ECUTEK (Eugene) \|\| A2A \|\| IPP Built Motor Stage IV Spec \|\| RJM Short Block \|\| Quaife LSD \|\| KW V3 \|\| Stillen-Exhaust \|\| 11.0.1 CR \|\| 928 Full Rebuild \|\| CPZ 34 Row Oil Cooler \|\|

10-05-2018, 10:28 PM	#2512 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	So you were making almost 600whp but then that changed? Wierd. When did it change? Was it sudden or slowly get worse? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-06-2018, 02:10 PM	#2514 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,360 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I think I might have an idea what my issue is. The V3 is rated at 52,000 rpm. With my current pulley set up, my sc is spinning at 66,000 rpm. I'm running the turbo guard screen and have an unresticted intake so I know it's not a restricted intake issue. It appears that it might be that the volumetric efficiency is dropping off (air cfm in vs air cfm out). I'm going to call vortech on Monday and see if they can confirm my suspicions. I want to give a big thanks to another forum member "Z"en for explaining the basics of volumetric efficiency to me. wideglideleon, ZontheRocks and "Z"en like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM

10-12-2018, 04:15 PM	#2516 (permalink)
01206 Base Member Join Date: Jul 2013 Location: Canada Posts: 25 Drives: 13 370z Rep Power: 12	after install a2a and 9 lb pulley. the car start then turn off right away. i check everything is fine. fuel pressure 50-60. do you guys know what it could be?

10-12-2018, 04:43 PM	#2517 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	Check your wiring , mine did that and I had MAF and Throttle cables switched, easy to do at the end of a long day.