8-Rib High-Traction Supercharger Pulleys

swiss370Z · 01-14-2016, 11:50 AM

Hey Guys

Has anyone experience with the following Pulleys of Vortech?
Adjust for the "STILLEN- Kit"?

8-Rib High-Traction Supercharger Pulleys | Vortech Superchargers

(See also the attached Image from me

)

Thanks a lot for Your reply

Ivo

swiss370Z · 01-14-2016, 11:52 AM

BTW: YES, i'm in contact with Vortech
But they can give me no experience of my request!

(Nevertheless, super nice people and very quick response to my request!)

TBatt · 01-14-2016, 12:35 PM

Very interesting! Looks like a good alternative to the cog belt.

Thanks for pointing this out!

EVOHUNTER · 01-14-2016, 12:38 PM

what do you want to know? ive done a full custom setup.

If you don't want to have a custom tension backet made. put a 3.50" on the jack shaft side.

I when 3.12" on jack side and 2.70 on supercharger side.

TBatt · 01-14-2016, 12:42 PM

EVOHunter, did you use these 8 rib pulleys for your setup?

EVOHUNTER · 01-14-2016, 01:20 PM

Quote:

Originally Posted by TBatt

EVOHunter, did you use these 8 rib pulleys for your setup?

Yes 8 Rib 2.70" bought it off the vortech site.

But remember, if you put on a 2.70" on the blower, you need a custom tension bracket to allow more tension, and 3" idler pulley on the tensioner assembly. ive been through this all on a thread ill post it for you!

But like I said, the easiest way is put a bigger pulley on the jack shaft side, then you can still use your stock bracket, pulley and belt

I find it funny how Vortech says you can go from a 3.20 to a 3.15 and from a 3.20 to a 2.75" with the stock idler pulley and bracket.
it does not work! I know 100% .

EVOHUNTER · 01-14-2016, 01:22 PM

look at page 13 and 14, should give you an idea of what I had to do!

Stillen Air to Air setup

TopgunZ · 01-14-2016, 02:19 PM

They are just shot-blasted. So they provide a little better grip then the electro polished

TBatt · 01-14-2016, 03:24 PM

Cool! Thanks!

I've been following the Jwillis72 saga.......or should I say soap opera. I feel his pain.

swiss370Z · 01-15-2016, 12:55 AM

Thanks to EVO

swiss370Z · 01-15-2016, 11:28 AM

I'll order the following items from Vortech:

2A038-347 8-Rib Supercharger Pulley (3.47") jack side

and

2A038-300 8-Rib High-Traction Supercharger Pulley (3.00 ") supercharger side

I will Report......(in April.....

)

Thanks for the Info Guys

StillenZ84 · 01-25-2016, 04:49 PM

Quote:

Originally Posted by swiss370Z

I'll order the following items from Vortech:

2A038-347 8-Rib Supercharger Pulley (3.47") jack side

and

2A038-300 8-Rib High-Traction Supercharger Pulley (3.00 ") supercharger side

I will Report......(in April.....

)

Thanks for the Info Guys

I ordered the same pulleys and the original bolts to bolt them in are too short for the new pulleys. Anyone have experience with this and what did you have to do for them to fit right? Another thing I noticed was if you do replace one the other must be replaced also as it sticks out 1/4" further than the other which would make the belt not flush on both pulleys.

TopgunZ · 01-25-2016, 04:53 PM

Are you guys really going to throw 12psi at this kit with that w2a?

StillenZ84 · 01-25-2016, 05:42 PM

I was planning on switching out the supercharger pulley for the 3" for now which would gain 1/2 to 1 psi over the 9.5 psi I have now. I ordered the 3.47" to change out when I do go ata in the very near future.

The original plan was to put the 3.47" on combined with the stock stillen pulley which would put me between 10-11 psi. We had the stock stillen on and went to put the 3.47" on and ran into the problem stated earlier. Now the plan is to put the 9 lb pulley and 3" supercharger pulley on before my new tune tomorrow.

TopgunZ · 01-25-2016, 05:59 PM

When are you going to dyno that 3.0"?

01-14-2016, 11:52 AM	#2 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	BTW: YES, i'm in contact with Vortech But they can give me no experience of my request! (Nevertheless, super nice people and very quick response to my request!) __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 01-14-2016 at 11:55 AM.

01-14-2016, 12:35 PM	#3 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20169	Very interesting! Looks like a good alternative to the cog belt. Thanks for pointing this out! __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

01-14-2016, 12:38 PM	#4 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	what do you want to know? ive done a full custom setup. If you don't want to have a custom tension backet made. put a 3.50" on the jack shaft side. I when 3.12" on jack side and 2.70 on supercharger side. swiss370Z likes this. __________________

01-14-2016, 12:42 PM	#5 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20169	EVOHunter, did you use these 8 rib pulleys for your setup? __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

01-14-2016, 01:22 PM	#7 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	look at page 13 and 14, should give you an idea of what I had to do! Stillen Air to Air setup swiss370Z likes this. __________________

01-14-2016, 02:19 PM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	They are just shot-blasted. So they provide a little better grip then the electro polished __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-14-2016, 03:24 PM	#9 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20169	Cool! Thanks! I've been following the Jwillis72 saga.......or should I say soap opera. I feel his pain. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

01-15-2016, 11:28 AM	#11 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	I'll order the following items from Vortech: 2A038-347 8-Rib Supercharger Pulley (3.47") jack side and 2A038-300 8-Rib High-Traction Supercharger Pulley (3.00 ") supercharger side I will Report......(in April.....) Thanks for the Info Guys StillenZ84 likes this. __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

01-25-2016, 04:53 PM	#13 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Are you guys really going to throw 12psi at this kit with that w2a? wsarver likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-25-2016, 05:42 PM	#14 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	I was planning on switching out the supercharger pulley for the 3" for now which would gain 1/2 to 1 psi over the 9.5 psi I have now. I ordered the 3.47" to change out when I do go ata in the very near future. The original plan was to put the 3.47" on combined with the stock stillen pulley which would put me between 10-11 psi. We had the stock stillen on and went to put the 3.47" on and ran into the problem stated earlier. Now the plan is to put the 9 lb pulley and 3" supercharger pulley on before my new tune tomorrow. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34 Last edited by StillenZ84; 01-25-2016 at 06:01 PM.

01-25-2016, 05:59 PM	#15 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	When are you going to dyno that 3.0"? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] NST Pulleys	chuckie311	Parts for sale (Private Classifieds)	1	11-13-2014 09:48 PM
Stillen Performance Intakes, Exhaust, Oil Coolers, Pulleys, & SUPERCHARGER! Intense!	INTENSEPOWER	Exhaust/Intake	50	05-02-2012 01:28 AM
[FOR SALE] NST Pulleys	B.A.Q	Parts for sale (Private Classifieds)	17	10-04-2011 12:49 AM
What pulleys?	import111	Engine & Drivetrain	1	10-03-2010 05:14 PM
Considering NST Pulleys	Rooskey	Nissan 370Z General Discussions	4	07-23-2010 04:07 AM