BP turbo build/advice

solidus · 01-24-2019, 07:02 PM

Yup initially I used the Greddy solenoid but switched it out for a new one. Just two wires and done. The only other item was a 4bar map sensor.

jwick · 01-24-2019, 07:04 PM

Quote:

Originally Posted by solidus

Yup initially I used the Greddy solenoid but switched it out for a new one. Just two wires and done. The only other item was a 4bar map sensor.

That’s a plug in from the Juke sensor, right?

solidus · 01-24-2019, 07:16 PM

Quote:

Originally Posted by jwick

That’s a plug in from the Juke sensor, right?

Not sure I got mine from Seb.

hc_416 · 02-17-2019, 10:31 PM

As I save up money for the parts I need i'm just trying to tidy up some things. I have a relay in the battier with a green light; It has two blue lines, a black line and a red line. Can anyone tell me what these lines are for? I can see that one red line goes to the battery with a fuse and is junction to run the the relay and pump. The black is junction and runs to the ground on the battery. One of the blue goes no were and the second one is junctioned to a yellow wire. thanks in advance.

P.S. I also don't see any of this wiring in the the BP manual.

jwick · 02-17-2019, 11:46 PM

Quote:

Originally Posted by hc_416

As I save up money for the parts I need i'm just trying to tidy up some things. I have a relay in the battier with a green light; It has two blue lines, a black line and a red line. Can anyone tell me what these lines are for? I can see that one red line goes to the battery with a fuse and is junction to run the the relay and pump. The black is junction and runs to the ground on the battery. One of the blue goes no were and the second one is junctioned to a yellow wire. thanks in advance.

P.S. I also don't see any of this wiring in the the BP manual.

Are you referring to the fuel pump relay or the exa pump?

hc_416 · 02-17-2019, 11:56 PM

Quote:

Originally Posted by jwick

Are you referring to the fuel pump relay or the exa pump?

It could be the fuel pump relay. It has a green light on it and it is in my pictures above. I found a blue wire not even connected was trying to make sure it was wired correct.

jwick · 02-18-2019, 12:15 AM

Quote:

Originally Posted by hc_416

It could be the fuel pump relay. It has a green light on it and it is in my pictures above. I found a blue wire not even connected was trying to make sure it was wired correct.

I don’t see any pictures unless it’s pages back.

Boosted Performance · 02-18-2019, 12:19 AM

With the fuel pump relay, there are two wires that go to the fuel pump, one to ground, and another to the battery.

If you have a picture, please post it or send it to me and I will tell you what goes where.

hc_416 · 02-18-2019, 09:01 AM

https://imgur.com/a/a3kTjTN

Here ya go. The relay is by the bat neg terminal.

jwick · 02-18-2019, 09:12 AM

Quote:

Originally Posted by hc_416

https://imgur.com/a/a3kTjTN

Here ya go. The relay is by the bat neg terminal.

That’s not what my fuel pump relay looks like.

hc_416 · 02-18-2019, 10:14 AM

Quote:

Originally Posted by jwick

That’s not what my fuel pump relay looks like.

The relay is not in the picture, just the way they wired it. Ill take a picture of it better when I get home. I don't get why the relay and pump and merged together, and why they ran the ground wire all the way back to the bat. Shouldn't they have just grounded it by the pump to the frame and then tap a 12 v source that turns on withe the accessory?

James10694 · 03-12-2019, 03:35 PM

For those with built motors out there which turbo are you running? I have a built 10.5:1 engine that I'm about to swap in. Was curious what others were running. Maybe sasha can chime in. Shooting for 750whp so I don't run into head gasket issues.

Elmo370z · 03-12-2019, 04:31 PM

Quote:

Originally Posted by James10694

For those with built motors out there which turbo are you running? I have a built 10.5:1 engine that I'm about to swap in. Was curious what others were running. Maybe sasha can chime in. Shooting for 750whp so I don't run into head gasket issues.

Should be fine with head gaskets at that power level. Once you want to make over 800 wheel I would wait to see how cjms conversion works oit

James10694 · 03-27-2019, 01:07 AM

Anyone hear from sasha latel? Sent him a PM but haven't heard anything for a while

Boosted Performance · 03-27-2019, 08:59 AM

Quote:

Originally Posted by James10694

Anyone hear from sasha latel? Sent him a PM but haven't heard anything for a while

Sorry, missed the PM....replied.

02-18-2019, 12:19 AM	#518 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	With the fuel pump relay, there are two wires that go to the fuel pump, one to ground, and another to the battery. If you have a picture, please post it or send it to me and I will tell you what goes where. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

03-12-2019, 03:35 PM	#522 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 917 Drives: 2010 370z Nismo Rep Power: 13	For those with built motors out there which turbo are you running? I have a built 10.5:1 engine that I'm about to swap in. Was curious what others were running. Maybe sasha can chime in. Shooting for 750whp so I don't run into head gasket issues. Hotrodz likes this. __________________ Boosted Performance Single Turbo 618whp/489 tq

03-27-2019, 01:07 AM	#524 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 917 Drives: 2010 370z Nismo Rep Power: 13	Anyone hear from sasha latel? Sent him a PM but haven't heard anything for a while __________________ Boosted Performance Single Turbo 618whp/489 tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM

01-24-2019, 07:02 PM	#511 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	Yup initially I used the Greddy solenoid but switched it out for a new one. Just two wires and done. The only other item was a 4bar map sensor.

02-17-2019, 10:31 PM	#514 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	As I save up money for the parts I need i'm just trying to tidy up some things. I have a relay in the battier with a green light; It has two blue lines, a black line and a red line. Can anyone tell me what these lines are for? I can see that one red line goes to the battery with a fuse and is junction to run the the relay and pump. The black is junction and runs to the ground on the battery. One of the blue goes no were and the second one is junctioned to a yellow wire. thanks in advance. P.S. I also don't see any of this wiring in the the BP manual.

02-18-2019, 09:01 AM	#519 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	https://imgur.com/a/a3kTjTN Here ya go. The relay is by the bat neg terminal.