BP turbo build/advice

TcRocket · 03-17-2016, 11:01 AM

Upon picking up car today from dealership I shared with them the book hours of another dealership of 1.3 hours for cmc install. They looked into it and said I was correct and they made a mistake on the original quote...... Hmm. Anyways $600 for clutch install. Left dealership and accelerated from first light and car won't rev past 3,000 rpm and check engine and traction control light is on. Limp mode in guessing........ Pissed at this point, u turn and right back. Car is throwing crank shaft code. Called Joe at Z speed to verify correct fly and it is he said it sounds like they clocked flywheel wrong or damaged it. One pissed off mofo right now. They are still trying to figure it out

jwick · 03-17-2016, 11:45 AM

They could have just damaged the sensor

Elmo370z · 03-17-2016, 12:34 PM

Wow, stupid dealerships

TcRocket · 03-19-2016, 02:12 PM

Well they pulled transmission again and found a bent smashed tooth on reluctor ring. Claimed they did not do damage but they contacted joe at Z speed and ordered another one and are paying for it and install.
[IMG]

[/IMG]
While I was under car I did not know about damage but there appers to be a scratch on block just above and to left of crankshaft. From a tooth on reluctor ring maybe? I.e. bent smashed tooth. The metal on bent tooth was actually wiped

[IMG]

[/IMG]

They did show me what they had hiding out in their back shed that they said I could trade the Z in on though.... Hmmm....$68k, 2013

hc_416 · 03-19-2016, 03:04 PM

Hey guys little update, I got most of the kit! I am just waiting for the Tial parts. On the flip side of that the shop i was going to go to tried to charge me 150 hour.... needless to say I said no thanks. It is a big job so I know I will have to pay a fair amount, but 150 a hour!! I am waiting for a quote from my old shop that works on Honda's, and German cars. They are 105 hour which for the area is feel is fair. What do you guys thing?

YzGyz · 03-19-2016, 05:06 PM

That's fair for a shop that REALLY knows that they are doing. I think my local guy is $110/hr.

YzGyz

jwick · 03-19-2016, 07:33 PM

Quote:

Originally Posted by hc_416

Hey guys little update, I got most of the kit! I am just waiting for the Tial parts. On the flip side of that the shop i was going to go to tried to charge me 150 hour.... needless to say I said no thanks. It is a big job so I know I will have to pay a fair amount, but 150 a hour!! I am waiting for a quote from my old shop that works on Honda's, and German cars. They are 105 hour which for the area is feel is fair. What do you guys thing?

You are having a shop install the whole kit?

hc_416 · 03-19-2016, 08:44 PM

Quote:

Originally Posted by jwick

You are having a shop install the whole kit?

going to be a clutch gauges, kit, wrap, fuel system and kit.

TcRocket · 03-19-2016, 11:23 PM

I spent $250 on good flat top Jack stands and hockey pucks I have all the tools. Starting to wish I did clutch myself. No one will take the time to do it right and do it like you would personally. Just my .02

hc_416 · 03-26-2016, 11:18 AM

Update! I am starting my build next week. First thing I am doing is getting the new clutch put in by a friend. The week after the kit will be installed, but I still need to find a tuner. I do have a question, what oil do you guys recommend, and if I get the base tune can I drive it to my tuner with out going into boost?

EliteXpress · 03-26-2016, 01:13 PM

I run Rotella T6 !

YzGyz · 03-26-2016, 01:49 PM

Change your transmission oil now!! Do it before you slap the BP kit on. The Turbo manifold makes getting to the fill and drain hole a PIA.

YzGyz

PongSanity · 03-26-2016, 01:55 PM

Mobil 1 or rotella... N yes. When u change your clutch, get some new trans fluid in there.

Sent from my iPhone using Tapatalk

jwick · 03-28-2016, 09:29 AM

Quote:

Originally Posted by elitexpress

i run rotella t6 !

^^^this^^^

jwick · 03-28-2016, 09:30 AM

Quote:

Originally Posted by hc_416

Update! I am starting my build next week. First thing I am doing is getting the new clutch put in by a friend. The week after the kit will be installed, but I still need to find a tuner. I do have a question, what oil do you guys recommend, and if I get the base tune can I drive it to my tuner with out going into boost?

Yes. The base tune will allow you to drive it to your tuner. Just don't beat on it.

This is only after you have done all your checks. Make sure your AFRs are good.

03-17-2016, 11:01 AM	#256 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Upon picking up car today from dealership I shared with them the book hours of another dealership of 1.3 hours for cmc install. They looked into it and said I was correct and they made a mistake on the original quote...... Hmm. Anyways $600 for clutch install. Left dealership and accelerated from first light and car won't rev past 3,000 rpm and check engine and traction control light is on. Limp mode in guessing........ Pissed at this point, u turn and right back. Car is throwing crank shaft code. Called Joe at Z speed to verify correct fly and it is he said it sounds like they clocked flywheel wrong or damaged it. One pissed off mofo right now. They are still trying to figure it out TheWeez likes this. Last edited by TcRocket; 03-17-2016 at 12:39 PM.

03-17-2016, 11:45 AM	#257 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	They could have just damaged the sensor __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-19-2016, 02:12 PM	#259 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Well they pulled transmission again and found a bent smashed tooth on reluctor ring. Claimed they did not do damage but they contacted joe at Z speed and ordered another one and are paying for it and install. [IMG][/IMG] While I was under car I did not know about damage but there appers to be a scratch on block just above and to left of crankshaft. From a tooth on reluctor ring maybe? I.e. bent smashed tooth. The metal on bent tooth was actually wiped [IMG][/IMG] They did show me what they had hiding out in their back shed that they said I could trade the Z in on though.... Hmmm....$68k, 2013 Last edited by TcRocket; 03-19-2016 at 02:18 PM.

03-19-2016, 05:06 PM	#261 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	That's fair for a shop that REALLY knows that they are doing. I think my local guy is $110/hr. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

03-26-2016, 01:13 PM	#266 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	I run Rotella T6 ! jwick likes this.

03-17-2016, 12:34 PM	#258 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Wow, stupid dealerships

03-19-2016, 03:04 PM	#260 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Hey guys little update, I got most of the kit! I am just waiting for the Tial parts. On the flip side of that the shop i was going to go to tried to charge me 150 hour.... needless to say I said no thanks. It is a big job so I know I will have to pay a fair amount, but 150 a hour!! I am waiting for a quote from my old shop that works on Honda's, and German cars. They are 105 hour which for the area is feel is fair. What do you guys thing?

03-19-2016, 11:23 PM	#264 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	I spent $250 on good flat top Jack stands and hockey pucks I have all the tools. Starting to wish I did clutch myself. No one will take the time to do it right and do it like you would personally. Just my .02

03-26-2016, 11:18 AM	#265 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Update! I am starting my build next week. First thing I am doing is getting the new clutch put in by a friend. The week after the kit will be installed, but I still need to find a tuner. I do have a question, what oil do you guys recommend, and if I get the base tune can I drive it to my tuner with out going into boost?

03-26-2016, 01:49 PM	#267 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Change your transmission oil now!! Do it before you slap the BP kit on. The Turbo manifold makes getting to the fill and drain hole a PIA. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

03-26-2016, 01:55 PM	#268 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Mobil 1 or rotella... N yes. When u change your clutch, get some new trans fluid in there. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM