BP turbo build/advice

TcRocket · 03-03-2016, 09:10 AM

The parts pile is growing fast.....

jwick · 03-03-2016, 10:33 AM

Quote:

Originally Posted by TcRocket

The parts pile is growing fast.....

Nice. I see you went with safety wire instead of those SS ties. Good choice. If you've never safety tied before shoot me a PM with you number and I'll talk you thru it.

hc_416 · 03-11-2016, 03:21 PM

Hey guys new update. I got my S1-s upgraded fuel kit, my soutbend clutch, and my bb 6266 TURBO!!. Really looking forward to get the rest so I can have it put on!!

stefonelee · 03-11-2016, 03:26 PM

Are you going e85? Following your build and can't wait till its completed

TcRocket · 03-11-2016, 04:52 PM

[IMG]

[/IMG]

Damnit just got her out today. Apparently they don't approve of sliding around corners. Let go not even a warning

hc_416 · 03-11-2016, 08:20 PM

Quote:

Originally Posted by stefonelee

Are you going e85? Following your build and can't wait till its completed

Not at this time, I will reach my goals on 93. I want to finish up the car and see my 500-550 hp and tq in the 400-450 range. My tuner has a heart breaking dyno which will show low numbers. To top it off my brother has a fully built DE and made 500 hp and 499 tq, so the goal is to beat him! He does have a super charger with keelefred high lift cams and a fully built lower end. So it will be close and I cant wait to go to our local track. On top of that, I really am a audiophile so after this build next year I will put in audio. I will go with a five channel amp and have components front and back with a sub. SQ FTW!!

TcRocket · 03-13-2016, 07:31 PM

Still contemplating on how I'm going to get through the firewall. Didn't you have a good method jwick?

jwick · 03-13-2016, 10:36 PM

Quote:

Originally Posted by TcRocket

Still contemplating on how I'm going to get through the firewall. Didn't you have a good method jwick?

One of these

Used this to drill the firewall

TcRocket · 03-16-2016, 09:51 AM

OK officially pissed. I'm having Nissan install my clutch and flywheel. Quoted me last summer for $500. They call me this am and tell me it's another 4 hours to install the cmc. Um........from my reading on here it has to be rebuild or replaced anyways during a clutch install unless they were figuring on using the original slave for the quote instead of my HD slave. I'm pissed and confused. Cmc has the be replaced or rebuilt. Am I wrong or are they screwing me. $800 for clutch install now.......wtf

Chuck33079 · 03-16-2016, 10:57 AM

The CMC should be another hour, max. It's accessible from the top.

Jayhovah · 03-16-2016, 10:58 AM

Quote:

Originally Posted by TcRocket

OK officially pissed. I'm having Nissan install my clutch and flywheel. Quoted me last summer for $500. They call me this am and tell me it's another 4 hours to install the cmc. Um........from my reading on here it has to be rebuild or replaced anyways during a clutch install unless they were figuring on using the original slave for the quote instead of my HD slave. I'm pissed and confused. Cmc has the be replaced or rebuilt. Am I wrong or are they screwing me. $800 for clutch install now.......wtf

They are both screwing you and not screwing you.
The CMC replacement IS additional labor.
The CMC replacement SHOULD NOT take 4 hours and there is no way it says that in their service guidance. Should be an additional 1-1.5 hours.

TcRocket · 03-16-2016, 11:14 AM

Quote:

Originally Posted by Jayhovah

They are both screwing you and not screwing you.
The CMC replacement IS additional labor.
The CMC replacement SHOULD NOT take 4 hours and there is no way it says that in their service guidance. Should be an additional 1-1.5 hours.

Parts I provided were flywheel, clutch, pressure plate, HD csc, cmc, redline transmission fluid, clutch fluid and insulated clutch line. $1600 just in parts. Southbend stage 3 DD and lightweight steel flywheel. I want to see their book on cmc I agree........ Not happy

jwick · 03-16-2016, 11:21 AM

Quote:

Originally Posted by Chuck33079

The CMC should be another hour, max. It's accessible from the top.

Awesome Z quoted me an hour and it ended up taking them close to three. Apparently it's a bitch to get the thing back in there.

TcRocket · 03-16-2016, 11:26 AM

Called another Nissan dealership they said their book hours for cmc is 1.3 hours. There WILL be a war tomorrow when I go to get the car. Book hours is book hours at a dealership. I used to work construction we only got paid what the bid was for. Same concept at a dealership far as I see it. They did say they would take $100 off 4 hour extra from original quote,........

jwick · 03-16-2016, 11:30 AM

Quote:

Originally Posted by TcRocket

Called another Nissan dealership they said their book hours for cmc is 1.3 hours. There WILL be a war tomorrow when I go to get the car.

That sounds more like it. They'll probably give you some BS that the extra labor was also because the CSC was aftermarket and it took longer to bleed.

Got your PM. I responded with my cell. Hit me up when you are ready to wrap and I'll talk you thru the safety wiring.

03-03-2016, 09:10 AM	#241 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	The parts pile is growing fast..... Presto, enrique_370, YzGyz and 1 others like this.

03-11-2016, 03:21 PM	#243 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Hey guys new update. I got my S1-s upgraded fuel kit, my soutbend clutch, and my bb 6266 TURBO!!. Really looking forward to get the rest so I can have it put on!! jwick, EliteXpress and stefonelee like this.

03-11-2016, 04:52 PM	#245 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	[IMG][/IMG] Damnit just got her out today. Apparently they don't approve of sliding around corners. Let go not even a warning GaleForce, Ghostvette and Memphis370Z like this.

03-16-2016, 10:57 AM	#250 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	The CMC should be another hour, max. It's accessible from the top. GaleForce and stefonelee like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-16-2016, 11:26 AM	#254 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Called another Nissan dealership they said their book hours for cmc is 1.3 hours. There WILL be a war tomorrow when I go to get the car. Book hours is book hours at a dealership. I used to work construction we only got paid what the bid was for. Same concept at a dealership far as I see it. They did say they would take $100 off 4 hour extra from original quote,........ GaleForce likes this. Last edited by TcRocket; 03-16-2016 at 11:30 AM.

03-11-2016, 03:26 PM	#244 (permalink)
stefonelee Base Member Join Date: Jun 2015 Location: Columbus GA Posts: 60 Drives: 11 370z M6 Rep Power: 10	Are you going e85? Following your build and can't wait till its completed

03-13-2016, 07:31 PM	#247 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Still contemplating on how I'm going to get through the firewall. Didn't you have a good method jwick?

03-16-2016, 09:51 AM	#249 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	OK officially pissed. I'm having Nissan install my clutch and flywheel. Quoted me last summer for $500. They call me this am and tell me it's another 4 hours to install the cmc. Um........from my reading on here it has to be rebuild or replaced anyways during a clutch install unless they were figuring on using the original slave for the quote instead of my HD slave. I'm pissed and confused. Cmc has the be replaced or rebuilt. Am I wrong or are they screwing me. $800 for clutch install now.......wtf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM