BP turbo build/advice

dkznyc · 02-14-2016, 10:31 AM

Hey can anyone tell me how much oil they are using per oil change? Bp v2 with oil cooler.

PongSanity · 02-14-2016, 10:34 AM

Quote:

Originally Posted by TcRocket

Car already has oil temp gauge and has a light for low oil pressure. So I a gauge needed for oil psi?

My bad. OP and myself have a G37s so we need it. The 370z doesn't. So probably one innovate gauge for AFR and boost controller would be fine. Fuel tap w/ gauge or a return system will suffice for the fuel readings

Sent from my iPhone using Tapatalk

jwick · 02-14-2016, 12:08 PM

Quote:

Originally Posted by TcRocket

Fuel pressure gauge questions have been answered. Now to oil pressure gauge. How important is that given in event of low oil pressure a light will be activated? I'm going with innovate boost control that will show a/f and boost psi and also had safety cut for low a/f. Just trying to figure out if I need two gauge or one gauge pod.

I recommend an oil pressure gauge. If you use the light on the dash all its going to tell you us you blew your engine.

TcRocket · 02-14-2016, 01:41 PM

Quote:

Originally Posted by jwick

I recommend an oil pressure gauge. If you use the light on the dash all its going to tell you us you blew your engine.

Pretty much where is leaning towards, just for the piece of mind at the very least. Gale force two pod pillar it is then. Now to find my oil pressure gauge of choice. Prob analog. Digital might be annoying given its changing all the time. I know it's in other threads but what psi is the 3.7 vqvhr run. Gauge range I'm looking for.

PongSanity · 02-14-2016, 04:47 PM

Aem oil pressure gauge then. Digital more accurate though.

Sent from my iPhone using Tapatalk

TcRocket · 02-15-2016, 10:56 AM

[IMG[/IMG]

Quote:

Originally Posted by PongSanity

Aem oil pressure gauge then. Digital more accurate though.

Sent from my iPhone using Tapatalk

Nope just order this and GaleForce dual a pillar.....

Chuck33079 · 02-15-2016, 11:15 AM

Does that have a warning light in it?

TcRocket · 02-15-2016, 11:28 AM

No but I have eyes that will be keeping close attention on my gauges.......

Analog will be very obvious at least to me. Although I'm sure I could come up with something given I am a journeyman electrician with an education from msu...

TcRocket · 02-18-2016, 12:51 AM

So this kit already has a extra bung welded in for my m.a.f. in my innovate boost controller?

Edit: meant to say o2 sensor that is part of innovate boost controller

PongSanity · 02-18-2016, 08:30 AM

you can tee into the wastegate vacuum source off the intake manifold, or tee into the brake booster vacuum line. I'm getting a vacuum block for those two (for my build). I don't want to tap my manifold.

jwick · 02-18-2016, 08:42 AM

There's also a bung installed to the intake manifold for the BOV. I just had Sasha include a second bung and tapped the manifold twice.

jwick · 02-18-2016, 08:48 AM

This is a diagram of my vacuum lines. On top of the items for the kit I have both a Boost Gauge and Boost Controller plumbed in.

TcRocket · 02-18-2016, 10:20 AM

Quote:

Originally Posted by jwick

There's also a bung installed to the intake manifold for the BOV. I just had Sasha include a second bung and tapped the manifold twice.

I need a bung for my aftermarket innovate o2 sensor for af in the sg1. Not sure if I need to pm Sasha about having another one added at least 24" from turbo as pr install instructions. Or does that distance not affect that much?

TheWeez · 02-18-2016, 11:52 AM

Quote:

Originally Posted by TcRocket

I need a bung for my aftermarket innovate o2 sensor for af in the sg1. Not sure if I need to pm Sasha about having another one added at least 24" from turbo as pr install instructions. Or does that distance not affect that much?

I'm just going to replace the OEM O2 sensor with the wideband

jwick · 02-18-2016, 01:09 PM

Quote:

Originally Posted by TcRocket

I need a bung for my aftermarket innovate o2 sensor for af in the sg1. Not sure if I need to pm Sasha about having another one added at least 24" from turbo as pr install instructions. Or does that distance not affect that much?

You'll be fine just using the bung Sasha provides in the down pipe. I'm using it with no issues. If you think about it the fuel trim O2 sensors less than 18" from the block header flange and that heat doesn't cause them issues.

02-14-2016, 10:31 AM	#166 (permalink)
dkznyc Base Member Join Date: Mar 2014 Location: Queens NY Posts: 123 Drives: 370z 350z 300zxTT Rep Power: 11	Hey can anyone tell me how much oil they are using per oil change? Bp v2 with oil cooler. __________________ 370Z Monterey Blue 6MT Touring: PT 6266 Turbo, Tial BOV, Tial WG, 750cc injectors, AEM Truboost/Wideband, JWT Flywheel Clutch, Zspeed CSC, Stillen F+R Sway, Powertrix Coil, VLSD

02-15-2016, 11:15 AM	#172 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Does that have a warning light in it? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-15-2016, 11:28 AM	#173 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	No but I have eyes that will be keeping close attention on my gauges....... Analog will be very obvious at least to me. Although I'm sure I could come up with something given I am a journeyman electrician with an education from msu... Last edited by TcRocket; 02-15-2016 at 11:55 AM.

02-18-2016, 12:51 AM	#174 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	So this kit already has a extra bung welded in for my m.a.f. in my innovate boost controller? Edit: meant to say o2 sensor that is part of innovate boost controller Last edited by TcRocket; 02-18-2016 at 10:21 AM.

02-18-2016, 08:42 AM	#176 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	BP turbo build/advice There's also a bung installed to the intake manifold for the BOV. I just had Sasha include a second bung and tapped the manifold twice. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build Last edited by jwick; 02-18-2016 at 08:49 AM.

02-14-2016, 04:47 PM	#170 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Aem oil pressure gauge then. Digital more accurate though. Sent from my iPhone using Tapatalk

02-18-2016, 08:30 AM	#175 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	you can tee into the wastegate vacuum source off the intake manifold, or tee into the brake booster vacuum line. I'm getting a vacuum block for those two (for my build). I don't want to tap my manifold.

02-18-2016, 08:48 AM	#177 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	This is a diagram of my vacuum lines. On top of the items for the kit I have both a Boost Gauge and Boost Controller plumbed in. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM