BP turbo build/advice

TcRocket · 01-29-2016, 01:59 AM

Where do I find the pdf file?................................Got it, thanks theweez

Gregor12 · 01-29-2016, 02:16 AM

I see you're looking into gauges. Can't go wrong with innovative Motorsports. Also I didn't go pillar. Here's my thread on the gauge "swap" I personally would go boost, a/f, and oil pressure. Also take a look at Podi. They make very good quality parts and they're dual electronic gauges can save some space. But if you really want to ball out you should buy the Defi multi gauge. Spot on and shows all the data at once using hard wired sensors like any other "real" gauge. No obd2 ****.

Replaced my factory Gauges!

Edit. Just remembered you have a g37 lol.

Sent from my iPhone using Tapatalk

TcRocket · 01-29-2016, 01:25 PM

Thanks for the input. Yeah i don't think i have bid enough balls to do what you did. I will prob go with the gale force pillar. I know i want a/f, boost, oil pressure and fuel pressure. Lack of fuel=lean condition and melted pistons... Anyone know of a gauge that will show both oil and fuel pressure as i am limited to two pods with what i want to do

Gregor12 · 01-29-2016, 02:33 PM

Quote:

Originally Posted by TcRocket

Thanks for the input. Yeah i don't think i have bid enough balls to do what you did. I will prob go with the gale force pillar. I know i want a/f, boost, oil pressure and fuel pressure. Lack of fuel=lean condition and melted pistons... Anyone know of a gauge that will show both oil and fuel pressure as i am limited to two pods with what i want to do

Check out Podi for real. They're a/f uses the innovative sending unit so it's the same ****. But they have 2 in one gauges that work great. My buddy's been running them in his fully built gli for years. The sending United are also very responsive. Left my prosports in the dust when it came to accuracy lol

If you're really serious about saving space. Check this out.... It's the real deal
http://www.defi-shop.com/products/ad...zd/summary_zd/

Sent from my iPhone using Tapatalk

hc_416 · 01-29-2016, 04:19 PM

Quote:

Originally Posted by Gregor12

Check out Podi for real. They're a/f uses the innovative sending unit so it's the same ****. But they have 2 in one gauges that work great. My buddy's been running them in his fully built gli for years. The sending United are also very responsive. Left my prosports in the dust when it came to accuracy lol

If you're really serious about saving space. Check this out.... It's the real deal
ADVANCE ZD Summary | Defi - Exciting products by NS Japan

Sent from my iPhone using Tapatalk

I do like that unit, and it is not that much money, if it was only in a blueish color. I would like to drive it hard, and enter some shows so I would like a matching look. You can get the older style gauge for like 171 dollars on ebay with all the senors; seems like a steal to me. I am really looking for that GReddy one with three sensors. It would have boost, oil temp and oil pressure, I would then get a Invoate A/F along with a pillar pod. Thanks for all the advice guys, hopefully this weekend I can put up a few pictures before the work starts.

GaleForce · 01-29-2016, 05:13 PM

Quote:

Originally Posted by hc_416

I do like that unit, and it is not that much money, if it was only in a blueish color. I would like to drive it hard, and enter some shows so I would like a matching look. You can get the older style gauge for like 171 dollars on ebay with all the senors; seems like a steal to me. I am really looking for that GReddy one with three sensors. It would have boost, oil temp and oil pressure, I would then get a Invoate A/F along with a pillar pod. Thanks for all the advice guys, hopefully this weekend I can put up a few pictures before the work starts.

Have a look at the new multi gauges from Innovate Motorsports Digital Monitoring Products, Tuning Tools, & Controllers. Innovate Motorsports

1slow370 · 01-30-2016, 01:35 AM

Have you guys seen inovates new combined boost controler gauge/ wideband afr gauge? It is a boost controller, boost gauge, afr gauge, and it has afr to boost feedback so it can cut boost if you go lean = the shiz

Edit: check out the scg1

TcRocket · 01-30-2016, 02:17 AM

Quote:

Originally Posted by 1slow370

Have you guys seen inovates new combined boost controler gauge/ wideband afr gauge? It is a boost controller, boost gauge, afr gauge, and it has afr to boost feedback so it can cut boost if you go lean = the shiz

Edit: check out the scg1

I really like that setup. However we have two waste gates......

jwick · 01-30-2016, 02:20 AM

Quote:

Originally Posted by TcRocket

I really like that setup. However we have two waste gates......

That's not a problem. Just hook the solenoid up prior to teeing off to the two waste gates. That's how my boost control is hooked up now.

I will preface that I did not research the gauge in question.

GaleForce · 01-30-2016, 05:11 AM

I've been running an SCG-1 since it first came out. It's good stuff.

GaleForce · 01-30-2016, 05:17 AM

Untitled

TcRocket · 01-30-2016, 11:19 AM

Love the pic GaleForce..... Your car is so sexy....

. Think I will def be going with that gauge and boost controller. It must fit your pillar which I will be buying soon...

One more thing, I think I'm going to get should of sasha and make an order change. I ordered open dump waste gates. Upon even more research I think they'll be way too loud. And I want to try and see if I can change to a hks bov.

hc_416 · 01-30-2016, 11:23 AM

I did look at the sg 1, I did not like that it had no boost by gear, so I went with the profec. I could not find the GReddy gauge but I was told in q-2-3 they will be releasing a new gauge. I do like the temp/af from Invoate but I am being a little indecisiveness. Going to work on the clutch next. I will email Zspeed to see if they have a Soutbend equivalent of a twin disk.

TcRocket · 01-30-2016, 11:36 AM

Yeah the boost by gear would be really nice. 1st gear is going to be a handful. Innovate does not have the boost by gear from what I see but I really like the gauge. My right foot can be the boost control too lol

jwick · 01-30-2016, 11:46 AM

The best way to set that up is to just run WG pressure in first and second gear and then full boost third and up. You aren't going to get traction in first even at WG pressure WOT. I typically short shift first into second.

01-29-2016, 01:59 AM	#76 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Where do I find the pdf file?................................Got it, thanks theweez Last edited by TcRocket; 01-29-2016 at 01:19 PM.

01-29-2016, 02:16 AM	#77 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 12	BP turbo build/advice I see you're looking into gauges. Can't go wrong with innovative Motorsports. Also I didn't go pillar. Here's my thread on the gauge "swap" I personally would go boost, a/f, and oil pressure. Also take a look at Podi. They make very good quality parts and they're dual electronic gauges can save some space. But if you really want to ball out you should buy the Defi multi gauge. Spot on and shows all the data at once using hard wired sensors like any other "real" gauge. No obd2 ***. Replaced my factory Gauges! Edit. Just remembered you have a g37 lol. Sent from my iPhone using Tapatalk Last edited by Gregor12; 01-29-2016 at 04:52 AM.*

01-30-2016, 01:35 AM	#82 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Have you guys seen inovates new combined boost controler gauge/ wideband afr gauge? It is a boost controller, boost gauge, afr gauge, and it has afr to boost feedback so it can cut boost if you go lean = the shiz Edit: check out the scg1 __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-30-2016, 05:11 AM	#85 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	I've been running an SCG-1 since it first came out. It's good stuff. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-30-2016, 05:17 AM	#86 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Untitled EliteXpress, Memphis370Z and TheWeez like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-29-2016, 01:25 PM	#78 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Thanks for the input. Yeah i don't think i have bid enough balls to do what you did. I will prob go with the gale force pillar. I know i want a/f, boost, oil pressure and fuel pressure. Lack of fuel=lean condition and melted pistons... Anyone know of a gauge that will show both oil and fuel pressure as i am limited to two pods with what i want to do

01-30-2016, 11:19 AM	#87 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Love the pic GaleForce..... Your car is so sexy..... Think I will def be going with that gauge and boost controller. It must fit your pillar which I will be buying soon... One more thing, I think I'm going to get should of sasha and make an order change. I ordered open dump waste gates. Upon even more research I think they'll be way too loud. And I want to try and see if I can change to a hks bov.

01-30-2016, 11:23 AM	#88 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	I did look at the sg 1, I did not like that it had no boost by gear, so I went with the profec. I could not find the GReddy gauge but I was told in q-2-3 they will be releasing a new gauge. I do like the temp/af from Invoate but I am being a little indecisiveness. Going to work on the clutch next. I will email Zspeed to see if they have a Soutbend equivalent of a twin disk.

01-30-2016, 11:36 AM	#89 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	Yeah the boost by gear would be really nice. 1st gear is going to be a handful. Innovate does not have the boost by gear from what I see but I really like the gauge. My right foot can be the boost control too lol

01-30-2016, 11:46 AM	#90 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	BP turbo build/advice The best way to set that up is to just run WG pressure in first and second gear and then full boost third and up. You aren't going to get traction in first even at WG pressure WOT. I typically short shift first into second. GaleForce likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM