BP turbo build/advice

TopgunZ · 01-22-2016, 05:07 PM

It also depends on how smoothly everything goes. You can get a big head start by downloading the PDF of the build instructions and doing as much for-work as possible.

Things like: Taking off bumper, crash bar, intakes, sway bar, manifold, injectors, plugs, cats, pump, etc.... Then when your kit shows up you can just start whipping that shitt on.

I bet you could have it all on in 20-25 hours if you do all the removal work before you get the kit.

After having done it already I bet a guy could put this kit on in a single weekend if he didn't have to reference the instructions and everything went smoothly.

stefonelee · 01-22-2016, 05:17 PM

Thanks guys for the heads up. I will get a head start on it this weekend. The only thing I'm not looking forward to is the demon bolt removal.

jwick · 01-22-2016, 05:31 PM

Quote:

Originally Posted by TopgunZ

It also depends on how smoothly everything goes. You can get a big head start by downloading the PDF of the build instructions and doing as much for-work as possible.

Things like: Taking off bumper, crash bar, intakes, sway bar, manifold, injectors, plugs, cats, pump, etc.... Then when your kit shows up you can just start whipping that shitt on.

I bet you could have it all on in 20-25 hours if you do all the removal work before you get the kit.

After having done it already I bet a guy could put this kit on in a single weekend if he didn't have to reference the instructions and everything went smoothly.

Just kit with no jewelry, I'm pretty sure a couple guys could knock this out in one weekend if one of them had done it before. It'd be a long as weekend though. Of course the V-1.5-2 IC piping helped a ton with install time.

GaleForce · 01-23-2016, 01:10 AM

A long weekend (4 days) for install is easily doable.

EliteXpress · 01-23-2016, 12:48 PM

Anyone running Oil Catch Can with there BP Kit?

jwick · 01-23-2016, 01:03 PM

I want to but on top of a good setup being pretty pricey, I haven't found a good location for it in an already crowded engine bay.

mad_jelly · 01-23-2016, 01:15 PM

I threw both oil coolers behind the intercooler, relocated the ps cooler, relocated windshield wipe res, and threw a custom dual saikou michi on the driver side

jwick · 01-23-2016, 01:21 PM

Quote:

Originally Posted by mad_jelly

I threw both oil coolers behind the intercooler, relocated the ps cooler, relocated windshield wipe res, and threw a custom dual saikou michi on the driver side

Picture?

jwick · 01-23-2016, 01:22 PM

Quote:

Originally Posted by EliteXpress

Anyone running Oil Catch Can with there BP Kit?

I did go beat on the car last night in this 40deg weather. I forgot how much faster it is below 50.

EliteXpress · 01-23-2016, 01:31 PM

Quote:

Originally Posted by jwick

I did go beat on the car last night in this 40deg weather. I forgot how much faster it is below 50.

Yeah I was out last night imagining myself in some B00ST!

There is quite a few catch cans on the market with low cost involved.

hc_416 · 01-23-2016, 04:11 PM

Hey guys, I have a quick question about gauges, what do you guys think about the GReddy multi gauge?

16001710
GReddy

I would have to buy the gauge then a few addons. Does anyone run these gauges? and would they fit in a side pillar?

As far the catch can, I believe I will get one as some point, but that is lower on the list ATM. I want to buy the gauges and bc by the end of sunday.

jwick · 01-23-2016, 04:42 PM

Quote:

Originally Posted by hc_416

Hey guys, I have a quick question about gauges, what do you guys think about the GReddy multi gauge?

16001710
GReddy

I would have to buy the gauge then a few addons. Does anyone run these gauges? and would they fit in a side pillar?

As far the catch can, I believe I will get one as some point, but that is lower on the list ATM. I want to buy the gauges and bc by the end of sunday.

I run that gauge. It's great but it's discontinued.

hc_416 · 01-23-2016, 06:36 PM

Quote:

Originally Posted by jwick

I run that gauge. It's great but it's discontinued.

Is there any place that still sells it?

jwick · 01-24-2016, 12:53 AM

Quote:

Originally Posted by hc_416

Is there any place that still sells it?

Not that I know of

hc_416 · 01-28-2016, 10:04 PM

Updated OP.

01-22-2016, 05:07 PM	#61 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	It also depends on how smoothly everything goes. You can get a big head start by downloading the PDF of the build instructions and doing as much for-work as possible. Things like: Taking off bumper, crash bar, intakes, sway bar, manifold, injectors, plugs, cats, pump, etc.... Then when your kit shows up you can just start whipping that shitt on. I bet you could have it all on in 20-25 hours if you do all the removal work before you get the kit. After having done it already I bet a guy could put this kit on in a single weekend if he didn't have to reference the instructions and everything went smoothly. TheWeez likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-23-2016, 01:10 AM	#64 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	A long weekend (4 days) for install is easily doable. onzedge likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-23-2016, 01:03 PM	#66 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	I want to but on top of a good setup being pretty pricey, I haven't found a good location for it in an already crowded engine bay. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM

01-22-2016, 05:17 PM	#62 (permalink)
stefonelee Base Member Join Date: Jun 2015 Location: Columbus GA Posts: 60 Drives: 11 370z M6 Rep Power: 10	Thanks guys for the heads up. I will get a head start on it this weekend. The only thing I'm not looking forward to is the demon bolt removal.

01-23-2016, 12:48 PM	#65 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	Anyone running Oil Catch Can with there BP Kit?

01-23-2016, 01:15 PM	#67 (permalink)
mad_jelly Base Member Join Date: Mar 2012 Location: VA Posts: 56 Drives: 84 Mazda GLC Rep Power: 13	I threw both oil coolers behind the intercooler, relocated the ps cooler, relocated windshield wipe res, and threw a custom dual saikou michi on the driver side

01-23-2016, 04:11 PM	#71 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Hey guys, I have a quick question about gauges, what do you guys think about the GReddy multi gauge? 16001710 GReddy I would have to buy the gauge then a few addons. Does anyone run these gauges? and would they fit in a side pillar? As far the catch can, I believe I will get one as some point, but that is lower on the list ATM. I want to buy the gauges and bc by the end of sunday.

01-28-2016, 10:04 PM	#75 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Updated OP.