BP turbo build/advice

hc_416 · 11-02-2018, 08:34 PM

well an update... My turbo seems to have broke i have oil out of the tail pipe and oil leaking by the turbo... it now makes no boost. I'm thinking damage to one of the wheels inside. Maybe ill get that ATS - V!

solidus · 11-03-2018, 12:57 AM

If you're still running an exapump I have a damned near new 6466 1.32ar to sell for cheap.

hc_416 · 11-03-2018, 11:11 AM

thanks for the offer, but i'm just looking to rebuild the turbo. I want to take it all apart and make sure its not just a blow seal first. If it is not, ill see if Sasha can get me a new cartridge.

jwick · 11-03-2018, 11:21 AM

Quote:

Originally Posted by hc_416

thanks for the offer, but i'm just looking to rebuild the turbo. I want to take it all apart and make sure its not just a blow seal first. If it is not, ill see if Sasha can get me a new cartridge.

This the Comp turbo?

hc_416 · 11-03-2018, 01:59 PM

Quote:

Originally Posted by jwick

This the Comp turbo?

No sir, its the 6266 bb one.

jwick · 11-03-2018, 04:12 PM

Quote:

Originally Posted by hc_416

No sir, its the 6266 bb one.

Are you sure the exa pump is working?

Jinxx · 11-03-2018, 04:25 PM

Quote:

Originally Posted by jwick

Are you sure the exa pump is working?

If the scavenge pump failed that would explain oil getting down the exhaust but he should still be able to build boost ...now I would assume if the pump failed it could have blown the seals out ...prolly needs new turbo seals and check the scavenge pump

hc_416 · 11-03-2018, 04:34 PM

Quote:

Originally Posted by Jinxx

If the scavenge pump failed that would explain oil getting down the exhaust but he should still be able to build boost ...now I would assume if the pump failed it could have blown the seals out ...prolly needs new turbo seals and check the scavenge pump

cool thanks for the advice, I will check that out!

hc_416 · 11-03-2018, 04:39 PM

Hey does anyone have a link to the install kit? I want to make sure if I take it apart it will go back together.

solidus · 11-03-2018, 04:46 PM

I just went through this with the exapump. Check the exhaust , and also the intercooler. My wiring for the exapump got nicked during motor install. Had oil everywhere. Ended up having to soak the muffler in a bucket of gas to get rid of the smoke. Oh, and taking the turbo off is simple. It's just on the flange for the manifold, no need to take off anything other than oil lines and the lower charge pipe.

Jinxx · 11-03-2018, 05:23 PM

So with the issues you guys are having with the oil fed and scavenge pump why not switch to the comp oil less turbo

hc_416 · 11-03-2018, 08:37 PM

Quote:

Originally Posted by solidus

I just went through this with the exapump. Check the exhaust , and also the intercooler. My wiring for the exapump got nicked during motor install. Had oil everywhere. Ended up having to soak the muffler in a bucket of gas to get rid of the smoke. Oh, and taking the turbo off is simple. It's just on the flange for the manifold, no need to take off anything other than oil lines and the lower charge pipe.

I took off the intake pipe at the main and didn't see any oil, I'm hoping it just shot int he exhaust. If so ill just get a new one, i need to put a cat in anyway to pass emissions. Gonna start next week, to much work and real life stuff. what do you guys think about the ats v ?

solidus · 11-04-2018, 10:48 AM

Quote:

Originally Posted by Jinxx

So with the issues you guys are having with the oil fed and scavenge pump why not switch to the comp oil less turbo

I would have right vefore I did the 6870 but I didn't even think of it till Sasha said something. Scavenge pump isn't really so much a problem as it is a temperamental bastard. First failure I had was from pieces in the system with my engine pop. Replacing it was easy. This last time a wire got snagged during the built block process.

Sent from my SM-G965U using Tapatalk

jwick · 11-04-2018, 11:57 AM

Quote:

Originally Posted by Jinxx

So with the issues you guys are having with the oil fed and scavenge pump why not switch to the comp oil less turbo

There have been more issues with the Comp turbo than with the exa pump.

jwick · 11-04-2018, 11:58 AM

Quote:

Originally Posted by solidus

I would have right vefore I did the 6870 but I didn't even think of it till Sasha said something. Scavenge pump isn't really so much a problem as it is a temperamental bastard. First failure I had was from pieces in the system with my engine pop. Replacing it was easy. This last time a wire got snagged during the built block process.

Sent from my SM-G965U using Tapatalk

None of that is the pumps problem.

11-02-2018, 08:34 PM	#451 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	well an update... My turbo seems to have broke i have oil out of the tail pipe and oil leaking by the turbo... it now makes no boost. I'm thinking damage to one of the wheels inside. Maybe ill get that ATS - V! Last edited by hc_416; 11-03-2018 at 11:12 AM. Reason: spelling

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 08:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 10:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 01:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 09:24 AM

11-03-2018, 12:57 AM	#452 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	If you're still running an exapump I have a damned near new 6466 1.32ar to sell for cheap.

11-03-2018, 11:11 AM	#453 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	thanks for the offer, but i'm just looking to rebuild the turbo. I want to take it all apart and make sure its not just a blow seal first. If it is not, ill see if Sasha can get me a new cartridge.

11-03-2018, 04:39 PM	#459 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Hey does anyone have a link to the install kit? I want to make sure if I take it apart it will go back together.

11-03-2018, 04:46 PM	#460 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	I just went through this with the exapump. Check the exhaust , and also the intercooler. My wiring for the exapump got nicked during motor install. Had oil everywhere. Ended up having to soak the muffler in a bucket of gas to get rid of the smoke. Oh, and taking the turbo off is simple. It's just on the flange for the manifold, no need to take off anything other than oil lines and the lower charge pipe.

11-03-2018, 05:23 PM	#461 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	So with the issues you guys are having with the oil fed and scavenge pump why not switch to the comp oil less turbo