BP V 2.0 turbo kits...ROUND 3 place your order now

YzGyz · 03-04-2016, 12:56 PM

I have the left overs. I'm trying to see which one is missing so I know which one is in the WG.

YzGyz

Chuck33079 · 03-04-2016, 12:57 PM

Quote:

Originally Posted by YzGyz

Can somebody that a really good picture of all the springs in in the wastegate box and post it for me please. I'm trying to see which one I put in mine by process of elimination. I don't want to Uninstall the WG if I don't have to.

YzGyz

Couldn't you turn off your boost controller and see what peak boost it hits?

YzGyz · 03-04-2016, 01:25 PM

The EBC is my boost Guage unfortunately.. I guess I could 00 the Duty cycle and it will read the spring.

YzGyz

Chuck33079 · 03-04-2016, 01:29 PM

Oh, I figured you had a standalone boost gauge. Never mind, carry on.

YzGyz · 03-04-2016, 11:54 PM

Well, I set the EBC to 00 so it runs at WG pressure. The EBC read max psi of 13 lbs on waste gate. I'm going to have to take the WGs off and take a look at what I put inside. As far as I know, I have been boosting at 13lbs all this time. The AFR has always been great since tune. Johnny my tuner tuned my car for 12 lbs so I have been 1lb over all this time. I'll also have to take a look at how the solenoid was hooked up again. Hopefully I can figure it out. Back on the lift it goes.

There are the spring I did not use.

YzGyz

jwick · 03-05-2016, 01:47 AM

13 lbs is almost a bar of pressure. You can't do that with only one spring. I'm guessing you aren't reading the EBC settings properly.

YzGyz · 03-05-2016, 01:55 AM

Most probably right J. I'll reread the instructions and watch the video again.

ninja edit. probably better in EBC thread

Boosted Performance · 03-06-2016, 11:14 PM

What a long work weekend....the good news, 4 kits are going out tomorrow, and the last two orders will be going out on Wednesday.

That is a total of 9 kits sold.

Thank you very much for your business.

The IC pipes will ship out later this week directly from my supplier.

jwick · 03-06-2016, 11:34 PM

New BP brothers coming!

hc_416 · 03-07-2016, 10:34 AM

Quote:

Originally Posted by Boosted Performance

What a long work weekend....the good news, 4 kits are going out tomorrow, and the last two orders will be going out on Wednesday.

That is a total of 9 kits sold.

Thank you very much for your business.

The IC pipes will ship out later this week directly from my supplier.

Looking forward to it!!

1cleanZ · 03-07-2016, 11:17 AM

I'm curious if any of you went with 1.0 A/R vs the 1.15 A/R?? And if so, why? I'm also curious if anyone in here has driven one of each to determine the differences in turbo spool up and timing. I would imagine Vince at R/T may be able to chime in on this question as well which I'll probably shoot him an email now and relay back.

Thanks all!

TheWeez · 03-07-2016, 05:01 PM

Starting to come along. Hopefully everything will be here before next Friday!

beemerkid · 03-07-2016, 06:33 PM

Quote:

Originally Posted by 1cleanZ

I'm curious if any of you went with 1.0 A/R vs the 1.15 A/R?? And if so, why? I'm also curious if anyone in here has driven one of each to determine the differences in turbo spool up and timing. I would imagine Vince at R/T may be able to chime in on this question as well which I'll probably shoot him an email now and relay back.

Thanks all!

Im also curious as to this...id prefer a quicker spool as my power goals are a bit more conservative than most cause the z is my preferred DD.

YzGyz · 03-07-2016, 07:49 PM

Quote:

Originally Posted by TheWeez

Starting to come along. Hopefully everything will be here before next Friday!

WTH!! my uprev came in a white paper box with a sticker telling me to download the program on there site!! Nothing fancy like that!!

It looks like your putting things away not putting them on.

Don't you love getting presents?
YzGyz

TheWeez · 03-07-2016, 07:51 PM

Haha I don't wanna play with anything until it's all here and bang it out in 3 days

Sent from my iPhone using Tapatalk

03-04-2016, 12:56 PM	#166 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I have the left overs. I'm trying to see which one is missing so I know which one is in the WG. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

03-04-2016, 01:25 PM	#168 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	The EBC is my boost Guage unfortunately.. I guess I could 00 the Duty cycle and it will read the spring. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

03-04-2016, 01:29 PM	#169 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Oh, I figured you had a standalone boost gauge. Never mind, carry on. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-04-2016, 11:54 PM	#170 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Well, I set the EBC to 00 so it runs at WG pressure. The EBC read max psi of 13 lbs on waste gate. I'm going to have to take the WGs off and take a look at what I put inside. As far as I know, I have been boosting at 13lbs all this time. The AFR has always been great since tune. Johnny my tuner tuned my car for 12 lbs so I have been 1lb over all this time. I'll also have to take a look at how the solenoid was hooked up again. Hopefully I can figure it out. Back on the lift it goes. There are the spring I did not use. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz Last edited by YzGyz; 03-05-2016 at 12:04 AM.

03-05-2016, 01:47 AM	#171 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	13 lbs is almost a bar of pressure. You can't do that with only one spring. I'm guessing you aren't reading the EBC settings properly. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-05-2016, 01:55 AM	#172 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Most probably right J. I'll reread the instructions and watch the video again. ninja edit. probably better in EBC thread __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz Last edited by YzGyz; 03-05-2016 at 06:27 PM.

03-06-2016, 11:14 PM	#173 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	What a long work weekend....the good news, 4 kits are going out tomorrow, and the last two orders will be going out on Wednesday. That is a total of 9 kits sold. Thank you very much for your business. The IC pipes will ship out later this week directly from my supplier. PongSanity, stefonelee, TcRocket and 1 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

03-06-2016, 11:34 PM	#174 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	New BP brothers coming! TechnicZ and stefonelee like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-07-2016, 11:17 AM	#176 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	I'm curious if any of you went with 1.0 A/R vs the 1.15 A/R?? And if so, why? I'm also curious if anyone in here has driven one of each to determine the differences in turbo spool up and timing. I would imagine Vince at R/T may be able to chime in on this question as well which I'll probably shoot him an email now and relay back. Thanks all! __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

03-07-2016, 07:51 PM	#180 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	Haha I don't wanna play with anything until it's all here and bang it out in 3 days Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 11:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 06:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 07:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 01:23 PM