BP V 2.0 turbo kits...ROUND 3 place your order now

GaleForce · 04-08-2016, 09:02 AM

Quote:

Originally Posted by TcRocket

At freeway speeds I'll be into boost. My tuner is a couple hours away. Still be OK?

No problem. I drove from Toronto to Pensilvania on the original base tune. Lots of freeway driving.

Boosted Performance · 04-08-2016, 10:55 AM

Gentlemen, there is absolutely no issues with driving the car for an extended period of time on the base map. It is derived from a BP twin scrolled car tuned to 10psi of boost.

I would however strongly dicourage wide open throttle pulls before a custom tune is done. There could be slight variances in each car thar could impact the tune compatability, which could lead to damage to the engine.

So don't hesitate to drive the cars on these base maps, just don't abuse them until they are properly tuned on a dyno.

TheWeez · 04-08-2016, 11:09 AM

Quote:

Originally Posted by Boosted Performance

Gentlemen, there is absolutely no issues with driving the car for an extended period of time on the base map. It is derived from a BP twin scrolled car tuned to 10psi of boost.

I would however strongly dicourage wide open throttle pulls before a custom tune is done. There could be slight variances in each car thar could impact the tune compatability, which could lead to damage to the engine.

So don't hesitate to drive the cars on these base maps, just don't abuse them until they are properly tuned on a dyno.

So is it necessary to get the Ecu part number because I don't own a Windows computer, will a standard tune work for me if I'm only driving 4 miles to my tuner

Boosted Performance · 04-08-2016, 11:36 AM

Quote:

Originally Posted by TheWeez

So is it necessary to get the Ecu part number because I don't own a Windows computer, will a standard tune work for me if I'm only driving 4 miles to my tuner

If you are getting a base map from me, then yes, I need the ECU part number....just the way UpRev works.

Not sure what a "standard tune" is.

I can't remember that UpRev only uses Windows OS...if so, maybe borrowing a friends laptop would be a possible solution.

YzGyz · 04-08-2016, 12:26 PM

Get a tab or laptop. Your going to want to be about ty O use the ecu scanning tool to help diagnose codes and stuff if they come up.

ShaSha, do the air filter that come with the kit required reading oiling or anything after washing them or do we simply wash, let dry and reinstall?

Yzgyz

Boosted Performance · 04-08-2016, 02:16 PM

Quote:

Originally Posted by YzGyz

Get a tab or laptop. Your going to want to be about ty O use the ecu scanning tool to help diagnose codes and stuff if they come up.

ShaSha, do the air filter that come with the kit required reading oiling or anything after washing them or do we simply wash, let dry and reinstall?

Yzgyz

See link:

https://www.greenfilterusa.com/filte...aintenance.php

solidus · 04-08-2016, 03:20 PM

Quote:

Originally Posted by TheWeez

So is it necessary to get the Ecu part number because I don't own a Windows computer, will a standard tune work for me if I'm only driving 4 miles to my tuner

Uprev only works with windows. Do yourself a huge favor and get a refurbished Surface Pro running windows 8. Ive been looking for one lately because I did my Titan, G37 and the Z with a 15" laptop and its a PITA. Any tablet that runs full windows 8 and make sure its over 8" unless you get a stylus or have really skinny fingers.

EliteXpress · 04-09-2016, 01:32 AM

Now with just 1,700 miles on the odometer had Fast Intentions TDXCat Back Exhaust, Z1 Clutch W/ 6 Puck, Light Weight Flywheel, ZSpeed CSC, and some fresh Rotella T6 oil installed Today!

TcRocket · 04-09-2016, 03:14 AM

Quote:

Originally Posted by EliteXpress

Now with just 1,700 miles on the odometer had Fast Intentions TDXCat Back Exhaust, Z1 Clutch W/ 6 Puck, Light Weight Flywheel, ZSpeed CSC, and some fresh Rotella T6 oil installed Today!

Let me know how that Six puck drives bro........

EliteXpress · 04-09-2016, 03:35 AM

Quote:

Originally Posted by TcRocket

Let me know how that Six puck drives bro........

I can already tell you bang for the buck you can't go wrong, this clutch pretty much feels stock for the most part. I really thought it was going to be a night and day difference, but it's not. A little grabby in first gear but not by much with a little chatter once warm in neutral, other than that she's good to go!

TheWeez · 04-09-2016, 07:27 AM

No idea what these are lol

Sent from my iPhone using Tapatalk

1cleanZ · 04-09-2016, 09:11 AM

Quote:

Originally Posted by TheWeez

No idea what these are lol

Sent from my iPhone using Tapatalk

read your directions again. Its for your manifold ports

TheWeez · 04-09-2016, 09:20 AM

You tap the manifold 3x?

Sent from my iPhone using Tapatalk

jwick · 04-09-2016, 10:01 AM

Quote:

Originally Posted by EliteXpress

I can already tell you bang for the buck you can't go wrong, this clutch pretty much feels stock for the most part. I really thought it was going to be a night and day difference, but it's not. A little grabby in first gear but not by much with a little chatter once warm in neutral, other than that she's good to go!

That's basically my report on their full face disk. Stock engagement, easy shifts, loud as hell and pressure about 50% stouter than stock.

jwick · 04-09-2016, 10:02 AM

Quote:

Originally Posted by TheWeez

You tap the manifold 3x?

Sent from my iPhone using Tapatalk

Per instructions you tap it once for BOV. Sasha includes the second tap in case you want to tap for boost control or something.

I tapped it twice, BOV and Boost gauge map sensor.

04-08-2016, 10:55 AM	#272 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Gentlemen, there is absolutely no issues with driving the car for an extended period of time on the base map. It is derived from a BP twin scrolled car tuned to 10psi of boost. I would however strongly dicourage wide open throttle pulls before a custom tune is done. There could be slight variances in each car thar could impact the tune compatability, which could lead to damage to the engine. So don't hesitate to drive the cars on these base maps, just don't abuse them until they are properly tuned on a dyno. jwick and GaleForce like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

04-08-2016, 12:26 PM	#275 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Get a tab or laptop. Your going to want to be about ty O use the ecu scanning tool to help diagnose codes and stuff if they come up. ShaSha, do the air filter that come with the kit required reading oiling or anything after washing them or do we simply wash, let dry and reinstall? Yzgyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

04-09-2016, 07:27 AM	#281 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	No idea what these are lol Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-09-2016, 09:20 AM	#283 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	You tap the manifold 3x? Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 11:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 06:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 07:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 01:23 PM