Stage 2 sc build has begun

theDreamer · 06-22-2016, 10:21 AM

Quote:

Originally Posted by tiller

Only had to replace the passenger side mount with my kit and they do supply bolts for installation to block but you reuse lower bolt to chassis,also I made a small tool to tighten the block bolts if someone is at the step so I didn't have to remove exhaust manifold.

Quote:

Originally Posted by Jinxx

I only replace the passenger side motor mounts ...I read that doing both made for heavy vibration and was recommended to leave the driver side stock

I only have the 1.5 kit so only doing the passenger side.
We have mocked up a tool so we do not have to take off the exhaust manifold and tighten the bolts down. Good to know about re-using the bolt for the chassis, will see how I can go about getting it off the old engine mount.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 06:04 AM
GTM Stage 1.5 Supercharged Roadster Build	JVerge5363	Forced Induction	26	06-13-2014 11:02 AM
FRYZIA23 GTM stage 1.5 S/C build	fryzia23	Forced Induction	91	01-15-2014 11:20 PM
New GTM stage 2 TT build	Billy02987	Forced Induction	212	06-04-2011 03:56 PM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 10:34 AM