Stage 2 sc build has begun

tiller · 04-24-2016, 03:55 PM

Quote:

Originally Posted by Jinxx

I don't have a fuel pressure gauge ...and I think it would have been fine with the 92mm pulley and prolly a little rich .....but after changing to the 85mm pulley the boost comes on much sooner and running 40-50% more boost ..requiring more fuel ..once I get the return fuel system to be able to increase the fuel pressure as boost increases it should be good...I would think the 92mm would have ran around 450ish whp.....

Stock fuel pressure is 52 ...as boost increases it drops soooo with 8lbs pulley fuel pressure would be 44lbs which would support the boost ...with the 12lbs pulley pressure would be around 40lbs and not enough for the boost .....no real way to increase it without the return system

Even 450whp is alot on these cars,hows it on the road,like traction etc,break loose alot?

Jinxx · 04-24-2016, 04:25 PM

You will lose traction if you are aggressive with the clutch ......when I was running everytime I shifted gears it would break traction ...back end would kick out a little each gear ....I really like the difference between the 92 and 85 pulley tho ....power comes on much sooner

tiller · 04-26-2016, 03:40 PM

Quote:

Originally Posted by Jinxx

You will lose traction if you are aggressive with the clutch ......when I was running everytime I shifted gears it would break traction ...back end would kick out a little each gear ....I really like the difference between the 92 and 85 pulley tho ....power comes on much sooner

Ya I ordered the 85mm to have on stand by already lol,haven't even driven the car yet,can't beat that price,I'll be taking it out this Sunday for a ride with no bumper to make sure blow off valve is adjusted properly then I'll update on my boost experience

Hooked up my innovate db gauge with lc2 to log for seb at specialtyz,everything looks good in the AFR department so far

Jinxx · 04-26-2016, 06:43 PM

You will need the fuel return system with that pulley

But .... That pulley is sooooo much better lol

tiller · 04-28-2016, 04:19 PM

Quote:

Originally Posted by Jinxx

You will need the fuel return system with that pulley

But .... That pulley is sooooo much better lol

Ya iam happy to run the 92mm for now,iam sure it will be enough boost ,car hasent even been on the road yet and I got the pulley for future fun lol

Jinxx · 04-28-2016, 04:37 PM

Why go through the retuning ..... Slap it on there pay for one tune and be done that's the main reason I haven't done the custom tune yet ... Wanna make sure I have what I needed ...pulley ... And fuel system to support it .... The tune once and all fun after that .......till it blows lol

tiller · 04-28-2016, 06:54 PM

Quote:

Originally Posted by Jinxx

Why go through the retuning ..... Slap it on there pay for one tune and be done that's the main reason I haven't done the custom tune yet ... Wanna make sure I have what I needed ...pulley ... And fuel system to support it .... The tune once and all fun after that .......till it blows lol

Sebs real good, he will set me up on either pulley

Built short block is next lol

tiller · 04-30-2016, 10:39 PM

Got an oil leak on oil cooler line from gamma,waiting on gamma for replacement line

Jinxx · 05-01-2016, 12:15 AM

I got my oil cooler from z1 ....hoses were serviceable and I had to cut them down shorter ... Still have enough hose to replace the lines if needed

tiller · 05-01-2016, 08:33 PM

What did you decide on for a fuel return system?

Jinxx · 05-01-2016, 10:13 PM

I'm gonna go with the cjm kit .... Once I break down and order it ..won't be much longer ......then I'll set up a custom tune .....

tiller · 05-12-2016, 08:07 PM

Well to start,I got a few miles on my stage 2 sc kit now,quality of the kit is a 10,the car drives and feels like stock while driving normal,the boost is addictive, all other upgrades I did with the kit like csf rad,thermostatic oil cooler kit are a huge change,car runs alot cooler,ecutek tunning is great,I can't say enough about seb at specialty,he is awesome to work with, gamma has been nothing but good to be with service and parts,iam still working towards the best tune with seb n ecutek,I have the smaller pulley on my sc(92)but so far feel feels great and has more then enough power,I also have the 85mm pulley but will hold off on it and keep enjoying driving my z,future upgrades include clutch\flywheel,stabilizer bars,tires etc the list will go on,also I'd like to do a built short block in future aswell,I did all the work so far on my car and it has been great,cars are built not bought,u can't really appreciate the full fun of a car if you didn't build it yourself,just my opinion,thanks guys on the forum for any help and thanks to the guys that run the forum for letting me post on here,I'll update as more parts show up

tiller · 05-12-2016, 09:34 PM

IMG_20160501_140541.jpg

Jinxx · 05-12-2016, 10:47 PM

Glad to hear everything is running good ....keep in mind when you go to the 85mm pulley you will need to go with the upgraded fuel system ....mine should be here in a few days and can't wait to get it tuned up right

tiller · 05-13-2016, 03:22 PM

Quote:

Originally Posted by Jinxx

Glad to hear everything is running good ....keep in mind when you go to the 85mm pulley y will need to go with the he eternals fuel system ....mine should be here in a few days and can't wait to get it tuned up right

Ya gona run the 92mm for a bit,I always ran my car near redline when it was stock and like now the power comes on but eventually will go to the 85mm.

What brand of fuel system did u decide on?

05-12-2016, 08:07 PM	#162 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Well to start,I got a few miles on my stage 2 sc kit now,quality of the kit is a 10,the car drives and feels like stock while driving normal,the boost is addictive, all other upgrades I did with the kit like csf rad,thermostatic oil cooler kit are a huge change,car runs alot cooler,ecutek tunning is great,I can't say enough about seb at specialty,he is awesome to work with, gamma has been nothing but good to be with service and parts,iam still working towards the best tune with seb n ecutek,I have the smaller pulley on my sc(92)but so far feel feels great and has more then enough power,I also have the 85mm pulley but will hold off on it and keep enjoying driving my z,future upgrades include clutch\flywheel,stabilizer bars,tires etc the list will go on,also I'd like to do a built short block in future aswell,I did all the work so far on my car and it has been great,cars are built not bought,u can't really appreciate the full fun of a car if you didn't build it yourself,just my opinion,thanks guys on the forum for any help and thanks to the guys that run the forum for letting me post on here,I'll update as more parts show up TBatt likes this.

05-12-2016, 10:47 PM	#164 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Glad to hear everything is running good ....keep in mind when you go to the 85mm pulley you will need to go with the upgraded fuel system ....mine should be here in a few days and can't wait to get it tuned up right Last edited by Jinxx; 05-14-2016 at 07:21 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 07:04 AM
GTM Stage 1.5 Supercharged Roadster Build	JVerge5363	Forced Induction	26	06-13-2014 12:02 PM
FRYZIA23 GTM stage 1.5 S/C build	fryzia23	Forced Induction	91	01-16-2014 12:20 AM
New GTM stage 2 TT build	Billy02987	Forced Induction	212	06-04-2011 04:56 PM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 11:34 AM

04-24-2016, 04:25 PM	#152 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	You will lose traction if you are aggressive with the clutch ......when I was running everytime I shifted gears it would break traction ...back end would kick out a little each gear ....I really like the difference between the 92 and 85 pulley tho ....power comes on much sooner

04-26-2016, 06:43 PM	#154 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	You will need the fuel return system with that pulley But .... That pulley is sooooo much better lol

04-28-2016, 04:37 PM	#156 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Why go through the retuning ..... Slap it on there pay for one tune and be done that's the main reason I haven't done the custom tune yet ... Wanna make sure I have what I needed ...pulley ... And fuel system to support it .... The tune once and all fun after that .......till it blows lol

04-30-2016, 10:39 PM	#158 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Got an oil leak on oil cooler line from gamma,waiting on gamma for replacement line

05-01-2016, 12:15 AM	#159 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	I got my oil cooler from z1 ....hoses were serviceable and I had to cut them down shorter ... Still have enough hose to replace the lines if needed

05-01-2016, 08:33 PM	#160 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	What did you decide on for a fuel return system?

05-01-2016, 10:13 PM	#161 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	I'm gonna go with the cjm kit .... Once I break down and order it ..won't be much longer ......then I'll set up a custom tune .....

05-12-2016, 09:34 PM	#163 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	IMG_20160501_140541.jpg