Stage 2 sc build has begun

tiller · 12-13-2015, 05:10 PM

Quote:

Originally Posted by Jinxx

One thing I did noticed when installing the motor mount on the passenger side ...the bolts through the new mount that go through the the red polyurethane bushings have about 1/4 inch extra thread once tight and it slightly touched transmission housing causing a tapping/spark knocking sound at lower rpms. Took me a whole week to find it ...I used a dremel to grind down a few thread of the bolt .....something I wished I did before installing.

Interesting,I just finished installing the pass side mount,the base of it touched rack bolt so I'd had to mod abit but I'll take a look at the bolts that you are talking about later,here's a pic I just took. IMG_20151213_164209.jpg

tiller · 12-26-2015, 12:20 AM

IMG_0099.jpg
Merry christmas, the stage 2sc build will be wide open after the holidays,figured I had a few minutes on Xmas day in 2degree weather to get out for a ride

tiller · 12-31-2015, 05:12 PM

Just installed my sc unit today,everything went smooth,here's a pic
IMG_20151231_161356.jpg

Jinxx · 12-31-2015, 11:23 PM

Looks like you about 10 hours away from starting her up getting close now
Do you have a tune ready to upload for it ?

tiller · 01-01-2016, 01:45 AM

Quote:

Originally Posted by Jinxx

Looks like you about 10 hours away from starting her up getting close now
Do you have a tune ready to upload for it ?

No its winter where I am so iam waiting,I have time on my side,hoping gamma gets the ECU tek figured out,what are u running?

Jinxx · 01-01-2016, 10:08 AM

I have uprev ... It was included in the kit ... My can tune seems ok to start with and work out any bugs before a custom tune ...haven't really had any issues tho... I sent Jon at z1 the data logs for him to look over ... He was gonna adjust the throttle by wire lag issue and change the fan tables to turn them on a little sooner ....and look into maybe leaning it up some.

tiller · 01-01-2016, 10:35 AM

Quote:

Originally Posted by Jinxx

I have uprev ... It was included in the kit ... My can tune seems ok to start with and work out any bugs before a custom tune ...haven't really had any issues tho... I sent Jon at z1 the data logs for him to look over ... He was gonna adjust the throttle by wire lag issue and change the fan tables to turn them on a little sooner ....and look into maybe leaning it up some.

OK,so gammas not doing any of the ecutek for you?hows the power spread feel when you drive?I take it you can't drive the car with vdc on?

Jinxx · 01-01-2016, 10:59 AM

I didn't deal with gamma at all ....I went through z1 motorsports... I cN drive with vdc on with no issues just like stock if it breaks traction it kick throttle down .....pulls very hard compared to stock and really seems like a stock car with a lot more power. I just got my a-pillar yesterday and gonna order the zt-2 multi gauge after holidays.

tiller · 01-01-2016, 06:25 PM

Quote:

Originally Posted by Jinxx

I didn't deal with gamma at all ....I went through z1 motorsports... I cN drive with vdc on with no issues just like stock if it breaks traction it kick throttle down .....pulls very hard compared to stock and really seems like a stock car with a lot more power. I just got my a-pillar yesterday and gonna order the zt-2 multi gauge after holidays.

Cool,multi gauge will be nice addition,did you have to mod any heat sheilds on passenger side header to fit the sc air filter so its not close to anything hot?

Jinxx · 01-01-2016, 09:11 PM

No all heat shields fit back in stock location with no issue

tiller · 01-02-2016, 08:48 AM

Quote:

Originally Posted by Jinxx

No all heat shields fit back in stock location with no issue

Do yuo remember if your filter was really close to block?mine sits real close,I've kept it all loose so I can spin intake tube but still seems close

Jinxx · 01-02-2016, 09:12 AM

You have to take off a piece and grind/cut it down ...and even after it is really close .....I actually thought about looking for a different size air filter to replace it with. The piece is a little black cover on the transmission and even after cutting it down it's still a tight fit

tiller · 01-02-2016, 09:25 AM

Quote:

Originally Posted by Jinxx

You have to take off a piece and grind/cut it down ...and even after it is really close .....I actually thought about looking for a different size air filter to replace it with. The piece is a little black cover on the transmission and even after cutting it down it's still a tight fit

Ya I trimmed that little access cover on trans but still close,I was thinking the same thing about smaller filter,gona fool with it today and see how it's goes.

Jinxx · 01-02-2016, 10:59 AM

I did use the green filter that came with the the kit ...and yes it's very close ..even pushes on the filter a little. Not sure if there is a smaller filter to chose from that will flow what the charger needs tho.

tiller · 01-02-2016, 04:25 PM

Quote:

Originally Posted by Jinxx

I did use the green filter that came with the the kit ...and yes it's very close ..even pushes on the filter a little. Not sure if there is a smaller filter to chose from that will flow what the charger needs tho.

Got filter in place,definitely should have been routed further back or over towards passenger wheel cuz its tight,got alternator in to,trying to go slow cuz winter is at least another 3months

12-31-2015, 05:12 PM	#18 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Just installed my sc unit today,everything went smooth,here's a pic IMG_20151231_161356.jpg Memphis370Z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 07:04 AM
GTM Stage 1.5 Supercharged Roadster Build	JVerge5363	Forced Induction	26	06-13-2014 12:02 PM
FRYZIA23 GTM stage 1.5 S/C build	fryzia23	Forced Induction	91	01-16-2014 12:20 AM
New GTM stage 2 TT build	Billy02987	Forced Induction	212	06-04-2011 04:56 PM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 11:34 AM

12-26-2015, 12:20 AM	#17 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	IMG_0099.jpg Merry christmas, the stage 2sc build will be wide open after the holidays,figured I had a few minutes on Xmas day in 2degree weather to get out for a ride

12-31-2015, 11:23 PM	#19 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	Looks like you about 10 hours away from starting her up getting close now Do you have a tune ready to upload for it ?

01-01-2016, 10:08 AM	#21 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	I have uprev ... It was included in the kit ... My can tune seems ok to start with and work out any bugs before a custom tune ...haven't really had any issues tho... I sent Jon at z1 the data logs for him to look over ... He was gonna adjust the throttle by wire lag issue and change the fan tables to turn them on a little sooner ....and look into maybe leaning it up some.

01-01-2016, 10:59 AM	#23 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	I didn't deal with gamma at all ....I went through z1 motorsports... I cN drive with vdc on with no issues just like stock if it breaks traction it kick throttle down .....pulls very hard compared to stock and really seems like a stock car with a lot more power. I just got my a-pillar yesterday and gonna order the zt-2 multi gauge after holidays.

01-01-2016, 09:11 PM	#25 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	No all heat shields fit back in stock location with no issue

01-02-2016, 09:12 AM	#27 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	You have to take off a piece and grind/cut it down ...and even after it is really close .....I actually thought about looking for a different size air filter to replace it with. The piece is a little black cover on the transmission and even after cutting it down it's still a tight fit

01-02-2016, 10:59 AM	#29 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	I did use the green filter that came with the the kit ...and yes it's very close ..even pushes on the filter a little. Not sure if there is a smaller filter to chose from that will flow what the charger needs tho.