Stage 2 sc build has begun

jwick · 02-19-2016, 09:49 PM

Quote:

Originally Posted by tiller

Jinxx did you reuse your injector clips for the fuel rail with your Bosch ev's?

I want to say I did but it's been two years

YzGyz · 02-19-2016, 09:59 PM

I did.

YzGyz

tiller · 02-19-2016, 10:06 PM

OK thanks guys,seems to keep them more stable but I have hard connectors not pigtails so I was curious before I dropped rail back in

Jinxx · 02-20-2016, 08:57 AM

No I didn't reuse mine .... Everything seem tight and per my install instructions it said they wasn't needed.....I did try to put them back but they kept popping off so I gave up with them

tiller · 02-20-2016, 09:26 AM

Quote:

Originally Posted by Jinxx

No I didn't reuse mine .... Everything seem tight and per my install instructions it said they wasn't needed.....I did try to put them back but they kept popping off so I gave up with them

OK,I got them back on just didn't line them up with the lock tab so it allows me to rotate injector,I'll install rail later tonight and see how it turns out,I found without the tab I could push injector to far into rail housing.

tiller · 02-23-2016, 08:18 PM

Injectors an cj fuel pressure gauge are in,and gtr plugs
[ATTACH]IMG_20160223_192809.jpg[/ATTACH]

Jinxx · 02-24-2016, 09:03 AM

Nice ....I didn't install a fuel pressure gauge....I prolly have a few in my garage somewhere lol

tiller · 02-25-2016, 08:12 PM

Hey jinxx did you install 2.5' clamps on your intake joint that connects intercooler piping to the intake piping at rad shroud?

tiller · 02-25-2016, 08:16 PM

Here's a few more pics,will be installing thermostatic setrab oil cooler tommorow night

IMG_20160225_183824.jpg

IMG_20160225_183835.jpg

Jinxx · 02-25-2016, 10:34 PM

Looking good ... I would be sure to break apart the BPV and lube it very well. Mine got stuck with 2k miles on it and I had to take bumper off to get to it ..... Not sure if it was a bad idea o not but I used motor oil to lube it ... 10/30 synthetic and it's been good since.

tiller · 02-26-2016, 10:58 PM

Quote:

Originally Posted by Jinxx

Looking good ... I would be sure to break apart the BPV and lube it very well. Mine got stuck with 2k miles on it and I had to take bumper off to get to it ..... Not sure if it was a bad idea o not but I used motor oil to lube it ... 10/30 synthetic and it's been good since.

Hydraulic oil or sewing machine oil works well to lube the bpv

Jinxx · 02-27-2016, 05:03 AM

Yea didn't have any at the time and read where some had used motor oil and claimed it to last a long time ....knock on wood .... I have a zclub meet today soooo it will prolly stick on me lol

Chuck33079 · 02-27-2016, 09:31 AM

Quote:

Originally Posted by tiller

Hydraulic oil or sewing machine oil works well to lube the bpv

Multi Spray BOV Lubricant 50ml

I use this on my BOVs every time I have the bumper off to clean the air filters. Amazon has it for about $15.

tiller · 02-27-2016, 10:18 PM

Took the bov apart today and used a little hydraulic oil on it,worked great

Jinxx · 02-27-2016, 11:42 PM

I'm testing mine to see how long it will last ... 3 weeks so far

02-19-2016, 09:59 PM	#92 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I did. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 07:04 AM
GTM Stage 1.5 Supercharged Roadster Build	JVerge5363	Forced Induction	26	06-13-2014 12:02 PM
FRYZIA23 GTM stage 1.5 S/C build	fryzia23	Forced Induction	91	01-16-2014 12:20 AM
New GTM stage 2 TT build	Billy02987	Forced Induction	212	06-04-2011 04:56 PM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 11:34 AM

02-19-2016, 10:06 PM	#93 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	OK thanks guys,seems to keep them more stable but I have hard connectors not pigtails so I was curious before I dropped rail back in

02-20-2016, 08:57 AM	#94 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	No I didn't reuse mine .... Everything seem tight and per my install instructions it said they wasn't needed.....I did try to put them back but they kept popping off so I gave up with them

02-24-2016, 09:03 AM	#97 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Nice ....I didn't install a fuel pressure gauge....I prolly have a few in my garage somewhere lol

02-25-2016, 08:12 PM	#98 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Hey jinxx did you install 2.5' clamps on your intake joint that connects intercooler piping to the intake piping at rad shroud?

02-25-2016, 08:16 PM	#99 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Here's a few more pics,will be installing thermostatic setrab oil cooler tommorow night IMG_20160225_183824.jpg IMG_20160225_183835.jpg

02-25-2016, 10:34 PM	#100 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Looking good ... I would be sure to break apart the BPV and lube it very well. Mine got stuck with 2k miles on it and I had to take bumper off to get to it ..... Not sure if it was a bad idea o not but I used motor oil to lube it ... 10/30 synthetic and it's been good since.

02-27-2016, 05:03 AM	#102 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Yea didn't have any at the time and read where some had used motor oil and claimed it to last a long time ....knock on wood .... I have a zclub meet today soooo it will prolly stick on me lol

02-27-2016, 10:18 PM	#104 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Took the bov apart today and used a little hydraulic oil on it,worked great

02-27-2016, 11:42 PM	#105 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	I'm testing mine to see how long it will last ... 3 weeks so far