F.I. twin turbo install ?

fastguy9r · 11-30-2015, 10:10 PM

Has anyone installed a F.I. twin turbo kit without removing the engine from the car ?

Infidel · 12-01-2015, 06:20 AM

Quote:

Originally Posted by fastguy9r

Has anyone installed a F.I. twin turbo kit without removing the engine from the car ?

Do you have burger king hands?

jwick · 12-01-2015, 09:28 AM

Quote:

Originally Posted by fastguy9r

Has anyone installed a F.I. twin turbo kit without removing the engine from the car ?

There is a guy that will be starting that effort in the next week or so

NeverBoneStck · 12-01-2015, 12:06 PM

Quote:

Originally Posted by jwick

There is a guy that will be starting that effort in the next week or so

jwick · 12-01-2015, 12:37 PM

Quote:

Originally Posted by NeverBoneStck

Best of luck! Wish you were closer.

TerribleONE · 12-01-2015, 09:34 AM

I am sure it can be done however you are much better off pulling the motor.

Are you trying to DIY?

jwick · 12-01-2015, 09:55 AM

Quote:

Originally Posted by TerribleONE

I am sure it can be done however you are much better off pulling the motor.

Are you trying to DIY?

I think all the mechanical portions of the install are extremely doable without dropping the motor. The parts that I'd be worried about are WGs/vacuum lines and both cooling supplies to the turbos.

fastguy9r · 12-01-2015, 05:56 PM

Quote:

Originally Posted by TerribleONE

I am sure it can be done however you are much better off pulling the motor.

Are you trying to DIY?

Yes I am going to install it myself ! I have been a certified mechanic for 22 years now ! I would pull the motor and trans but I don't know if I would be able to tie up one of the lifts at work for that long . I know many people have installed the GTM/Gamma turbo kit without pulling the motor ! I am wondering if anyone has installed the Fast Intentions turbo kit without pulling the motor . I talked with Kevin at F.I. yesterday and he did not think anyone has done so . Let me know ! Thanks, Ken

Spooler · 12-01-2015, 11:06 AM

This idea brings back memories of trying to deal with Turbo's on a 1990-96 300zxTT car. It was so much easier to just yank the motor and tranny.

GrooveStyle · 12-01-2015, 11:34 AM

I'm gonna attempt it here in the next week or so. The Gamma V3 kit touts that you don't need to pull the engine, so gonna put that statement to the test.

Jayhovah · 12-01-2015, 12:23 PM

Quote:

Originally Posted by GrooveStyle

I'm gonna attempt it here in the next week or so. The Gamma V3 kit touts that you don't need to pull the engine, so gonna put that statement to the test.

You got a PM =)

iBenJAMM1N · 12-01-2015, 01:38 PM

I have the AAM kit but I am gonna try to DIY without pulling the motor.

KN21283 · 12-01-2015, 03:28 PM

Quote:

Originally Posted by iBenJAMM1N

I have the AAM kit but I am gonna try to DIY without pulling the motor.

Hope it goes well and good luck!

I had to change a heater hose above the driver side turbo and it was a PITA.

iBenJAMM1N · 12-01-2015, 05:09 PM

Quote:

Originally Posted by KN21283

Hope it goes well and good luck!

I had to change a heater hose above the driver side turbo and it was a PITA.

Did you put the kit together yourself?

KN21283 · 12-01-2015, 07:43 PM

Quote:

Originally Posted by iBenJAMM1N

Did you put the kit together yourself?

No, I had it installed by aam.

11-30-2015, 10:10 PM	#1 (permalink)
fastguy9r Track Member Join Date: Mar 2012 Location: Medina Ohio Posts: 915 Drives: 2012 370z PW TT Rep Power: 15	F.I. twin turbo install ? Has anyone installed a F.I. twin turbo kit without removing the engine from the car ?

12-01-2015, 09:34 AM	#6 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5851	I am sure it can be done however you are much better off pulling the motor. Are you trying to DIY? __________________ 638WHP 541WTQ @ 13.5PSI Build thread

12-01-2015, 11:34 AM	#10 (permalink)
GrooveStyle Base Member Join Date: Sep 2011 Location: Waterloo, Iowa Posts: 230 Drives: '12 370z GM 6MT Rep Power: 14	I'm gonna attempt it here in the next week or so. The Gamma V3 kit touts that you don't need to pull the engine, so gonna put that statement to the test. wideglideleon likes this.

12-01-2015, 01:38 PM	#12 (permalink)
iBenJAMM1N Base Member Join Date: Sep 2014 Location: Clarksville, TN Posts: 140 Drives: 15 Nismo 370z Rep Power: 11	I have the AAM kit but I am gonna try to DIY without pulling the motor. __________________ 2015 NISMO http://www.the370z.com/members-370z-...smo-build.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY GTM Twin Turbo Stage 2 Install!!	modme	Forced Induction	59	07-09-2017 10:26 AM
FSP: GTM and GREDDY TWIN TURBO + INSTALL PACKAGE DEALS!!	Chris@FsP	Drivetrain/Engine	6	11-11-2010 12:32 PM
GTM TWIN TURBO install at HP Logic	westpak	Forced Induction	124	11-29-2009 08:01 PM

12-01-2015, 11:06 AM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,975 Drives: 2013 Nismo 370z Rep Power: 2684392	This idea brings back memories of trying to deal with Turbo's on a 1990-96 300zxTT car. It was so much easier to just yank the motor and tranny.