My kit has arrived! WOOOOOP!

Jayhovah · 11-18-2015, 08:03 PM

First:
Please keep this thread under control, I am just excited about my parts and just want to geek out about the whole thing. Keep the bash fest to a minimum... Ppppppllease? =)

Now - My gamma V3 kit showed up!!!!! I was on the GTM group buy cluster and Gamma honored the deposit i flushed into the GTM toilet.

Had the kit shipped to my brother-in-law in Texas as he has more mechanical skills and also has a lift in his garage. Driving over there exactly one month from today to start the install! I am beyond pumped! BOOOOOOOOOOOOOST!

Here are some pics he sent me as he started unboxing. He's going to inventory all the parts tomorrow.

Infiniti370z · 11-18-2015, 11:38 PM

Congratulations Jayhovah! I got my GM V3 TT kit dilivered as well, I wish you the best on your journey to BOOST!!!

GrooveStyle · 11-19-2015, 12:06 AM

Congrats! Glad you got it! My kit is supposed to be in the mail as of yesterday. Pretty excited. What are you guys tuning on? I went the ECUtek route. It'll be really nice to have a couple of us to bounce build ideas off of...

Speaking of which, due to the tight clearances, I'm tempted to get the Z1 Urethane motor mounts at some point. Reduce risk of putting additional pressure on the turbos/manifolds due to movement of the motor under load. Thoughts? Not usually top on the list of turbo build upgrades, but seems like it might be important.

YzGyz · 11-19-2015, 12:23 AM

Omg!! Probably my first and only post since it's from that company. But, I'm really excited with what this thing can do. I mean r&d and blah blah for years now. Hope it's a killer kit that's easy to install and great outcome. Post every little detail good and bad. Lots of people are curious and following. I know I am.

YzGyz

Jayhovah · 11-19-2015, 05:52 AM

Quote:

Originally Posted by GrooveStyle

Congrats! Glad you got it! My kit is supposed to be in the mail as of yesterday. Pretty excited. What are you guys tuning on? I went the ECUtek route. It'll be really nice to have a couple of us to bounce build ideas off of...

I got the turn-key kit so I'm unfortunately stuck with Uprev for now. Since I am driving to TX to do the install over the holiday, I'll only have about 11 days to get the project done start to finish... to start out I just want to get it installed the way it was intended.

Once I get the kit up and running I'll consider a switch though. Seems like folks are getting a lot out of the ecutek solution. Perhaps I'll get one of those fancy e-tunes, should get to see how that works out for other TT people by the time I am ready to switch. As of now there aren't any ecutek tuners in my area. There are a couple in Miami - one of which seems to be known in the GTR community, but not necessarily with the Z.

I'm also excited to see a few of us getting this kit! Glad to have a little "community" for support in addition to all the smart FI guys on this board.

tiller · 11-19-2015, 09:22 PM

Congrats,good to see you got your kit

Chuck33079 · 11-19-2015, 09:41 PM

There's an ecutek tuner in Houston. Not sure where in tx you're doing the work, but JTran will take care of you if you want to make the switch.

Jayhovah · 11-19-2015, 11:22 PM

Quote:

Originally Posted by Chuck33079

There's an ecutek tuner in Houston. Not sure where in tx you're doing the work, but JTran will take care of you if you want to make the switch.

Thats......not a bad idea! The only worry is that I'll only have 11 days start to finish.. if we finish in time and they can somehow fit me in, I may very well do that!

1cleanZ · 11-20-2015, 07:49 AM

Happy to see it worked out for you and they honored your deposit.

tonythetiger · 11-21-2015, 10:34 AM

how much was the group by for??

harbin9er · 11-21-2015, 09:33 PM

congrats! I am waiting on the G37 version of the same kit

Chuck33079 · 11-21-2015, 09:46 PM

Quote:

Originally Posted by Jayhovah

Thats......not a bad idea! The only worry is that I'll only have 11 days start to finish.. if we finish in time and they can somehow fit me in, I may very well do that!

Where in TX are you putting this together? There's more than a few of us who would come up to help and drink beer if it's local.

Jayhovah · 11-22-2015, 05:54 PM

Quote:

Originally Posted by Chuck33079

Where in TX are you putting this together? There's more than a few of us who would come up to help and drink beer if it's local.

Houston! I've got a couple of folks already on board to help, but if we begin to struggle I would gladly accept the offer! Even if things go smoothly, it would be awesome to meet any of you guys for a beer.

tonyHTX · 11-22-2015, 08:07 PM

Quote:

Originally Posted by Jayhovah

Houston! I've got a couple of folks already on board to help, but if we begin to struggle I would gladly accept the offer! Even if things go smoothly, it would be awesome to meet any of you guys for a beer.

I like beer, count me in!

YzGyz · 11-22-2015, 09:13 PM

Car n beer.. as ounds good. Could end up being a big Z party with boost. !!

YzGyz

11-18-2015, 11:38 PM	#2 (permalink)
Infiniti370z Track Member Join Date: Sep 2010 Location: Coconut Creek, FL Posts: 604 Drives: Lamborghinis all day Rep Power: 16	Congratulations Jayhovah! I got my GM V3 TT kit dilivered as well, I wish you the best on your journey to BOOST!!! Zbrah likes this. __________________ //RAYS ENGINEERING//Z1 MOTORSPORTS//NISMO//RADI-CAL BBK//SPARCO//3M//ESCORT//BLENDMOUNT//BOSE//AAM//GTR//THE RETROFIT SOURCE//MILLENNIA 2014 Nismo BLK//2004 Sentra SE-R Spec-v//2013 Prius 4//Sold 2010 370z GM base 6MT

11-19-2015, 12:23 AM	#4 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Omg!! Probably my first and only post since it's from that company. But, I'm really excited with what this thing can do. I mean r&d and blah blah for years now. Hope it's a killer kit that's easy to install and great outcome. Post every little detail good and bad. Lots of people are curious and following. I know I am. YzGyz GrooveStyle and binary0x01 like this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

11-19-2015, 09:41 PM	#7 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	There's an ecutek tuner in Houston. Not sure where in tx you're doing the work, but JTran will take care of you if you want to make the switch. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

11-20-2015, 07:49 AM	#9 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 20	Happy to see it worked out for you and they honored your deposit. __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

11-21-2015, 10:34 AM	#10 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	how much was the group by for?? __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

11-19-2015, 12:06 AM	#3 (permalink)
GrooveStyle Base Member Join Date: Sep 2011 Location: Waterloo, Iowa Posts: 230 Drives: '12 370z GM 6MT Rep Power: 14	Congrats! Glad you got it! My kit is supposed to be in the mail as of yesterday. Pretty excited. What are you guys tuning on? I went the ECUtek route. It'll be really nice to have a couple of us to bounce build ideas off of... Speaking of which, due to the tight clearances, I'm tempted to get the Z1 Urethane motor mounts at some point. Reduce risk of putting additional pressure on the turbos/manifolds due to movement of the motor under load. Thoughts? Not usually top on the list of turbo build upgrades, but seems like it might be important.

11-19-2015, 09:22 PM	#6 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Congrats,good to see you got your kit

11-21-2015, 09:33 PM	#11 (permalink)
harbin9er Base Member Join Date: Apr 2013 Location: USA Posts: 6 Drives: 2008 G37S Rep Power: 12	congrats! I am waiting on the G37 version of the same kit

11-22-2015, 09:13 PM	#15 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Car n beer.. as ounds good. Could end up being a big Z party with boost. !! YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new Z arrived.	NS370Z	New 370Z Owner	13	06-23-2012 06:54 PM
It Has Arrived...	Alstann	New 370Z Owner	6	01-14-2012 09:46 PM
My Z has arrived!	Z_ealot	New 370Z Owner	26	08-17-2011 08:43 PM
She arrived!	Gixxer2k4	Introduction	13	12-23-2010 01:51 AM
My Z Has Arrived!	370er	Australia/New Zealand	14	10-01-2009 10:33 PM