Black smoke out back, engine splutter

YzGyz · 11-10-2015, 01:37 PM

Yeah, I'm not a fan of worm screws myself. I just bought 2 43mm t bolts. I will be replacing the Olds ones when I get the new ones in.

YzGyz

jwick · 11-10-2015, 02:56 PM

To be honest I'm shocked it leaked on that bottom connection. That one is a bastard to get on.

YzGyz · 11-10-2015, 03:40 PM

Quote:

Originally Posted by jwick

To be honest I'm shocked it leaked on that bottom connection. That one is a bastard to get on.

I just checked it again, It still has a small leak. like wtf!!! The worm screw clamp is on there good!. I'll have to drain the thing, pull the tube and check it when I replace that clamp. For now, I'll just top her off as I need. I don't have time to do mess with it and it's minimal. Like wth..

YzGyz

jwick · 11-10-2015, 03:45 PM

Check the gasket at the thermostat. If it leaked there it would likely run down the hose and make it look like its leaking from the bottom.

YzGyz · 11-10-2015, 06:07 PM

I checked the thing at the top a few times. It's dry. I just ran her for 20 minutes in the driveway again because it pissed me off. This time, it was dry. WTF!! Anyhoo, it wasn't dripping much before so I'll continue to watch it till I drain, inspect and reinstall that hose.

God I want me a darn car lift.. I hate having to drive on wood, jack one end then the other. Then re-jack the from the other end and once again the last end to get her all the way up.

YzGyz

11-10-2015, 01:37 PM	#31 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Yeah, I'm not a fan of worm screws myself. I just bought 2 43mm t bolts. I will be replacing the Olds ones when I get the new ones in. YzGyz jwick likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

11-10-2015, 02:56 PM	#32 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	To be honest I'm shocked it leaked on that bottom connection. That one is a bastard to get on. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

11-10-2015, 03:45 PM	#34 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Check the gasket at the thermostat. If it leaked there it would likely run down the hose and make it look like its leaking from the bottom. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

11-10-2015, 06:07 PM	#35 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I checked the thing at the top a few times. It's dry. I just ran her for 20 minutes in the driveway again because it pissed me off. This time, it was dry. WTF!! Anyhoo, it wasn't dripping much before so I'll continue to watch it till I drain, inspect and reinstall that hose. God I want me a darn car lift.. I hate having to drive on wood, jack one end then the other. Then re-jack the from the other end and once again the last end to get her all the way up. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clunking noise from back of the engine	6mtg37s	Engine & Drivetrain	0	11-13-2012 03:38 PM
Back in black	boxienuts	New 370Z Owner	13	04-13-2012 10:08 AM
headlight smoke out	cmefly440	Exterior & Interior	0	05-22-2010 11:04 PM
Do You Smoke in Your Z?	vipor	Nissan 370Z General Discussions	96	03-31-2010 01:08 PM