BBR shop car build

BBRSpeedWorks · 10-28-2015, 11:48 PM

Poly everything and solid diff and subframe. 12k springs in the back and also a second set for the track also no sway bar in the front. I run BC coil cus I get them for 799 and I can get any spring I want...I would have went solid everywhere in the back but it was over a grand so I'll do that later.

Streetz · 10-29-2015, 08:56 AM

Just out of curiosity what exactly does removing the front sway bar do? I have heard this for years, but never full understood it much. Getting the Z chassis to hook up is a full time job. Ive been trying everything everyone talks about and nothing works. The compression camber on the suspension design is too much for high horsepower builds.

I have solid subframe and diff mounts. I only noticed a difference on handling, But over all nothing on traction.

My next try will be running 28" TALL tires.

BBRSpeedWorks · 10-29-2015, 11:16 AM

Quote:

Originally Posted by Streetz

Just out of curiosity what exactly does removing the front sway bar do? I have heard this for years, but never full understood it much. Getting the Z chassis to hook up is a full time job. Ive been trying everything everyone talks about and nothing works. The compression camber on the suspension design is too much for high horsepower builds.

I have solid subframe and diff mounts. I only noticed a difference on handling, But over all nothing on traction.

My next try will be running 28" TALL tires.

Talking it off helps with weight transfer to sit on the the tires. The solid mounts are good but u need to do all the mounts in the back I. E. All the mounts on the rear hubs all that.. what tires are you running? You do not want a z to squat. Squat equals wheel hop.. this is what I do, run the stiffs spring u can get in the back, poly everything, get it aliNed but strap it down as tight as u can get it to see what the car is going to do with the lil bit of swat it has left..make ur adjustments there so ur at 0 wit the lil bit of swat it has left..run ur tire pressure at 15 psi. Make adjustments from there. But this is what I did someone else may go a different route....
For the daily I'll be running nt05r 325
For the track Mt x275 15x1 275 tire

BBRSpeedWorks · 10-30-2015, 12:00 AM

Engines back from the machine shop. Start assembly tomorrow.

BBRSpeedWorks · 10-30-2015, 06:59 PM

Sooooooo I started assembly and was checking oil clearance when I open my nice new bearings from my local nissan to find out they gave me .25 over bearings...
So I'm a lil bummed out and have to see if I can get some asap...

BBRSpeedWorks · 11-06-2015, 01:29 PM

So i got the new main bearings in and pulled a late night, till about 3am but it was well worth it the Short block is complete. Everything lubed and torqued rings gapped and clocked. Now on to heads and cams today.

Masterbeatty · 11-07-2015, 05:31 PM

After a 2nd look. It looks like you might have the Pistons upside down...

( Click to show/hide )

BBRSpeedWorks · 11-07-2015, 09:09 PM

No there all in there right none of them hit the oil squirters . The cp piston valve reliefs are the same on both sides they have a cut out on the bottom of the piston for the oil squirters.

Elmo370z · 11-30-2015, 01:38 AM

Quote:

Originally Posted by BBRSpeedWorks

No there all in there right none of them hit the oil squirters . The cp piston valve reliefs are the same on both sides they have a cut out on the bottom of the piston for the oil squirters.

LSM Systems Engineering | Custom Billet Blocks

Here is idea. Then you could run with the GTR's and UGR Lambo in the 1/2 mile run.

Elmo370z · 11-30-2015, 01:39 AM

And for that guy bullet who has that gnarley stroker boosted Z

BBRSpeedWorks · 04-01-2016, 02:24 PM

Im back from the dead

gbrettin · 04-01-2016, 03:08 PM

Anything new?

BBRSpeedWorks · 04-01-2016, 04:06 PM

Ya im going to do an update tonight...

bullitt5897 · 04-01-2016, 04:37 PM

The update she is still slow lol... Going to share those new meat flaps with the mere mortals? Hehe

NissanTracker · 02-21-2023, 04:38 PM

Quote:

Originally Posted by BBRSpeedWorks

Ya im going to do an update tonight...

Was going through this thread and I started to climax, but then flop. What ever happened to this build? 6/7 years later.

10-28-2015, 11:48 PM	#91 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Poly everything and solid diff and subframe. 12k springs in the back and also a second set for the track also no sway bar in the front. I run BC coil cus I get them for 799 and I can get any spring I want...I would have went solid everywhere in the back but it was over a grand so I'll do that later. __________________ God'Z Gift.

10-30-2015, 12:00 AM	#94 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Engines back from the machine shop. Start assembly tomorrow. phunk, gbrettin, Rusty and 4 others like this. __________________ God'Z Gift.

10-30-2015, 06:59 PM	#95 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Sooooooo I started assembly and was checking oil clearance when I open my nice new bearings from my local nissan to find out they gave me .25 over bearings... So I'm a lil bummed out and have to see if I can get some asap... __________________ God'Z Gift.

11-06-2015, 01:29 PM	#96 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	So i got the new main bearings in and pulled a late night, till about 3am but it was well worth it the Short block is complete. Everything lubed and torqued rings gapped and clocked. Now on to heads and cams today. phunk, gbrettin, hjo1078 and 7 others like this. __________________ God'Z Gift.

11-07-2015, 05:31 PM	#97 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	After a 2nd look. It looks like you might have the Pistons upside down... ( Click to show/hide ) Im kidding, keep up the good work! __________________ 2011 MB 6MT Masterbeatty journal

10-29-2015, 08:56 AM	#92 (permalink)
Streetz Base Member Join Date: Aug 2015 Location: Chicago Posts: 59 Drives: 2011 370zTT 818whp Rep Power: 10	Just out of curiosity what exactly does removing the front sway bar do? I have heard this for years, but never full understood it much. Getting the Z chassis to hook up is a full time job. Ive been trying everything everyone talks about and nothing works. The compression camber on the suspension design is too much for high horsepower builds. I have solid subframe and diff mounts. I only noticed a difference on handling, But over all nothing on traction. My next try will be running 28" TALL tires.

11-07-2015, 09:09 PM	#98 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	No there all in there right none of them hit the oil squirters . The cp piston valve reliefs are the same on both sides they have a cut out on the bottom of the piston for the oil squirters. __________________ God'Z Gift.

11-30-2015, 01:39 AM	#100 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	And for that guy bullet who has that gnarley stroker boosted Z

04-01-2016, 02:24 PM	#101 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Im back from the dead __________________ God'Z Gift.

04-01-2016, 03:08 PM	#102 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,281 Drives: Tricycle Rep Power: 589151	Anything new?

04-01-2016, 04:06 PM	#103 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Ya im going to do an update tonight... jaytirbhaw, gbrettin, whiteZ34 and 1 others like this. __________________ God'Z Gift.

04-01-2016, 04:37 PM	#104 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The update she is still slow lol... Going to share those new meat flaps with the mere mortals? Hehe whiteZ34, BBRSpeedWorks and NissanTracker like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New build: GTM TT Stg II • '08 Infiniti G37 5-spd auto • The Shop CT	SharpByCoop	Forced Induction	153	12-20-2012 09:54 AM
Anyone know of a good mod/body shop/restoration shop in Maryland?	dmhenderson	Mid-Atlantic Region	28	09-29-2012 01:31 PM
Any Good Body Shop/Collision Shop in NY/NNJ area?	galanhk	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	12-28-2011 12:33 PM
shop that can build circuit for evo r foglight	fxroar	Southern California Region	18	10-20-2011 01:58 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM