Stillen Air to Air setup

JWillis72 · 02-25-2016, 03:20 PM

Quote:

Originally Posted by EVOHUNTER

i found a V2 here in Edmonton, 700$ but the volute tip is kinda crushed. (easy to fix)

Guy got into a front end accident and the blower took a little bump.

I can weld up the volute and send it out for a rebuild.

I told the guy i want to see if it will work with my bracket before i buy it.

Hes stoping by tonight, we will see!

Please take pictures for us!

EVOHUNTER · 02-25-2016, 06:35 PM

Quote:

Originally Posted by JWillis72

Please take pictures for us!

Defiantly will, ive gotta contact sasha for a oil pan spacer and scavenger pump aswell.

Should be all I need to get it going.

JWillis72 · 02-25-2016, 06:39 PM

Crap, you have me thinking about continuing my madness. I must resist, I don't think my liver can take it!!!!

Sent from my iPhone using Tapatalk

TopgunZ · 02-25-2016, 08:17 PM

Quote:

Originally Posted by EVOHUNTER

Defiantly will, ive gotta contact sasha for a oil pan spacer and scavenger pump aswell.

Should be all I need to get it going.

You don't need a scavenge pump and you can get a jwt spacer for $99.

You only need to scavenge oil when it is below the pan or parallel. Gravity is your pump when it's above it.

Pauly Z · 02-26-2016, 09:46 AM

Well vortech says they are gaining to send the supercharger to qc to see if the cases are good to rebuild. If not I have to buy a new one. Ugh. So if that's the case I will see about a v2. It should have all the same bolt locations for mounting correct?

Sent from my SM-N920V using Tapatalk

Pauly Z · 02-26-2016, 09:48 AM

Quote:

Originally Posted by TopgunZ

You don't need a scavenge pump and you can get a jwt spacer for $99.

You only need to scavenge oil when it is below the pan or parallel. Gravity is your pump when it's above it.

So the oil pressure sending unit location should be ok with out a scavenge pump?

Sent from my SM-N920V using Tapatalk

JWillis72 · 02-26-2016, 09:55 AM

Evo, did it fit?

EVOHUNTER · 02-26-2016, 10:37 AM

The guy flaked out on me, he had to take his kids to hockey or something lol.

I wont know tell next week now, im going down to palm springs tomorrow morning for a golf tournament, for a couple of days

Z&I · 02-26-2016, 11:00 AM

The V2 will fit the Stillen bracket but will need to come forward about 3/8" so that the pulley tracks line up straight.
Had my V2 mocked up in the car checking fitment and clearance before having to stop the project.
Since the Stillen V3 attaches to the Stillen bracket via a crescent shaped spacer I had planned to fabricate a reinforced plate that would both extend the SC'r out for the alignment and minimize or eliminate bracket flex.
I was told that the V2 should increase boost by appx. 3 lbs [according to Vortech] over the V3.
Should be noted here that the motor was built and had 9.5:1 compression.
It is my opinion that if you do go with the V2 on a stock motor you will gain performance over the v3, but you should also select a pulley size that will keep the boost at around 9 lbs or so.

Pauly Z · 02-26-2016, 11:08 AM

Quote:

Originally Posted by Z&I

The V2 will fit the Stillen bracket but will need to come forward about 3/8" so that the pulley tracks line up straight.
Had my V2 mocked up in the car checking fitment and clearance before having to stop the project.
Since the Stillen V3 attaches to the Stillen bracket via a crescent shaped spacer I had planned to fabricate a reinforced plate that would both extend the SC'r out for the alignment and minimize or eliminate bracket flex.
I was told that the V2 should increase boost by appx. 3 lbs [according to Vortech] over the V3.
Should be noted here that the motor was built and had 9.5:1 compression.
It is my opinion that if you do go with the V2 on a stock motor you will gain performance over the v3, but you should also select a pulley size that will keep the boost at around 9 lbs or so.

Do you have any pics by chance?

Sent from my SM-N920V using Tapatalk

Z&I · 02-26-2016, 11:21 AM

Quote:

Originally Posted by Pauly Z

Do you have any pics by chance?

Sent from my SM-N920V using Tapatalk

Unfortunately I don't.
The project was terminated a year ago due to cost overruns and delays.
The shop doing the work had bit off a bit more than they could chew.
Had to pull the car out of the shop and send it down to AAM.
It's now in the last phase of a custom Twin Turbo build.

TopgunZ · 02-26-2016, 12:08 PM

Quote:

Originally Posted by Pauly Z

So the oil pressure sending unit location should be ok with out a scavenge pump?

Sent from my SM-N920V using Tapatalk

That is your feed line and yes.

Pauly Z · 02-26-2016, 03:02 PM

Well Vortech called back and said my v3 cases are good. I don't think I have it in me to spend the extra and try and get the v2 to work. Lol. Just want the car to run on this air to air.

Sent from my SM-N920V using Tapatalk

Pauly Z · 02-26-2016, 03:21 PM

Question that I have regarding ecutek is do I need the stock gauge cluster? Cause I have aftermarket gauges in those spots.

Sent from my SM-N920V using Tapatalk

EVOHUNTER · 02-26-2016, 03:47 PM

Quote:

Originally Posted by Pauly Z

Question that I have regarding ecutek is do I need the stock gauge cluster? Cause I have aftermarket gauges in those spots.

Sent from my SM-N920V using Tapatalk

Last I heard you need those to get all the features, but contact Sebz from speciality Z, he'll give you a dead on answer!

02-26-2016, 09:46 AM	#1475 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Well vortech says they are gaining to send the supercharger to qc to see if the cases are good to rebuild. If not I have to buy a new one. Ugh. So if that's the case I will see about a v2. It should have all the same bolt locations for mounting correct? Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-26-2016, 10:37 AM	#1478 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	The guy flaked out on me, he had to take his kids to hockey or something lol. I wont know tell next week now, im going down to palm springs tomorrow morning for a golf tournament, for a couple of days __________________

02-26-2016, 11:00 AM	#1479 (permalink)
Z&I Enthusiast Member Join Date: Feb 2013 Location: New Jersey Posts: 410 Drives: '09 370z 6MT FI Rep Power: 12	V2 sc The V2 will fit the Stillen bracket but will need to come forward about 3/8" so that the pulley tracks line up straight. Had my V2 mocked up in the car checking fitment and clearance before having to stop the project. Since the Stillen V3 attaches to the Stillen bracket via a crescent shaped spacer I had planned to fabricate a reinforced plate that would both extend the SC'r out for the alignment and minimize or eliminate bracket flex. I was told that the V2 should increase boost by appx. 3 lbs [according to Vortech] over the V3. Should be noted here that the motor was built and had 9.5:1 compression. It is my opinion that if you do go with the V2 on a stock motor you will gain performance over the v3, but you should also select a pulley size that will keep the boost at around 9 lbs or so. __________________ . BB

02-26-2016, 03:02 PM	#1483 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Well Vortech called back and said my v3 cases are good. I don't think I have it in me to spend the extra and try and get the v2 to work. Lol. Just want the car to run on this air to air. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-26-2016, 03:21 PM	#1484 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Question that I have regarding ecutek is do I need the stock gauge cluster? Cause I have aftermarket gauges in those spots. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-25-2016, 06:39 PM	#1473 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Crap, you have me thinking about continuing my madness. I must resist, I don't think my liver can take it!!!! Sent from my iPhone using Tapatalk

02-26-2016, 09:55 AM	#1477 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Evo, did it fit?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM