Stillen Air to Air setup

EVOHUNTER · 02-23-2016, 05:05 PM

Quote:

Originally Posted by JWillis72

I would love to go do a track day in Atlanta when it runs again! We pulled the supercharger and the impeller shaft was bent so my pipes are full of fine aluminum dust. I have them all off and am taking them apart right now to run them through the parts cleaner (dish washer) before the wife gets home. I have a new V3 Si blower inbound and the old one is going back to Vortech to be rebuilt as a V3 Si. We are hoping this will come to an end in the next couple weeks.

Numonik, Topgunz kit will make this a lot easier of a process for sure.

So the V1 is a no go???

JWillis72 · 02-23-2016, 06:14 PM

I want to bad but I'm afraid to do it with this shop, I don't want the car there 6 more months. If one of you does it and it works I'm not afraid to spend more money! If that happens I'm flying Topgunz down to help me do it, I'm done with shops for a while. I hate working on cars but I'm even prepping my car for the track from now on.

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-23-2016, 06:58 PM

im going to see if I can track down a blown up one, see how it fits and move from there.

Pauly Z · 02-23-2016, 07:01 PM

So I was talking with vortech and they said they don't produce the v1 anymore. ???

Sent from my SM-N920V using Tapatalk

JWillis72 · 02-23-2016, 07:42 PM

That's news to me, they still have them in their site.

Sent from my iPhone using Tapatalk

Pauly Z · 02-23-2016, 08:00 PM

I asked them when I was talking about my rebuild. That's what the guy told me. I was quite confused myself cause yes it shows on their site.

Sent from my SM-N920V using Tapatalk

TopgunZ · 02-23-2016, 09:08 PM

Even if that was true, you want the v2 anyway. I did some more investigating and the v2 is the ticket.

Pauly Z · 02-23-2016, 09:09 PM

That's actually what the guy at Vortech said. The v2 is the same as v1 except it has helical gears and not straight gears

Sent from my SM-N920V using Tapatalk

JWillis72 · 02-24-2016, 03:27 PM

I just realized I had a 2.75" supercharger pulley on the car. I ordered a 3" from a very big company and didn't notice they sent me the wrong one. We over spun the supercharger by close to 3000 rpm.

Sent from my iPhone using Tapatalk

EliteXpress · 02-24-2016, 04:17 PM

DAM!

Will they foot the bill on a fix?

JWillis72 · 02-24-2016, 04:26 PM

Nope, I'm getting the correct pulley but that's it. Truthfully I can't say for sure that was the problem, we didn't run it all the way to redline so it was close.

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-25-2016, 09:46 AM

i found a V2 here in Edmonton, 700$ but the volute tip is kinda crushed. (easy to fix)

Guy got into a front end accident and the blower took a little bump.

I can weld up the volute and send it out for a rebuild.

I told the guy i want to see if it will work with my bracket before i buy it.

Hes stoping by tonight, we will see!

EVOHUNTER · 02-25-2016, 09:48 AM

Quote:

Originally Posted by Pauly Z

That's actually what the guy at Vortech said. The v2 is the same as v1 except it has helical gears and not straight gears

Sent from my SM-N920V using Tapatalk

Wait, wouldn't we want straight cut gears over helical?

Pauly Z · 02-25-2016, 09:57 AM

Helical gears are just quieter

Sent from my SM-N920V using Tapatalk

TopgunZ · 02-25-2016, 10:50 AM

Straight cut chatter at idle and get a little whine to them at wot, but the whine is drowned out from our exhaust.

That's pretty sweet your trying this Evo!

02-23-2016, 06:14 PM	#1457 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I want to bad but I'm afraid to do it with this shop, I don't want the car there 6 more months. If one of you does it and it works I'm not afraid to spend more money! If that happens I'm flying Topgunz down to help me do it, I'm done with shops for a while. I hate working on cars but I'm even prepping my car for the track from now on. Sent from my iPhone using Tapatalk TopgunZ likes this.

02-23-2016, 06:58 PM	#1458 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	im going to see if I can track down a blown up one, see how it fits and move from there. __________________

02-23-2016, 07:01 PM	#1459 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	So I was talking with vortech and they said they don't produce the v1 anymore. ??? Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-23-2016, 08:00 PM	#1461 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	I asked them when I was talking about my rebuild. That's what the guy told me. I was quite confused myself cause yes it shows on their site. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-23-2016, 09:08 PM	#1462 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Even if that was true, you want the v2 anyway. I did some more investigating and the v2 is the ticket. JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-23-2016, 07:42 PM	#1460 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	That's news to me, they still have them in their site. Sent from my iPhone using Tapatalk

02-23-2016, 09:09 PM	#1463 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	That's actually what the guy at Vortech said. The v2 is the same as v1 except it has helical gears and not straight gears Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-24-2016, 03:27 PM	#1464 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I just realized I had a 2.75" supercharger pulley on the car. I ordered a 3" from a very big company and didn't notice they sent me the wrong one. We over spun the supercharger by close to 3000 rpm. Sent from my iPhone using Tapatalk

02-24-2016, 04:17 PM	#1465 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	DAM! Will they foot the bill on a fix?

02-24-2016, 04:26 PM	#1466 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Nope, I'm getting the correct pulley but that's it. Truthfully I can't say for sure that was the problem, we didn't run it all the way to redline so it was close. Sent from my iPhone using Tapatalk

02-25-2016, 09:46 AM	#1467 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	i found a V2 here in Edmonton, 700$ but the volute tip is kinda crushed. (easy to fix) Guy got into a front end accident and the blower took a little bump. I can weld up the volute and send it out for a rebuild. I told the guy i want to see if it will work with my bracket before i buy it. Hes stoping by tonight, we will see! TopgunZ and JWillis72 like this. __________________

02-25-2016, 09:57 AM	#1469 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Helical gears are just quieter Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-25-2016, 10:50 AM	#1470 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Straight cut chatter at idle and get a little whine to them at wot, but the whine is drowned out from our exhaust. That's pretty sweet your trying this Evo! __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 02-25-2016 at 10:58 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM