Stillen Air to Air setup

JWillis72 · 02-16-2016, 02:16 PM

We didn't have any luck SD tuning with Ecutek but the MAF tuning worked fine. StillenZ84 has SD tuning working with his level 10 trans and that's strange because Level 10 says it's not possible. I can think that shows Sebs skills at tuning but if he's not doing it the MAF will be easier. Level 10 said set all positive trans settings to +75 and don't mess with the negative numbers.

StillenZ84 · 02-16-2016, 02:29 PM

Right. Didnt add that my comments were only if you were going SD. This is the only time that people have had problems tuning with Ecutek. You don't encounter problems tuning through the MAFs so I just assumed dave was talking about SD. Pat was pretty impressed with Seb that he was able to get the trans to work right but Seb has tuned many Fast Intentions upgraded transmissions with no problems at all so mine wasnt the first upgraded trans he has tuned on SD but I believe it was the first Level 10.

Jayhovah · 02-16-2016, 02:31 PM

At the risk of sounding stupid - why would any kind of transmission be incompatible with SD tuning? The two do not seem related in my rudimentary understanding of the topics.

JWillis72 · 02-16-2016, 04:14 PM

Pat told me that when you SD tune the car doesn't read the torque table the trans runs with correctly. Re said the line pressure is high at idle then drops when you hit the gas, that's the exact opposite how it should work. Seb clearly knows something a lot of people don't. What Pat described is exactly what mine did, the more you hit the gas the more it slipped.

mikey1600 · 02-17-2016, 02:51 AM

Quote:

Originally Posted by JWillis72

Pat told me that when you SD tune the car doesn't read the torque table the trans runs with correctly. Re said the line pressure is high at idle then drops when you hit the gas, that's the exact opposite how it should work. Seb clearly knows something a lot of people don't. What Pat described is exactly what mine did, the more you hit the gas the more it slipped.

so main reason you've been having all the issues you thought were supercharger slipping, was the trans?

JWillis72 · 02-17-2016, 07:28 AM

Quote:

Originally Posted by mikey1600

so main reason you've been having all the issues you thought were supercharger slipping, was the trans?

No it wasn't slipping, I decided to do it because I was already pushing more power than it was rated for before we started this. The fluid that came out of it had so much clutch material in it that I would guess it would have started slipping soon.

ANMVQ · 02-19-2016, 09:31 AM

Quote:

Originally Posted by JWillis72

Pat told me that when you SD tune the car doesn't read the torque table the trans runs with correctly. Re said the line pressure is high at idle then drops when you hit the gas, that's the exact opposite how it should work. Seb clearly knows something a lot of people don't. What Pat described is exactly what mine did, the more you hit the gas the more it slipped.

So here's a question why not rent a dyno and let Seb remote tune the car like he did for me? I rented the dyno and sent him logs, and the dyno outputs while talking to him on the phone?

Pauly Z · 02-19-2016, 09:33 AM

I talked with Seb yesterday and that's what I am doing after my supercharger is done getting rebuilt.

Sent from my SM-N920V using Tapatalk

JWillis72 · 02-19-2016, 09:47 AM

Quote:

Originally Posted by ANMVQ

So here's a question why not rent a dyno and let Seb remote tune the car like he did for me? I rented the dyno and sent him logs, and the dyno outputs while talking to him on the phone?

The shop that my car is at is the only Ecutek dealer around here, his good friend is tuning the car. If I have any thing that doesn't look right I will be having him double check the tune.

ANMVQ · 02-23-2016, 08:02 AM

Sounds like a plan, but you don't need a ECUTEK dealer. I use a dyno that doesn't even tune imports. LOL

Numonik · 02-23-2016, 02:45 PM

I just read all 97 pages of this thread...

I feel... I don't know what I feel, I just went through every emotion in 2 hours and I feel like I never got anywhere!!! I just started doing the conversion on my G37 and now feel like I should just stop! lol Great work guys but wow the headaches

Yes I'm just going to wait till Topgunz stuff is out.

Jwillis72 if you ever come to ATL I'm buying you a beer...

Z&I · 02-23-2016, 03:36 PM

Quote:

Originally Posted by Numonik

I just read all 97 pages of this thread...

Jwillis72 if you ever come to ATL I'm buying you a beer...

Ditto that if you ever come to J'oisey ...:

:...

JWillis72 · 02-23-2016, 03:38 PM

I would love to go do a track day in Atlanta when it runs again! We pulled the supercharger and the impeller shaft was bent so my pipes are full of fine aluminum dust. I have them all off and am taking them apart right now to run them through the parts cleaner (dish washer) before the wife gets home. I have a new V3 Si blower inbound and the old one is going back to Vortech to be rebuilt as a V3 Si. We are hoping this will come to an end in the next couple weeks.

Numonik, Topgunz kit will make this a lot easier of a process for sure.

JWillis72 · 02-23-2016, 04:34 PM

Sent from my iPhone using Tapatalk

Z&I · 02-23-2016, 04:37 PM

Quote:

Originally Posted by JWillis72

I have them all off and am taking them apart right now to run them through the parts cleaner (dish washer) before the wife gets home.

I have a new V3 Si blower inbound and the old one is going back to Vortech to be rebuilt as a V3 Si. We are hoping this will come to an end in the next couple weeks.

She'll never know, but, what's a few extra particles in the Hamburger Helper any way ???

BTW ... good choice to go with a new V3 Si

02-16-2016, 02:16 PM	#1441 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	We didn't have any luck SD tuning with Ecutek but the MAF tuning worked fine. StillenZ84 has SD tuning working with his level 10 trans and that's strange because Level 10 says it's not possible. I can think that shows Sebs skills at tuning but if he's not doing it the MAF will be easier. Level 10 said set all positive trans settings to +75 and don't mess with the negative numbers. EVOHUNTER, nvdave04 and StillenZ84 like this.

02-16-2016, 02:29 PM	#1442 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Right. Didnt add that my comments were only if you were going SD. This is the only time that people have had problems tuning with Ecutek. You don't encounter problems tuning through the MAFs so I just assumed dave was talking about SD. Pat was pretty impressed with Seb that he was able to get the trans to work right but Seb has tuned many Fast Intentions upgraded transmissions with no problems at all so mine wasnt the first upgraded trans he has tuned on SD but I believe it was the first Level 10. nvdave04 likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

02-16-2016, 04:14 PM	#1444 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Pat told me that when you SD tune the car doesn't read the torque table the trans runs with correctly. Re said the line pressure is high at idle then drops when you hit the gas, that's the exact opposite how it should work. Seb clearly knows something a lot of people don't. What Pat described is exactly what mine did, the more you hit the gas the more it slipped. BOLIO 671, nvdave04 and StillenZ84 like this.

02-19-2016, 09:33 AM	#1448 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	I talked with Seb yesterday and that's what I am doing after my supercharger is done getting rebuilt. Sent from my SM-N920V using Tapatalk ANMVQ and StillenZ84 like this. __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-23-2016, 08:02 AM	#1450 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Sounds like a plan, but you don't need a ECUTEK dealer. I use a dyno that doesn't even tune imports. LOL __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

02-23-2016, 02:45 PM	#1451 (permalink)
Numonik Base Member Join Date: Nov 2013 Location: Atlanta Posts: 16 Drives: 08 G37s coupe 6mt Rep Power: 12	I just read all 97 pages of this thread... I feel... I don't know what I feel, I just went through every emotion in 2 hours and I feel like I never got anywhere!!! I just started doing the conversion on my G37 and now feel like I should just stop! lol Great work guys but wow the headaches Yes I'm just going to wait till Topgunz stuff is out. Jwillis72 if you ever come to ATL I'm buying you a beer... Rusty, TopgunZ and Z&I like this.

02-23-2016, 03:38 PM	#1453 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I would love to go do a track day in Atlanta when it runs again! We pulled the supercharger and the impeller shaft was bent so my pipes are full of fine aluminum dust. I have them all off and am taking them apart right now to run them through the parts cleaner (dish washer) before the wife gets home. I have a new V3 Si blower inbound and the old one is going back to Vortech to be rebuilt as a V3 Si. We are hoping this will come to an end in the next couple weeks. Numonik, Topgunz kit will make this a lot easier of a process for sure. TopgunZ, Z&I and StillenZ84 like this.

02-23-2016, 04:34 PM	#1454 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM