Stillen Air to Air setup

mikey1600 · 02-13-2016, 06:12 AM

are you still running the standard charger unit or have upgraded impeller? I'm guessing the standard unit from your 9psi'ish results but just wanted to double check, can't remember seeing it through the build

BOLIO 671 · 02-13-2016, 09:23 AM

Wtf. ..No F'n way man....U gotta be $#!+*** me......What just happened?????

EVOHUNTER · 02-13-2016, 09:33 AM

Quote:

Originally Posted by JWillis72

That doesn't sound good!

Sent from my iPhone using Tapatalk

Don't worry to much man, who put the new bearings in your blower?

Was it vortech? if so they'll warranty it.

Worst case - the impeller was damaged. But I bet the bearings went, now its make a god awful noise!

I have seen new bearings go on blowers a bunch of times.

maybe your boost problem this whole time has to do with that blower??!?!?

Maybe it wasn't setup right!

JWillis72 · 02-13-2016, 10:26 AM

The rebuild was with 928 high speed kit and done by the shop here. The impeller was shimmed and spaced by 928 motorsports. This is just unbelievable, I can't believe this isn't over. I just told him I'm ordering a new supercharger and he told me to wait, I'm not sure why.

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-13-2016, 10:29 AM

Quote:

Originally Posted by JWillis72

The rebuild was with 928 high speed kit and done by the shop here. The impeller was shimmed and spaced by 928 motorsports. This is just unbelievable, I can't believe this isn't over. I just told him I'm ordering a new supercharger and he told me to wait, I'm not sure why.

Sent from my iPhone using Tapatalk

theyre most likely going to take it apart, see whats going on.

don't order a blower yet man, hold off.

Chuck33079 · 02-13-2016, 10:36 AM

Quote:

Originally Posted by JWillis72

The rebuild was with 928 high speed kit and done by the shop here.

Sent from my iPhone using Tapatalk

So, the fact that your shop toasted the blower they rebuilt means they're footing the bill, right?

JWillis72 · 02-13-2016, 10:43 AM

I don't see that happening.

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-13-2016, 10:50 AM

Get them to take a **** load of pictures.

Chuck33079 · 02-13-2016, 10:52 AM

Quote:

Originally Posted by JWillis72

I don't see that happening.

Sent from my iPhone using Tapatalk

Dude, I applaud your self control. The fact that you haven't put your tuner in the hospital multiple times to have a boot removed from his *** means you're a far better man than I.

EVOHUNTER · 02-13-2016, 10:54 AM

I hope these guys followed the install on these chargers.

Its a lot more complicated then just putting it back together.

http://www.starrland.com/Supercharge...%202-22-08.pdf

Chuck33079 · 02-13-2016, 10:56 AM

Somehow I doubt it. This shop sounds pretty close to completely incompetent when it comes to this build. Why would they change that now?

Z&I · 02-13-2016, 11:18 AM

OUCH !!!
Upgraded 928 Motorsports Impeller ???
The SC'r might have been at least part of the problem all along.
Maybe that transmission growl wasn't the trans at all ...

TopgunZ · 02-13-2016, 11:24 AM

I still can't believe this either. You were like the 4th highest torque on this kit ever and everyone but Swiss and I were on over 12psi to do it, and theirs were timebombs.

That shop had to have put it together wrong. Guessing this was the boost issue as well.

JWillis72 · 02-13-2016, 12:53 PM

The shop owner is telling me to wait but I think I'm ordering a new supercharger from vortech so I know it's right and have a warranty again.

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-13-2016, 01:17 PM

Quote:

Originally Posted by JWillis72

The shop owner is telling me to wait but I think I'm ordering a new supercharger from vortech so I know it's right and have a warranty again.

Sent from my iPhone using Tapatalk

maybe upgrade it then?

what do you guys think of the v7 blower?

I don't think its internally lubricated, but would put down massive power.

02-13-2016, 09:23 AM	#1412 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Wtf. ..No F'n way man....U gotta be $#!+*** me......What just happened????? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

02-13-2016, 10:50 AM	#1418 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Get them to take a **** load of pictures. __________________

02-13-2016, 10:54 AM	#1420 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	I hope these guys followed the install on these chargers. Its a lot more complicated then just putting it back together. http://www.starrland.com/Supercharge...%202-22-08.pdf __________________

02-13-2016, 10:56 AM	#1421 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Somehow I doubt it. This shop sounds pretty close to completely incompetent when it comes to this build. Why would they change that now? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-13-2016, 11:18 AM	#1422 (permalink)
Z&I Enthusiast Member Join Date: Feb 2013 Location: New Jersey Posts: 410 Drives: '09 370z 6MT FI Rep Power: 12	OUCH !!! Upgraded 928 Motorsports Impeller ??? The SC'r might have been at least part of the problem all along. Maybe that transmission growl wasn't the trans at all ... __________________ . BB

02-13-2016, 06:12 AM	#1411 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	are you still running the standard charger unit or have upgraded impeller? I'm guessing the standard unit from your 9psi'ish results but just wanted to double check, can't remember seeing it through the build

02-13-2016, 10:26 AM	#1414 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The rebuild was with 928 high speed kit and done by the shop here. The impeller was shimmed and spaced by 928 motorsports. This is just unbelievable, I can't believe this isn't over. I just told him I'm ordering a new supercharger and he told me to wait, I'm not sure why. Sent from my iPhone using Tapatalk

02-13-2016, 10:43 AM	#1417 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I don't see that happening. Sent from my iPhone using Tapatalk

02-13-2016, 11:24 AM	#1423 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I still can't believe this either. You were like the 4th highest torque on this kit ever and everyone but Swiss and I were on over 12psi to do it, and theirs were timebombs. That shop had to have put it together wrong. Guessing this was the boost issue as well. swiss370Z and StillenZ84 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-13-2016, 12:53 PM	#1424 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The shop owner is telling me to wait but I think I'm ordering a new supercharger from vortech so I know it's right and have a warranty again. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM