Stillen Air to Air setup

TBatt

Yep, Minuteman. Funny thing is that I'm still working with those missiles. They are used as targets for MDA.

We had a great car club there that is still going strong.

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Z&I

When the TQ takes it's nose dive away from the HP curve then it's time to shift or you're just spinning the motor with a diminishing rate of acceleration.
Although with my upgraded Stillen set up I did have improved TQ that stayed to about 6200 which would have theoretically been my optimum shift point.
Didn't get the chance to really test it out though before the motor blew.
Just from 'feeling' the motor that 6200 RPM number was about right.
Ran the motor to 7200 in first and noticed that the rate of acceleration fell off noticeably at 6500.

__________________
.
BB

Z&I

The Minuteman's have been around a really long time ... '50's ish
Tech School back in the day for them was a year long course at Chanute ...
Dreaded the thought of getting orders for Minot or Thule.
Luckily I was assigned to TAC [England AFB (Alexandria) Louisiana and then on to Nakhon Phanom Thailand.

Both 'warm weather' assignments...though I did spend the winter at Chanute.
Won't ever forget marching the cold and blustery flightline to school every morning bundled up with jacket, jacket liner, gloves, glove liners, X'tra socks and Thermals ... oh - and the Freddy Kruger Face Mask that kept freezing up from my breath and would stick to my lips and eyes.

All 3 of these bases no longer exist

__________________
.
BB

TBatt

BTW a Minuteman travels at +15,000 mph. Now that is FAST!
I remember those days at Chanute. I was there for about 9 months total.

Glad to know that you are a fellow USAF vet.

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Z&I

60' Time for the Minuteman ???

I was at Chanute Dec 65 thru April 66 ... 54th Sturon [about a block behind the chow hall]
Ended up pulling school KP Christmas Eve, Christmas Day, New Years Eve and New Years Day.
Worked the Clipper and the Coat Room ... [that coat room was KOLD]
I was an Aircraft Electrician.

Thanks for your service !

__________________
.
BB

StillenZ84

+1 Good ole SF here lol

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

TBatt

And thank you too!

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

ANMVQ

Thanx to both of you for your service!!

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

JWillis72

Agreed, thank you both for your service!


Sent from my iPhone using Tapatalk

JWillis72

Just spoke to Pat and he said everything in the trans and converter is 100%. He said there are springs in the converter than sometimes make some noise and just to make sure that wasn't it he is building a new converter for it this afternoon/ Monday morning and will ship it back on Monday. He seemed very sure the trans is perfect so now all I can think is " what the hell could that sound have been?", I have no clue so we will have to wait and see.




Sent from my iPhone using Tapatalk

TopgunZ

This noise came from what sounded like underneath the car? Have you inspected the flywheel/clutch set?

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Jayhovah

So many of your posts to this thread fall in a grey area between good news and bad news. I don't know if I am supposed to be happy or upset for you =)

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

JWillis72

There is a car on the lift right now but we will inspect it again before the trans goes back in. I will check but don't think that is it, the sound didn't follow the engine rpm and flex plate is bolted the the engine so I would expect any sound from it should follow rpm.


Sent from my iPhone using Tapatalk

wideglideleon

Sending good Karma your way.
If its true that what doesn't kill makes one stronger you'll be SUPERMAN by the end of this.

JWillis72

Or dead! Thanks for good karma!


Sent from my iPhone using Tapatalk