Stillen Air to Air setup

Masterbeatty · 12-22-2015, 07:23 PM

Good to hear that your project is turning out all right.

JWillis72 · 12-22-2015, 08:09 PM

He apparently went AWOL on us today, figures.

Z&I · 12-22-2015, 08:15 PM

Quote:

Originally Posted by JWillis72

He apparently went AWOL on us today, figures.

Christmas shopping perhaps ?

JWillis72 · 12-22-2015, 08:34 PM

I get it if he doesn't want to work, just don't lie to me and tell me you will.

Sent from my iPhone using Tapatalk

jwick · 12-22-2015, 09:46 PM

Quote:

Originally Posted by JWillis72

I get it if he doesn't want to work, just don't lie to me and tell me you will.

Sent from my iPhone using Tapatalk

Fair request

JWillis72 · 12-23-2015, 03:00 PM

This is out of control, the O2 sensor on the dyno just quit.

Sent from my iPhone using Tapatalk

jwick · 12-23-2015, 03:03 PM

Fuel trim sensor or basic O2 sensor. If latter, **** it, run it disabled.

JWillis72 · 12-23-2015, 03:12 PM

No the one on the Dynojet.

Sent from my iPhone using Tapatalk

jwick · 12-23-2015, 03:13 PM

Hahaha

That's fuckin shitty

Spooler · 12-23-2015, 03:36 PM

Quote:

Originally Posted by JWillis72

This is out of control, the O2 sensor on the dyno just quit.

Sent from my iPhone using Tapatalk

The car broke the dyno. Well that is par for the coarse. You have to just sit
back and laugh at this.

JWillis72 · 12-23-2015, 03:47 PM

This was the one pull from yesterday, we new something wasn't right with the fuel readings then. The laptop was saying 14.6 at the start but dyno was maxed out. Should have a new one in a hour or two.

Sent from my iPhone using Tapatalk

JWillis72 · 12-23-2015, 06:05 PM

This car is just cursed, now the brake is acting up on the dyno. This is almost comical at this point.

Sent from my iPhone using Tapatalk

StillenZ84 · 12-23-2015, 06:11 PM

My lord bro...

Rusty · 12-23-2015, 06:44 PM

Going from soap opera to horror movie.

JWillis72 · 12-24-2015, 06:40 PM

No news on the car but I spent the last couple hours at the shop and I found and fixed the problem with the dyno. The tuner is with his family ( as he should be) so we can't do anything until next week but we are past the dyno problems! I hope you all have a Merry Christmas!

Sent from my iPhone using Tapatalk

12-22-2015, 07:23 PM	#991 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	Good to hear that your project is turning out all right. JWillis72 likes this. __________________ 2011 MB 6MT Masterbeatty journal

12-23-2015, 03:03 PM	#997 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Fuel trim sensor or basic O2 sensor. If latter, **** it, run it disabled. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

12-23-2015, 03:13 PM	#999 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Hahaha That's fuckin shitty __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

12-23-2015, 03:47 PM	#1001 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	This was the one pull from yesterday, we new something wasn't right with the fuel readings then. The laptop was saying 14.6 at the start but dyno was maxed out. Should have a new one in a hour or two. Sent from my iPhone using Tapatalk ANMVQ, swiss370Z and StillenZ84 like this.

12-23-2015, 06:05 PM	#1002 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup This car is just cursed, now the brake is acting up on the dyno. This is almost comical at this point. Sent from my iPhone using Tapatalk Last edited by JWillis72; 12-23-2015 at 06:28 PM.

12-22-2015, 08:09 PM	#992 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	He apparently went AWOL on us today, figures.

12-22-2015, 08:34 PM	#994 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I get it if he doesn't want to work, just don't lie to me and tell me you will. Sent from my iPhone using Tapatalk

12-23-2015, 03:00 PM	#996 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	This is out of control, the O2 sensor on the dyno just quit. Sent from my iPhone using Tapatalk

12-23-2015, 03:12 PM	#998 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	No the one on the Dynojet. Sent from my iPhone using Tapatalk

12-23-2015, 06:11 PM	#1003 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	My lord bro... JWillis72 likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

12-23-2015, 06:44 PM	#1004 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Going from soap opera to horror movie. Z&I and JWillis72 like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-24-2015, 06:40 PM	#1005 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	No news on the car but I spent the last couple hours at the shop and I found and fixed the problem with the dyno. The tuner is with his family ( as he should be) so we can't do anything until next week but we are past the dyno problems! I hope you all have a Merry Christmas! Sent from my iPhone using Tapatalk swiss370Z and Z&I like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM