Stillen Air to Air setup

JWillis72

Mine is doing the same thing right now.


Sent from my iPhone using Tapatalk

StillenZ84

Yeah my old tuner gave up on me and said there was nothing else he could do to fix it. Sebastian is going to be giving it a shot pretty soon in addition to a few other problems I am having. Once it warms up it starts with no problems at all but cold starts are horrible.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

TopgunZ

I noticed in your Sig you were going with ID1000's and E85, same as I have. If you have already made the switch and the weather is getting cold then this is your issue. Cold weather on E85 will cause rough starts.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

jwick

Not calling BS as I have no clue. What's the theory to that?

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

StillenZ84

I still currently have 600cc injectors and 93 octane tune. My old tuner has been MIA for over a month now or I would have already make the switch to my 1000cc's and e. I do have the GTR plugs and a few people have told me that could be the issue. Sebastian is pretty sure he can get me lined out. This problem has been happening for over 2 months now even back when the temperature was in the 70's. Every once and awhile the cold start even throws a misfire CEL.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

EliteXpress

I too am running the GTR plugs, cold start issue is all in the tune! Last time my Z was tuned the tuner asked to keep the car over night so he could have a go with the COLD start up adjustments to prevent the misfire CEL. I have never once had an issue again.

TerribleONE

My car always fires right up however my dads GT-R has a little more trouble. (Both cars were tuned by Seb at specialty Z)

__________________

StillenZ84

Exactly what I figured because it started up normal with no problems until about the 4th flash. He changed something but told me there was nothing else he could do. Literally was on the 13th flash trying to fix it and haven't heard from him in over a month now. Such garbage. On to Sebastian!

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34