Stillen Air to Air setup

TerribleONE · 12-15-2015, 05:41 PM

Quote:

Originally Posted by JWillis72

They can't tell me if it can be tuned at this point but he said I would know tonight. If the answer is no I'm done and the car is going back to how it was, well close as we can get it. Its a track car that has kept me from the track for six months and I'm over it. One way or the other this has to end and it has to end now.

Sorry for the frustration man I feel your pain. Hope it all gets sorted out

JWillis72 · 12-15-2015, 05:48 PM

Quote:

Originally Posted by TerribleONE

Sorry for the frustration man I feel your pain. Hope it all gets sorted out

Thanks! Either way I've come to terms with it, I miss driving and either way I'm getting back to it! I dropped my son of at collage the same day as my car and he's done with his first semester and my car still doesn't run, it has to end for my sanity. I can't revers the impeller change because the old one was damaged and will leave the headers on so hopefully if it comes to that they will offset each other and I will get the same boost if it comes to that. The idle is stable so they are about to try to drive it.

Sent from my iPhone using Tapatalk

StillenZ84 · 12-15-2015, 05:51 PM

Man what a journey your car has been.

JWillis72 · 12-15-2015, 06:27 PM

So far a journey full of dead end roads.

Sent from my iPhone using Tapatalk

StillenZ84 · 12-15-2015, 06:35 PM

Yeah you have had the worst luck for sure. The time you have invested being without your car is rough, but can only get better from here. Either it works or you go back to the old setup. Making me have second thoughts of trying the a-a route.

TerribleONE · 12-15-2015, 06:48 PM

Quote:

Originally Posted by JWillis72

Thanks! Either way I've come to terms with it, I miss driving and either way I'm getting back to it! I dropped my son of at collage the same day as my car and he's done with his first semester and my car still doesn't run, it has to end for my sanity. I can't revers the impeller change because the old one was damaged and will leave the headers on so hopefully if it comes to that they will offset each other and I will get the same boost if it comes to that. The idle is stable so they are about to try to drive it.

Sent from my iPhone using Tapatalk

That's rough.

Keep us posted and GL!

JWillis72 · 12-15-2015, 07:06 PM

Quote:

Originally Posted by StillenZ84

Yeah you have had the worst luck for sure. The time you have invested being without your car is rough, but can only get better from here. Either it works or you go back to the old setup. Making me have second thoughts of trying the a-a route.

It sucks but if I go back I'm not saying I will not try again some day, I can take the air to air stuff off in three parts. I will leave the plates I had made along with the plugs, injectors, headers, impeller, flex plate and trans so it will not nearly be as hard to try again if I find the energy to try.

Sent from my iPhone using Tapatalk

jaytirbhaw · 12-15-2015, 07:17 PM

Damn. Was hoping to see the car running man ... Hopefully one day soon !

TopgunZ · 12-15-2015, 09:58 PM

So bummed they couldn't get it to work for you. I'm really confused as to why not. It seems like everything was there for it to. I mean mine worked on first try, minus the mafs being turned around, and I'm a manufacturing engineer not a mechanic. It didn't seem that hard.

You might uncover the issue after going back to w2a.

JWillis72 · 12-16-2015, 08:36 AM

The shop owner doesn't want to quit but I'm over it.We are meeting at 11am today to decide where we go from here.

JWillis72 · 12-16-2015, 11:24 AM

So I went to the shop with giving up as my plan and the car is idling perfect. I don't know if I'm happy it's idling or pissed off its not over.

Sent from my iPhone using Tapatalk

Jayhovah · 12-16-2015, 12:02 PM

Quote:

Originally Posted by JWillis72

So I went to the shop with giving up as my plan and the car is idling perfect. I don't know if I'm happy it's idling or pissed off its not over.

Sent from my iPhone using Tapatalk

You're happy, you know it. Clap your hands.

JWillis72 · 12-16-2015, 12:07 PM

I will be happy if it gets on the dyno and starts showing that it can be tuned but until then I still believe it cursed and eating my soul.

swiss370Z · 12-16-2015, 12:36 PM

Good News SIR

I hope everything goes the way you want it

Thumbs up from me

TopgunZ · 12-16-2015, 01:24 PM

It was just teasing you. Now its going to slap you in the face with 500+!

12-15-2015, 05:51 PM	#858 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Man what a journey your car has been. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

12-15-2015, 06:27 PM	#859 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	So far a journey full of dead end roads. Sent from my iPhone using Tapatalk StillenZ84 likes this.

12-15-2015, 06:35 PM	#860 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Yeah you have had the worst luck for sure. The time you have invested being without your car is rough, but can only get better from here. Either it works or you go back to the old setup. Making me have second thoughts of trying the a-a route. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

12-15-2015, 07:17 PM	#863 (permalink)
jaytirbhaw Track Member Join Date: Dec 2009 Location: NYC Posts: 814 Drives: 350z HR , Nismo 370z Rep Power: 16	Damn. Was hoping to see the car running man ... Hopefully one day soon ! __________________ 2014 Nismo #350 , Built Motor, Top Mount Single Turbo .... 620 whp/ 500 lbs wtq 2012 Track/Drift Z, build coming soon. Build Thread - http://www.the370z.com/members-370z-...70z-build.html

12-15-2015, 09:58 PM	#864 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	So bummed they couldn't get it to work for you. I'm really confused as to why not. It seems like everything was there for it to. I mean mine worked on first try, minus the mafs being turned around, and I'm a manufacturing engineer not a mechanic. It didn't seem that hard. You might uncover the issue after going back to w2a. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-16-2015, 08:36 AM	#865 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The shop owner doesn't want to quit but I'm over it.We are meeting at 11am today to decide where we go from here.

12-16-2015, 11:24 AM	#866 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	So I went to the shop with giving up as my plan and the car is idling perfect. I don't know if I'm happy it's idling or pissed off its not over. Sent from my iPhone using Tapatalk jaytirbhaw, Z&I and EliteXpress like this.

12-16-2015, 12:07 PM	#868 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I will be happy if it gets on the dyno and starts showing that it can be tuned but until then I still believe it cursed and eating my soul. swiss370Z, Z&I and StillenZ84 like this.

12-16-2015, 12:36 PM	#869 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Good News SIR I hope everything goes the way you want it Thumbs up from me __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

12-16-2015, 01:24 PM	#870 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	It was just teasing you. Now its going to slap you in the face with 500+! jwick and JWillis72 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM