Stillen Air to Air setup

StillenZ84 · 11-12-2015, 05:46 PM

The suspense........

Quote:

Originally Posted by JWillis72

The trans is going in today and we hope to tune it this week.

Sent from my iPhone using Tapatalk

JWillis72 · 11-12-2015, 05:57 PM

Quote:

Originally Posted by StillenZ84

The suspense........

Sorry, they are working on the base map right now so we can start it to fill the trans and send the map to Level 10 to set the line pressures. If we get that back tomorrow the tuning will begin.

Sent from my iPhone using Tapatalk

JWillis72 · 11-12-2015, 09:02 PM

The car is running, if we get the trans settings from Level 10 it will be on the dyno in the morning.

Sent from my iPhone using Tapatalk

YzGyz · 11-13-2015, 12:00 AM

I'll check this thread first thing in the morning and every few hours after. Exciting! !

YzGyz

JWillis72 · 11-13-2015, 07:21 AM

They don't open until 10 EST so the earliest it will be on is 11 or so but I will keep this updated. They filled the trans with 9.7 qts but it was acting sluggish, I hope that's just the line pressures.

JWillis72 · 11-13-2015, 12:09 PM

Still waiting on level 10.

Sent from my iPhone using Tapatalk

StillenZ84 · 11-13-2015, 12:44 PM

Yeah I know mine was sluggish until I got the line pressure right also. Pat told me to just have my tuner do it so it took awhile for him to get it right using Ecutek. Hopefully you get it sorted out this afternoon.

JWillis72 · 11-13-2015, 02:04 PM

We have that part worked out now but having a hard time with the base map, it's not wanting to idle smoothly.

Sent from my iPhone using Tapatalk

jwick · 11-13-2015, 02:38 PM

Quote:

Originally Posted by JWillis72

We have that part worked out now but having a hard time with the base map, it's not wanting to idle smoothly.

Sent from my iPhone using Tapatalk

How did y'all handle the PCV routing that in OEM form ties back into the intake? Do you have that routed pre-SC?

Also mine hunted for idle until I pulled the post-cat O2 sensors. Now it idles like a champ.

ANMVQ · 11-13-2015, 02:47 PM

Its past 11am (EST) 2:46PM

JWillis72 · 11-13-2015, 04:15 PM

Quote:

Originally Posted by jwick

How did y'all handle the PCV routing that in OEM form ties back into the intake? Do you have that routed pre-SC?

Also mine hunted for idle until I pulled the post-cat O2 sensors. Now it idles like a champ.

We do have it pcv pre sc, is that right?

Sent from my iPhone using Tapatalk

jwick · 11-13-2015, 05:06 PM

That's correct

JWillis72 · 11-13-2015, 05:14 PM

I gave up for the week, we just can't get a base tune to make the Fn car run right. The tuner is concerned we have a bad injector, it's time to drink it away for me!

jwick · 11-13-2015, 06:07 PM

Quote:

Originally Posted by JWillis72

I gave up for the week, we just can't get a base tune to make the Fn car run right. The tuner is concerned we have a bad injector, it's time to drink it away for me!

I recommend something heavy. 90 proof or better

JWillis72 · 11-13-2015, 06:09 PM

Captain Morgan is always the answer for me!

Sent from my iPhone using Tapatalk

11-12-2015, 09:02 PM	#573 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The car is running, if we get the trans settings from Level 10 it will be on the dyno in the morning. Sent from my iPhone using Tapatalk BOLIO 671, jwick, ANMVQ and 3 others like this.

11-13-2015, 12:00 AM	#574 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I'll check this thread first thing in the morning and every few hours after. Exciting! ! YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

11-13-2015, 07:21 AM	#575 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	They don't open until 10 EST so the earliest it will be on is 11 or so but I will keep this updated. They filled the trans with 9.7 qts but it was acting sluggish, I hope that's just the line pressures. Masterbeatty likes this.

11-13-2015, 12:44 PM	#577 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Yeah I know mine was sluggish until I got the line pressure right also. Pat told me to just have my tuner do it so it took awhile for him to get it right using Ecutek. Hopefully you get it sorted out this afternoon. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

11-13-2015, 02:47 PM	#580 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Its past 11am (EST) 2:46PM __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

11-13-2015, 12:09 PM	#576 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Still waiting on level 10. Sent from my iPhone using Tapatalk

11-13-2015, 02:04 PM	#578 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	We have that part worked out now but having a hard time with the base map, it's not wanting to idle smoothly. Sent from my iPhone using Tapatalk

11-13-2015, 05:06 PM	#582 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	That's correct __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

11-13-2015, 05:14 PM	#583 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I gave up for the week, we just can't get a base tune to make the Fn car run right. The tuner is concerned we have a bad injector, it's time to drink it away for me!

11-13-2015, 06:09 PM	#585 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Captain Morgan is always the answer for me! Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM