What you are doing now is what BP said he was going to do later this Spring to his own kit? Will you be selling the pipes or is it
|
|
LinkBack | Thread Tools | Display Modes |
10-14-2015, 06:12 PM | #526 (permalink) |
A True Z Fanatic
|
What you are doing now is what BP said he was going to do later this Spring to his own kit?
Will you be selling the pipes or is it going to be one-off?
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
10-14-2015, 06:16 PM | #528 (permalink) |
A True Z Fanatic
Join Date: Sep 2013
Location: Fort Myers FL
Posts: 2,002
Drives: 2009 370Z yellow 7AT
Rep Power: 45 |
Stillen Air to Air setup
Top, I didn't read your post right. I'm not sure how it comes out the sc as they did that pipe last. I'm going up to the other shop tomorrow and I will get more pics.
It looks like a silicone 90 straight down out of the sc to a metal 90 in this pic to me. Last edited by JWillis72; 10-14-2015 at 06:26 PM. |
10-15-2015, 12:51 PM | #530 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Ok. Yeah I can see the t clamp back there off the sc. It is a 90*.
Have they started it yet?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
10-15-2015, 01:16 PM | #531 (permalink) |
A True Z Fanatic
Join Date: Sep 2013
Location: Fort Myers FL
Posts: 2,002
Drives: 2009 370Z yellow 7AT
Rep Power: 45 |
No, trying to schedule the tune for 2nd week of November. The trans should be back around the end of October to the beginning of November but SEMA is the first week of November.
|
10-15-2015, 03:06 PM | #532 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Exciting.
Before you put the front bumper on and button everything up, you should run a recirc hose from the engine bay down to your bpv. Not sure how often you daily your car but if you do you are going to wish the bpv wasn't so loud. This thing will scare people and become annoying to you after a while. If you decide you don't want it then just pull the hose out later. Its much easier doing it that way then trying to run it with the bumper in the way.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
10-15-2015, 03:07 PM | #533 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Oh and I just realized your missing a t bolt clamp on that other end of that 90!
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
10-16-2015, 01:46 PM | #537 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
That is going to be crazy man. I know the 700whp shifts way faster than stock so I can't even imagine the 1000whp kit!
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
10-16-2015, 02:25 PM | #539 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
No, flex plate is the same. Was told that for a flex plate to fail, most times there are failing parts around it and the upgraded torque converter Level 10 adds will help add stability to the flex plate. Not sure if they swap it out with the 1000whp kit or not
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics | '10Anamoly | Intake/Exhaust | 26 | 02-14-2015 11:59 AM |
My new setup :) | Flushnismo | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 30 | 06-29-2012 12:03 PM |
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust | bloodvayne | Parts for sale (Private Classifieds) | 1 | 12-18-2011 10:25 PM |
Stillen Sway bars - 305 rear tires - setup? | FricFrac | Track / Autocross / Drifting / Dragstrip | 2 | 02-15-2011 11:33 AM |
Full Stillen Bolt-On Setup - Videos! | RCZ | Intake/Exhaust | 114 | 06-15-2009 05:32 PM |