Stillen Air to Air setup

JWillis72 · 10-08-2015, 05:38 PM

No, the supercharger just got back from 928 Motorsports this afternoon so they haven't done that side. I dropped the MAF housings off today. They were thinking they were going do the hot side at the top of the cooler to make the hot pipe short but that's not a sure thing yet.

Sent from my iPhone using Tapatalk

TopgunZ · 10-08-2015, 11:49 PM

How will they run the intake then? Not sure that will work.

JWillis72 · 10-09-2015, 07:28 AM

Like the Stillen kit did but with a single 3" pipe instead of the y pipe. On my car I have a trans cooler right in front of my drivers side front wheel that we are trying to keep hot pipes away from.

JWillis72 · 10-09-2015, 04:51 PM

Top, is your brace mounted to the supercharger using the 4 hole behind the pulley? Also I stopped by the shop and they are mounting my cooler with the in low and out high, other way wasn't working.

Sent from my iPhone using Tapatalk

TopgunZ · 10-10-2015, 01:35 AM

That's what I was saying. No way will it go in on top.

4 hole? Need more info.

Mines mounted off the mani with 3 bolts and the sc has 1.

EVOHUNTER · 10-10-2015, 09:25 AM

its goes from the manifold to the blower, there a few bolt holes behind your charger pulley, mount it up there.

JWillis72 · 10-14-2015, 12:51 PM

The pipes are done!

Sent from my iPhone using Tapatalk

swiss370Z · 10-14-2015, 01:33 PM

Looks great, Sir

JWillis72 · 10-14-2015, 02:09 PM

12108185_10153586901788567_8985280915060837080_n.jpg

StillenZ84 · 10-14-2015, 02:16 PM

Quote:

Originally Posted by JWillis72

Attachment 108719

Mann! That looks really good!

Z&I · 10-14-2015, 02:22 PM

Sebring doesn't know what it missed !

EVOHUNTER · 10-14-2015, 02:24 PM

looking really good man!

wsarver · 10-14-2015, 02:45 PM

Don't blow those a/c lines!

TopgunZ · 10-14-2015, 05:51 PM

Congrats!

How did they run the pipe off the sc? Its hard to tell in the pictures.

Is it a 90* down from the SC volute, to a 90* that comes out from the well, to a 45* and then into the ic with a slight bend?

JWillis72 · 10-14-2015, 06:12 PM

Right now it's on the Stillen piece. I hope to change it but me and this shop needed to go our own ways before they could build that or the brace like yours. The trans is coming out tomorrow to go to Level 10 then the shop that built the plates is going to work on the brace.

Sent from my iPhone using Tapatalk

10-08-2015, 11:49 PM	#512 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	How will they run the intake then? Not sure that will work. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-10-2015, 01:35 AM	#515 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	That's what I was saying. No way will it go in on top. 4 hole? Need more info. Mines mounted off the mani with 3 bolts and the sc has 1. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-10-2015, 09:25 AM	#516 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	its goes from the manifold to the blower, there a few bolt holes behind your charger pulley, mount it up there. __________________

10-14-2015, 12:51 PM	#517 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The pipes are done! Sent from my iPhone using Tapatalk swiss370Z, TopgunZ, Z&I and 3 others like this.

10-14-2015, 01:33 PM	#518 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Looks great, Sir __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

10-08-2015, 05:38 PM	#511 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	No, the supercharger just got back from 928 Motorsports this afternoon so they haven't done that side. I dropped the MAF housings off today. They were thinking they were going do the hot side at the top of the cooler to make the hot pipe short but that's not a sure thing yet. Sent from my iPhone using Tapatalk

10-09-2015, 07:28 AM	#513 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Like the Stillen kit did but with a single 3" pipe instead of the y pipe. On my car I have a trans cooler right in front of my drivers side front wheel that we are trying to keep hot pipes away from.

10-09-2015, 04:51 PM	#514 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Top, is your brace mounted to the supercharger using the 4 hole behind the pulley? Also I stopped by the shop and they are mounting my cooler with the in low and out high, other way wasn't working. Sent from my iPhone using Tapatalk

10-14-2015, 02:09 PM	#519 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	12108185_10153586901788567_8985280915060837080_n.jpg StillenZ84 likes this.

10-14-2015, 02:22 PM	#521 (permalink)
Z&I Enthusiast Member Join Date: Feb 2013 Location: New Jersey Posts: 410 Drives: '09 370z 6MT FI Rep Power: 12	Sebring doesn't know what it missed ! JWillis72 likes this. __________________ . BB

10-14-2015, 02:24 PM	#522 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	looking really good man! JWillis72 likes this. __________________

10-14-2015, 02:45 PM	#523 (permalink)
wsarver Base Member Join Date: Oct 2013 Location: Tampa, FL Posts: 115 Drives: 2015 Silverado Rep Power: 12	Don't blow those a/c lines! JWillis72 likes this.

10-14-2015, 05:51 PM	#524 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Congrats! How did they run the pipe off the sc? Its hard to tell in the pictures. Is it a 90* down from the SC volute, to a 90* that comes out from the well, to a 45* and then into the ic with a slight bend? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-14-2015, 06:12 PM	#525 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Right now it's on the Stillen piece. I hope to change it but me and this shop needed to go our own ways before they could build that or the brace like yours. The trans is coming out tomorrow to go to Level 10 then the shop that built the plates is going to work on the brace. Sent from my iPhone using Tapatalk StillenZ84 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM