Stillen Air to Air setup

TopgunZ · 10-06-2015, 08:53 PM

I'm not talking power. Just boost. Yes phunk is making like 680whp on a stock block, but he is only on 12psi.

JWillis72 · 10-06-2015, 08:54 PM

Quote:

Originally Posted by TopgunZ

I'm not talking power. Just boost. Yes phunk is making like 680whp on a stock block, but he is only on 12psi.

There is only one way to find out!

jwick · 10-06-2015, 10:05 PM

When do expect them to be finished and you on the dyno?

JWillis72 · 10-07-2015, 07:04 AM

At this point the question is what year! I have no clue but I hope it's in November.

jwick · 10-07-2015, 08:07 AM

Quote:

Originally Posted by JWillis72

At this point the question is what year! I have no clue but I hope it's in November.

The beauty of performance shop speed. They build fast things, just not fast.

TopgunZ · 10-07-2015, 09:23 AM

Yup, I was quoted 3 weeks on my engine build. Took them over 4 months. The ENTIRE summer.

jwick · 10-07-2015, 09:30 AM

Quote:

Originally Posted by TopgunZ

Yup, I was quoted 3 weeks on my engine build. Took them over 4 months. The ENTIRE summer.

And it sure isn't local or just one shop. They are ALL that way. Probably why I only farm out the jobs I'm not capable of handling myself, like tuning and welding.

JWillis72 · 10-07-2015, 09:51 AM

Quote:

Originally Posted by TopgunZ

Yup, I was quoted 3 weeks on my engine build. Took them over 4 months. The ENTIRE summer.

Who built it? IPP quoted me 5-6 weeks but I don't want it to turn into something like that.

Sent from my iPhone using Tapatalk

EVOHUNTER · 10-07-2015, 09:51 AM

its the custom stuff that takes forever, we have a 1949 international truck here, ford frame, perkins motor. the previous shop made the motor mounts out of pieces of tires, cut in squares and stacked up! hahahah. They used HEATER hose for the diesel lines!! I **** you not. this jobs been a nightmare.

TopgunZ · 10-07-2015, 11:11 AM

Quote:

Originally Posted by JWillis72

Who built it? IPP quoted me 5-6 weeks but I don't want it to turn into something like that.

Sent from my iPhone using Tapatalk

A local shop did. I told them I was going to go with IPP and it was a 6 week lead time and they said they would do it in half that. I took the bait. Then was gill gutted. Plus I had to source all my own parts. Getting the bearings was a nightmare. I don't even want to go into that whole story.

GO WITH IPP!!!

If I ever do this again it would def. be a shop that does just that for a living. Plus they have been doing it for over 20 years. They know their VQ engines.

Z&I · 10-07-2015, 11:43 AM

Quote:

Originally Posted by TopgunZ

A local shop did. I told them I was going to go with IPP and it was a 6 week lead time and they said they would do it in half that. I took the bait. Then was gill gutted. Plus I had to source all my own parts. Getting the bearings was a nightmare. I don't even want to go into that whole story.

GO WITH IPP!!!

If I ever do this again it would def. be a shop that does just that for a living. Plus they have been doing it for over 20 years. They know their VQ engines.

IPP built my motor ... Kyle Puckett is most knowledgeable and very pleasant to work with...a very good communicator.
He's the former world record holder in the 1/4 mile with his 300zx
1993 Nissan 300ZX Turbo - VG30DETT Engine - Turbo & High-Tech Performance Magazine
Still waiting to finish up the build [waiting mostly on the brakes and twin fuel pumps] >>> and then on to Dyno Day !!!

blueranger · 10-08-2015, 12:42 AM

Quote:

Originally Posted by Z&I

IPP built my motor ... Kyle Puckett is most knowledgeable and very pleasant to work with...a very good communicator.
He's the former world record holder in the 1/4 mile with his 300zx
1993 Nissan 300ZX Turbo - VG30DETT Engine - Turbo & High-Tech Performance Magazine
Still waiting to finish up the build [waiting mostly on the brakes and twin fuel pumps] >>> and then on to Dyno Day !!!

I remember Kyle back when I had my Twin Turbo 300zx purchased many parts from him.

ANMVQ · 10-08-2015, 12:43 PM

Quote:

Originally Posted by Z&I

IPP built my motor ... Kyle Puckett is most knowledgeable and very pleasant to work with...a very good communicator.
He's the former world record holder in the 1/4 mile with his 300zx
1993 Nissan 300ZX Turbo - VG30DETT Engine - Turbo & High-Tech Performance Magazine
Still waiting to finish up the build [waiting mostly on the brakes and twin fuel pumps] >>> and then on to Dyno Day !!!

So that's were you been hiding LOL.

Agree Kyle is "good" people I've spoken to him a few times and the transaction I had was seemless. I have a plan in a year or two for my car but we'll see.

Him, Built 4.2 NA motor, something like that

JWillis72 · 10-08-2015, 04:16 PM

Sent from my iPhone using Tapatalk

TopgunZ · 10-08-2015, 05:32 PM

Quote:

Originally Posted by JWillis72

Sent from my iPhone using Tapatalk

Just need some MAF housings welded in and that baby is DONE!

Do you have the hot side piping ran yet?

10-06-2015, 08:53 PM	#496 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I'm not talking power. Just boost. Yes phunk is making like 680whp on a stock block, but he is only on 12psi. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-06-2015, 10:05 PM	#498 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	When do expect them to be finished and you on the dyno? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

10-07-2015, 09:23 AM	#501 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Yup, I was quoted 3 weeks on my engine build. Took them over 4 months. The ENTIRE summer. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-07-2015, 09:51 AM	#504 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	its the custom stuff that takes forever, we have a 1949 international truck here, ford frame, perkins motor. the previous shop made the motor mounts out of pieces of tires, cut in squares and stacked up! hahahah. They used HEATER hose for the diesel lines!! I **** you not. this jobs been a nightmare. __________________

10-08-2015, 04:16 PM	#509 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Sent from my iPhone using Tapatalk StillenZ84 likes this.

10-07-2015, 07:04 AM	#499 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	At this point the question is what year! I have no clue but I hope it's in November.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM