Stillen Air to Air setup

jwick · 09-30-2015, 12:26 PM

Quote:

Originally Posted by JWillis72

The guy went on vacation and didn't tell me. It's been there for three weeks and they finally started on them this morning. Hopefully it will get moving now!

Sent from my iPhone using Tapatalk

Sounds about like performance shops

JWillis72 · 09-30-2015, 12:36 PM

My only question before we started was " Can you promise me it will be ready for Sebring the first weekend in October? If not lets wait.". They didn't even come Fn close!

JWillis72 · 09-30-2015, 12:55 PM

The start of the 3" Y, they just sent me this.

Sent from my iPhone using Tapatalk

TopgunZ · 10-02-2015, 10:10 AM

Jwillis, That thing looks awesome! Cant wait to see the final product. Mine is working out great! My intake temps are amazing. I was planning on making a video to show them at idle and then on a hard pull on how effective the cooling of the a2a is.

I have just 3D printed a gauge pod to hold my Boost gauge, Oil pressure, AFR, and my phone to display torque for intake temps and other randomness. It fits perfectly in the sunglass compartment. I could make more of these if peoples are interested. Pics to come.

And EVOHUNTER, I have a fix for your turkey call!

JWillis72 · 10-02-2015, 10:23 AM

I can't wait to see it! They are working on the intake pipe today. I sent my supercharger to 928 because when we tried to shim the impeller it was to tight and we couldn't get it back off. They are great to work with, they received my supercharger, called me for payment, fixed it and shipped it back the same day.

EVOHUNTER · 10-02-2015, 10:51 AM

HAHAHA the turkey call, so funny.

what did you figure out my friend?

TopgunZ · 10-02-2015, 11:54 AM

Basically you need to get the lightest psi spring they offer. It is the blue one. Then you need to trim it down to XX length. Ill have to measure mine but I cut off about a half inch or so. I took off about 1/4" and it wasn't enough so Ill get an exact measurement if you want me too. Then adjust the tension cap with the right amount to have it hold boost.

Bottom line is that it sounds amazing. The blow off is nice and clean and at part throttle it will not gobble you out!

I was within inches of buying the new Tial QRJ but held off and did some experimenting.

JWillis72 · 10-02-2015, 12:47 PM

Please post the length when you measure it, I don't want my car sounding like a turkey!

Sent from my iPhone using Tapatalk

JWillis72 · 10-02-2015, 03:55 PM

I also decided to use Fast Intentions tow bar, should be here Tuesday.

Sent from my iPhone using Tapatalk

JWillis72 · 10-05-2015, 05:28 PM

Top, what did you have to do to the car to be able to run E85?

Sent from my iPhone using Tapatalk

TopgunZ · 10-05-2015, 06:16 PM

I have a 340lph pump, ID1000's, and s1 CJM return system. That's all you need.

I was running 533whp on E85 without a return system but my motor did let go and I think it was because my fuel pressure was dropping like hell.

JWillis72 · 10-05-2015, 06:17 PM

ID1000= injectors?

Sent from my iPhone using Tapatalk

JWillis72 · 10-05-2015, 06:20 PM

Does the brand matter? I have deatschworks 1000cc in it now. I also have the fuel system in the car.

Sent from my iPhone using Tapatalk

TopgunZ · 10-05-2015, 06:22 PM

In regards to the spring in the bpv. I think you have to trim it to fit your design. Since all our kits are going to be different it will act differently. I was trimming mine down ever so slightly to get it right.

Just buy the smallest spring pressure, blue. Try it out in the bpv first and loosen the cap out as far as possible. From there see how bad the gobble is. Then trim it down by 1/4" at a time depending on your results. I maybe trimmed mine down 3 times taking roughly 1/4" off at a time. It barely has pressure on it siting stationary but will push down hard enough to hold my max boost.

TopgunZ · 10-05-2015, 06:40 PM

Brand shouldn't matter. I just did some research and the Injector Dynamics (ID's) are supposed to hold the best flow matched.

09-30-2015, 12:55 PM	#468 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The start of the 3" Y, they just sent me this. Sent from my iPhone using Tapatalk EVOHUNTER, wsarver and StillenZ84 like this.

10-02-2015, 10:10 AM	#469 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Jwillis, That thing looks awesome! Cant wait to see the final product. Mine is working out great! My intake temps are amazing. I was planning on making a video to show them at idle and then on a hard pull on how effective the cooling of the a2a is. I have just 3D printed a gauge pod to hold my Boost gauge, Oil pressure, AFR, and my phone to display torque for intake temps and other randomness. It fits perfectly in the sunglass compartment. I could make more of these if peoples are interested. Pics to come. And EVOHUNTER, I have a fix for your turkey call! Z&I, JWillis72 and EliteXpress like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-02-2015, 10:51 AM	#471 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	HAHAHA the turkey call, so funny. what did you figure out my friend? __________________

10-02-2015, 11:54 AM	#472 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Basically you need to get the lightest psi spring they offer. It is the blue one. Then you need to trim it down to XX length. Ill have to measure mine but I cut off about a half inch or so. I took off about 1/4" and it wasn't enough so Ill get an exact measurement if you want me too. Then adjust the tension cap with the right amount to have it hold boost. Bottom line is that it sounds amazing. The blow off is nice and clean and at part throttle it will not gobble you out! I was within inches of buying the new Tial QRJ but held off and did some experimenting. Z&I likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-05-2015, 06:16 PM	#476 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I have a 340lph pump, ID1000's, and s1 CJM return system. That's all you need. I was running 533whp on E85 without a return system but my motor did let go and I think it was because my fuel pressure was dropping like hell. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

09-30-2015, 12:36 PM	#467 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	My only question before we started was " Can you promise me it will be ready for Sebring the first weekend in October? If not lets wait.". They didn't even come Fn close!

10-02-2015, 10:23 AM	#470 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I can't wait to see it! They are working on the intake pipe today. I sent my supercharger to 928 because when we tried to shim the impeller it was to tight and we couldn't get it back off. They are great to work with, they received my supercharger, called me for payment, fixed it and shipped it back the same day.

10-02-2015, 12:47 PM	#473 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Please post the length when you measure it, I don't want my car sounding like a turkey! Sent from my iPhone using Tapatalk

10-02-2015, 03:55 PM	#474 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I also decided to use Fast Intentions tow bar, should be here Tuesday. Sent from my iPhone using Tapatalk

10-05-2015, 05:28 PM	#475 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Top, what did you have to do to the car to be able to run E85? Sent from my iPhone using Tapatalk

10-05-2015, 06:17 PM	#477 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	ID1000= injectors? Sent from my iPhone using Tapatalk

10-05-2015, 06:20 PM	#478 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup Does the brand matter? I have deatschworks 1000cc in it now. I also have the fuel system in the car. Sent from my iPhone using Tapatalk

10-05-2015, 06:22 PM	#479 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	In regards to the spring in the bpv. I think you have to trim it to fit your design. Since all our kits are going to be different it will act differently. I was trimming mine down ever so slightly to get it right. Just buy the smallest spring pressure, blue. Try it out in the bpv first and loosen the cap out as far as possible. From there see how bad the gobble is. Then trim it down by 1/4" at a time depending on your results. I maybe trimmed mine down 3 times taking roughly 1/4" off at a time. It barely has pressure on it siting stationary but will push down hard enough to hold my max boost. JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-05-2015, 06:40 PM	#480 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Brand shouldn't matter. I just did some research and the Injector Dynamics (ID's) are supposed to hold the best flow matched. JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM