Stillen Air to Air setup

TopgunZ · 08-17-2015, 12:04 PM

Quote:

Originally Posted by Masterbeatty

You should take a day off on Friday and cancel all plans to wait on your door step. I missed my delivery guy by 45 mins and had to wait 3 more days just to drive and pick something up. I also missed an autox event which I was pissed. Hopefully it all works out for you on sat.

That's the killer part. I took Friday off! However, I had the package sent to my work where there will be someone to receive it no matter what.

I took the day off to button up any loose ends required before the dyno day. If the package doesn't arrive then I will have to make my own intakes post intercooler which is not what I want to do.

On another note. I have everything ready to go with the car minus my ethanol content analyzer system and the manifold isn't bolted down yet.

I cant get to the bolts. I believe Evohunter said to use a EZ-red with flex head so I bought one, FOR $46 BUCKS, and there is no way it will work. Since it is not open ended it contacts the mani before it slips over the bolt head. Ive returned it.

So instead I have a different wrench on order. It is a ratcheting, open end style that uses a spring loaded jaw. If that doesn't work I will need to make my own tool out of some steel flat bar.

JWillis72 · 08-17-2015, 12:35 PM

Quote:

Originally Posted by TopgunZ

That's the killer part. I took Friday off! However, I had the package sent to my work where there will be someone to receive it no matter what.

I took the day off to button up any loose ends required before the dyno day. If the package doesn't arrive then I will have to make my own intakes post intercooler which is not what I want to do.

On another note. I have everything ready to go with the car minus my ethanol content analyzer system and the manifold isn't bolted down yet.

I cant get to the bolts. I believe Evohunter said to use a EZ-red with flex head so I bought one, FOR $46 BUCKS, and there is no way it will work. Since it is not open ended it contacts the mani before it slips over the bolt head. Ive returned it.

So instead I have a different wrench on order. It is a ratcheting, open end style that uses a spring loaded jaw. If that doesn't work I will need to make my own tool out of some steel flat bar.

I don't know where the wrench from Stillen went so I bought a cheap wrench that we torched and bent.

OldManGorman · 08-17-2015, 12:40 PM

Quote:

Originally Posted by Driftomodachi

Stillen just developed one:

Charge pipe comes straight out of the compressor and into the intake mani. I'm thinking the front mount is strictly for show here.

JWillis72 · 08-17-2015, 12:47 PM

That picture is still using water to cool it.

It works for the stock set up but not adding more power like the air to air.

TopgunZ · 08-17-2015, 12:54 PM

Quote:

Originally Posted by OldManGorman

Charge pipe comes straight out of the compressor and into the intake mani. I'm thinking the front mount is strictly for show here.

C'mon man. This isn't air to air. Stop posting this pic.

Z&I · 08-17-2015, 01:27 PM

Quote:

Originally Posted by OldManGorman

Charge pipe comes straight out of the compressor and into the intake mani. I'm thinking the front mount is strictly for show here.

The Stillen comes straight out of the SC'r and in to the TB's.
The I/C is in the IM after the TB's.

OldManGorman · 08-17-2015, 01:29 PM

I realized it was water to air right after I posted it. requested to have the post deleted. my bad. haha

EVOHUNTER · 08-17-2015, 04:19 PM

Hey top, I used a ezred with a crows foot to crack it loose.

TopgunZ · 08-17-2015, 05:18 PM

Oh CROWS foot!! Sorry, missed that part.

EVOHUNTER · 08-17-2015, 05:31 PM

I Used a double sided 3/8 socket adaptor, the ezred's can be used on a square bolt., triangle, triple square, 5 point and 12 point bolts. that's why I suggest the easy reds.

Worst case, go to house of tools (if I remember that's where I go for cheap tools when im at my house in Palm desert) buy a super long wrench for 20 bucks and heat/bend it so it works!

TopgunZ · 08-17-2015, 05:59 PM

Well here is my upgraded brace. The aluminum is 7075 which is at least twice if not three times stronger than this Chinese stuff from stillen and since its twice as thick that means....She is strong now...

JWillis72 · 08-17-2015, 06:01 PM

Is there a reason you went with aluminum over steel?

EVOHUNTER · 08-17-2015, 06:07 PM

looks really good!!

TopgunZ · 08-17-2015, 06:14 PM

Quote:

Originally Posted by JWillis72

Is there a reason you went with aluminum over steel?

Because it is much, much easier to mill. Oh and lightweight

.

TopgunZ · 08-18-2015, 12:58 PM

Well my intake post IC will not be here until Monday so I will not be able to dyno this Saturday. LUCKILY someone dropped out and a spot opened up for next Wednesday the 26th so I can get in soon still.

08-17-2015, 12:47 PM	#274 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup That picture is still using water to cool it. It works for the stock set up but not adding more power like the air to air. Last edited by JWillis72; 08-17-2015 at 12:52 PM.

08-17-2015, 04:19 PM	#278 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Hey top, I used a ezred with a crows foot to crack it loose. __________________

08-17-2015, 05:18 PM	#279 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Oh CROWS foot!! Sorry, missed that part. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-17-2015, 05:31 PM	#280 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	I Used a double sided 3/8 socket adaptor, the ezred's can be used on a square bolt., triangle, triple square, 5 point and 12 point bolts. that's why I suggest the easy reds. Worst case, go to house of tools (if I remember that's where I go for cheap tools when im at my house in Palm desert) buy a super long wrench for 20 bucks and heat/bend it so it works! __________________

08-17-2015, 06:07 PM	#283 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	looks really good!! __________________

08-17-2015, 01:29 PM	#277 (permalink)
OldManGorman Base Member Join Date: Jul 2015 Location: WA State Posts: 3 Drives: 15 Magma 370z Rep Power: 10	I realized it was water to air right after I posted it. requested to have the post deleted. my bad. haha

08-17-2015, 06:01 PM	#282 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Is there a reason you went with aluminum over steel?

08-18-2015, 12:58 PM	#285 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Well my intake post IC will not be here until Monday so I will not be able to dyno this Saturday. LUCKILY someone dropped out and a spot opened up for next Wednesday the 26th so I can get in soon still. Masterbeatty and JWillis72 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM