Stillen Air to Air setup

EVOHUNTER · 08-04-2015, 01:34 PM

Quote:

Originally Posted by TopgunZ

What is stock size on that jackshaft pulley?

stock is 3.12 on jack.

When I change the Jack to a 2.75, theres no way to tension the belt.

We would need a smaller belt, which is not made. So the jack has to stay stock!

TopgunZ · 08-04-2015, 01:43 PM

You wouldn't want to swap that for a smaller one anyway. If you do your back to the same ratio and will not spin faster. But you can go bigger on that jack and then you will and it will work with the belt.

EVOHUNTER · 08-04-2015, 01:45 PM

Quote:

Originally Posted by TopgunZ

You wouldn't want to swap that for a smaller one anyway. If you do your back to the same ratio and will not spin faster. But you can go bigger on that jack and then you will and it will work with the belt.

That's right! I didn't think about that!

thanks lol

TopgunZ · 08-05-2015, 09:16 AM

Update:

By clocking the volute 180* it hits the frame lip. I could cut this lip out and I think it will work. Not sure I want to start cutting into that heavy metal though. I think routing it the way Sasha did is easier. This way you only have to cut plastic. Even if I did cut that metal out I am still not 100% sure it will fit.

JWillis72 · 08-05-2015, 06:30 PM

Are both of you guys on built motors?

Sent from my iPhone using Tapatalk

StillenZ84 · 08-05-2015, 06:53 PM

^^^ I was wondering the same thing. Looks like TopgunZ does for sure. Where did you get your Pistons and Rods from? Im real afraid to go above 10-11 PSI without a built motor. I was at 10.5 and put HFCs on to get me under 10 and will prob be getting LTH's soon.

JWillis72 · 08-05-2015, 07:06 PM

I am changing mine to air to air with 1000cc injectors( they stopped making 850cc), long tube headers, GTR plugs, 928 impeller and Stillen 9 lb pulley. I'm trying to decide if should add the pulleys on the back side or wait and see how it goes first.

Sent from my iPhone using Tapatalk

EVOHUNTER · 08-05-2015, 07:32 PM

Quote:

Originally Posted by JWillis72

Are both of you guys on built motors?

Sent from my iPhone using Tapatalk

My motor is in the shop as we speak! They told me 4-5 more weeks.
This will be done next year.

As for 10-11 psi, The Bp kits are pushing 10-11psi with no issues.
Also Remember, at 500 whp they have a 100 more wtq then we will.

Im pretty sure there was a guy running around with 600whp on this forum.
hes on a stock block. If its done right, with a cjm return, tuning etc.. there
shouldn't be any problems.

JWillis72 · 08-05-2015, 07:38 PM

I like the way you think!

EVOHUNTER · 08-05-2015, 07:39 PM

Quote:

Originally Posted by JWillis72

I am changing mine to air to air with 1000cc injectors( they stopped making 850cc), long tube headers, GTR plugs, 928 impeller and Stillen 9 lb pulley. I'm trying to decide if should add the pulleys on the back side or wait and see how it goes first.

Sent from my iPhone using Tapatalk

See where your at when your at the dyno, Honestly, it takes 10 minutes to remove the belt/blower. couple more mins to switch the pulleys. You could
always buy the pulleys. Bring them to the dyno, and switch as you need.

This is what ill be doing, I've paid for an extra hour on the dyno for this reason.
aswell as other unforeseen issue that arise.

JWillis72 · 08-05-2015, 07:46 PM

I have them all on the way here and might do just that. I most likely will not decide until I see what you two do on the dyno. I hope you both make big numbers!

Sent from my iPhone using Tapatalk

JWillis72 · 08-05-2015, 07:47 PM

I'm going to Sebring Oct 3-4 to give this set up a track test.

Sent from my iPhone using Tapatalk

Pro4Jackster · 08-05-2015, 07:49 PM

Quote:

Originally Posted by JWillis72

I am changing mine to air to air with 1000cc injectors( they stopped making 850cc), long tube headers, GTR plugs, 928 impeller and Stillen 9 lb pulley. I'm trying to decide if should add the pulleys on the back side or wait and see how it goes first.

Sent from my iPhone using Tapatalk

In my opinion, the front serpentine pulley should be the last one to downsize. It has the least amount of belt wrap (around 30%). The rear pulleys have over 50% wrap, a belt that is less likely to stretch under load, and are affected less by bracket-flex.

For the sake of minimizing belt-slip, it makes more sense to increase S/C rpms by changing the ratio of the rear pulleys or going with cogs. Or even take it a step further and upsize the front pulley to a high-traction 3.3".

When people start pushing this upgraded kit, the next road block is probably going to be belt-slip.

JWillis72 · 08-05-2015, 08:04 PM

I'm having a brace built for mine to try to cut down on slipping but you make a good point, maybe I will do the back side a wait on the Stillen 9 lb pulley. Honestly I want do just do it all and say F it but I know that's probably not a good idea. That will probably still be 11-12 lbs.

Sent from my iPhone using Tapatalk

EliteXpress · 08-05-2015, 08:28 PM

My kit is seeing 10.5psi with the Stillen 9 lb pulley and test pipes.

08-04-2015, 01:43 PM	#152 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	You wouldn't want to swap that for a smaller one anyway. If you do your back to the same ratio and will not spin faster. But you can go bigger on that jack and then you will and it will work with the belt. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-05-2015, 06:30 PM	#155 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Are both of you guys on built motors? Sent from my iPhone using Tapatalk StillenZ84 likes this.

08-05-2015, 06:53 PM	#156 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	^^^ I was wondering the same thing. Looks like TopgunZ does for sure. Where did you get your Pistons and Rods from? Im real afraid to go above 10-11 PSI without a built motor. I was at 10.5 and put HFCs on to get me under 10 and will prob be getting LTH's soon. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM

08-05-2015, 07:06 PM	#157 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I am changing mine to air to air with 1000cc injectors( they stopped making 850cc), long tube headers, GTR plugs, 928 impeller and Stillen 9 lb pulley. I'm trying to decide if should add the pulleys on the back side or wait and see how it goes first. Sent from my iPhone using Tapatalk

08-05-2015, 07:38 PM	#159 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I like the way you think!

08-05-2015, 07:46 PM	#161 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I have them all on the way here and might do just that. I most likely will not decide until I see what you two do on the dyno. I hope you both make big numbers! Sent from my iPhone using Tapatalk

08-05-2015, 07:47 PM	#162 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I'm going to Sebring Oct 3-4 to give this set up a track test. Sent from my iPhone using Tapatalk

08-05-2015, 08:04 PM	#164 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I'm having a brace built for mine to try to cut down on slipping but you make a good point, maybe I will do the back side a wait on the Stillen 9 lb pulley. Honestly I want do just do it all and say F it but I know that's probably not a good idea. That will probably still be 11-12 lbs. Sent from my iPhone using Tapatalk

08-05-2015, 08:28 PM	#165 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	My kit is seeing 10.5psi with the Stillen 9 lb pulley and test pipes.