Stillen Air to Air setup

TopgunZ · 02-13-2016, 01:33 PM

I don't think the v7 fits up. But I never researched it.

Z&I · 02-13-2016, 01:57 PM

Quote:

Originally Posted by TopgunZ

I don't think the v7 fits up. But I never researched it.

It's physically larger so it isn't a straight swap.
I considered this option as well.
IMHO It is also overkill for a stock motor.
There used to be a sponsor [Bobby] who put one in for a customer [can't recall the name of the shop at the moment]
He designed his own bracket and charge tubes in order to get it in.
The bracket was mounted much lower and the arm was shorter to reduce bracket flex.
The charge tubes were of unequal length
Unfortunately he never offered this to me as a product I could buy.

Z&I · 02-13-2016, 02:18 PM

Found this on the 350z site:
This was posted regarding the physical characteristics of the different vortech SC'rs but doesn't include the actual performance specs.
You can go to the Vortech site for them.

V2 Si = std bearing 53rpm/more efficient cast impeller
V2 T = HD bearing 55krpm/cast impeller
V1 T = HD bearing but bigger straight cut gears so stronger but noisier than the V2 >V3

V3 SCi = V2 SCi = std bearing 53krpm/improved cast impellers rom sc

V2 Ti (new) = HD bearing 55rpm/ more efficient billet impeller
V1 Ti : as above

V7 YSi = HD race bearing 65krpm/ cast impeller
V7 YSi (new)= HD race bearing 65krpm/ billet impeller

The V2 as offers superior cooling but others prefer the simplicity of the self lubricated V3. But if you factor in the recommended sc oil changes it's not so simple or cheap.

JWillis72 · 02-13-2016, 03:00 PM

Topgunz and I talked about it today, im leaning V1ti or V2ti. I'm calling Vortech Monday to discuss it with them. It's more than I need but it will be nice to have options in the future. I want the HD bearings and using the cars oil.

Sent from my iPhone using Tapatalk

TopgunZ · 02-13-2016, 03:26 PM

An important spec here is that the ti flows 1450cfm, which is monster compared to the si 1150.

Z&I · 02-13-2016, 04:10 PM

Quote:

Originally Posted by JWillis72

Topgunz and I talked about it today, im leaning V1ti or V2ti. I'm calling Vortech Monday to discuss it with them. It's more than I need but it will be nice to have options in the future. I want the HD bearings and using the cars oil.

Sent from my iPhone using Tapatalk

PM sent

Z&I · 02-13-2016, 04:55 PM

V7 build - CIN Motorsports ...
Have you seen CIN Motorsports 370Z Supercharger kit

I knew I could find it ! Now I gotta go find my socks and my keys ... aaarrrggghhh.

Unfortunately, the kit was never fully developed or made available for sale

daveb91 · 02-13-2016, 06:17 PM

That's kind of a dead end

Z&I · 02-13-2016, 06:53 PM

Quote:

Originally Posted by daveb91

That's kind of a dead end

yep ... just addressing the v7 question posted earlier

EVOHUNTER · 02-13-2016, 07:23 PM

how would that thing boost properly? the right side bank is like 4 times longer.

I don't see the mafs? maybe SD tuned.. but i can see why it was never produced.

I want a v24 xb105 hahaha 2900 cfm

Z&I · 02-13-2016, 08:00 PM

Quote:

Originally Posted by EVOHUNTER

how would that thing boost properly? the right side bank is like 4 times longer.

I don't see the mafs? maybe SD tuned.. but i can see why it was never produced.

I want a v24 xb105 hahaha 2900 cfm

He wasn't 100% satisfied with it so he opted not to produce it.
It ended up being a one off for that particular customer.

To his credit he is honest...and unfortunately, out of business

nvdave04 · 02-16-2016, 12:04 PM

question for you 7at guys on ecutek ? I was told people were having issues with map sensor readings on 7at on ecutek ? I really want to switch to ecutek but want to make sure I'm safe ?

StillenZ84 · 02-16-2016, 12:14 PM

Switch to the Haltech 3 bar map sensor and you will be good.

nvdave04 · 02-16-2016, 01:13 PM

Quote:

Originally Posted by StillenZ84

Switch to the Haltech 3 bar map sensor and you will be good.

I'm a noob when it comes to boost lol I know I'm sorry.. What exactly does this do ? Is this hard to install ? And where do I buy this ? Thank you for the input

StillenZ84 · 02-16-2016, 02:04 PM

There is something with the stock MAP sensor that doesn't allow Speed Density to be tuned correctly with Ecutek. It is a simple install. I have a drawing of how it hooks up in my pictures on my profile. I am no artist but you can get the point. In addition to the Haltech MAP sensor, I installed an in-line filter as well. This makes tuning a lot more precise and your ECU will be able to tell a huge difference. It helps with a more consistent airflow. You can purchase this about anywhere online but I got mine from my tuner Seb at Specialty Z.

02-13-2016, 01:33 PM	#1426 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I don't think the v7 fits up. But I never researched it. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-13-2016, 02:18 PM	#1428 (permalink)
Z&I Enthusiast Member Join Date: Feb 2013 Location: New Jersey Posts: 410 Drives: '09 370z 6MT FI Rep Power: 12	Comparing Vortech SCR's Found this on the 350z site: This was posted regarding the physical characteristics of the different vortech SC'rs but doesn't include the actual performance specs. You can go to the Vortech site for them. V2 Si = std bearing 53rpm/more efficient cast impeller V2 T = HD bearing 55krpm/cast impeller V1 T = HD bearing but bigger straight cut gears so stronger but noisier than the V2 >V3 V3 SCi = V2 SCi = std bearing 53krpm/improved cast impellers rom sc V2 Ti (new) = HD bearing 55rpm/ more efficient billet impeller V1 Ti : as above V7 YSi = HD race bearing 65krpm/ cast impeller V7 YSi (new)= HD race bearing 65krpm/ billet impeller The V2 as offers superior cooling but others prefer the simplicity of the self lubricated V3. But if you factor in the recommended sc oil changes it's not so simple or cheap. __________________ . BB

02-13-2016, 03:00 PM	#1429 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Topgunz and I talked about it today, im leaning V1ti or V2ti. I'm calling Vortech Monday to discuss it with them. It's more than I need but it will be nice to have options in the future. I want the HD bearings and using the cars oil. Sent from my iPhone using Tapatalk jwick and EliteXpress like this.

02-13-2016, 03:26 PM	#1430 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	An important spec here is that the ti flows 1450cfm, which is monster compared to the si 1150. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-13-2016, 04:55 PM	#1432 (permalink)
Z&I Enthusiast Member Join Date: Feb 2013 Location: New Jersey Posts: 410 Drives: '09 370z 6MT FI Rep Power: 12	V7 V7 build - CIN Motorsports ... Have you seen CIN Motorsports 370Z Supercharger kit I knew I could find it ! Now I gotta go find my socks and my keys ... aaarrrggghhh. Unfortunately, the kit was never fully developed or made available for sale EVOHUNTER likes this. __________________ . BB Last edited by Z&I; 02-13-2016 at 04:59 PM.

02-13-2016, 06:17 PM	#1433 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 25	That's kind of a dead end

02-13-2016, 07:23 PM	#1435 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	how would that thing boost properly? the right side bank is like 4 times longer. I don't see the mafs? maybe SD tuned.. but i can see why it was never produced. I want a v24 xb105 hahaha 2900 cfm __________________ Last edited by EVOHUNTER; 02-13-2016 at 07:28 PM.

02-16-2016, 12:04 PM	#1437 (permalink)
nvdave04 Base Member Join Date: Jun 2014 Location: Covington LA- NOLA Posts: 108 Drives: 2013 370z base Rep Power: 12	question for you 7at guys on ecutek ? I was told people were having issues with map sensor readings on 7at on ecutek ? I really want to switch to ecutek but want to make sure I'm safe ? __________________ 2013 370z base brilliant silver - AT -stillen supercharger kit -upgraded impeller, csf radiator,GTR injectors, walboro fuel pump, berks HFC, AAM S-line midpipe AAM S-line axleback - Z1 34 row oil cooler -stillen trans cooler, custom UpRev tune avantgarde m310 wheels

02-16-2016, 12:14 PM	#1438 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Switch to the Haltech 3 bar map sensor and you will be good. nvdave04 likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

02-16-2016, 02:04 PM	#1440 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	There is something with the stock MAP sensor that doesn't allow Speed Density to be tuned correctly with Ecutek. It is a simple install. I have a drawing of how it hooks up in my pictures on my profile. I am no artist but you can get the point. In addition to the Haltech MAP sensor, I installed an in-line filter as well. This makes tuning a lot more precise and your ECU will be able to tell a huge difference. It helps with a more consistent airflow. You can purchase this about anywhere online but I got mine from my tuner Seb at Specialty Z. BOLIO 671, swiss370Z and nvdave04 like this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM