Stillen Air to Air setup

JWillis72 · 02-03-2016, 04:25 PM

That's all dust

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-03-2016, 04:26 PM

Your Automatic tensioner could be worn out.

Did the last shop have it off and not install it properly?

Your local shop can find the tension torque specs.

-Half inch torque wrench, with a 3/8 reducer. put it in the tensioner slot, see what kind of torque it takes to move that baby, should tell you if its worn out or not.

Edit: from identifix

Inspect indicator marks and replace belt if mark is not between reference marks on tensioner. So check for those marks on the tensioner, make sure there inbetween.

JWillis72 · 02-03-2016, 04:34 PM

It right at the middle of the marks.

Sent from my iPhone using Tapatalk

TopgunZ · 02-03-2016, 04:38 PM

Maybe you could open up the tensioner enough to try and spin that pulley to make sure it is spinning like it should?

JWillis72 · 02-03-2016, 05:09 PM

I will try that if we ever get the trans in, this thing is a royal pain to get to line up!

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-03-2016, 05:10 PM

update, I just checked my car.

I have the fine black dust on my serp side aswell.

JWillis72 · 02-03-2016, 05:25 PM

Good to know, maybe we will start with the back and see what that does. Still fighting the trans right now, it just isn't lining up.

YzGyz · 02-03-2016, 05:41 PM

Are you turning the back wheels to get the splines to match up?

YzGyz

JWillis72 · 02-03-2016, 05:55 PM

The back wheels? The splines are all lined up.

Sent from my iPhone using Tapatalk

EVOHUNTER · 02-03-2016, 05:56 PM

Quote:

Originally Posted by YzGyz

Are you turning the back wheels to get the splines to match up?

YzGyz

I don't think this would do anything considering the drive shaft isn't installed yet?

EVOHUNTER · 02-03-2016, 05:58 PM

Quote:

Originally Posted by JWillis72

Good to know, maybe we will start with the back and see what that does. Still fighting the trans right now, it just isn't lining up.

The black dust is from the pulleys that are painted black I think...

it was a royal pain in the arse trying to get mine lined up aswell

YzGyz · 02-03-2016, 06:03 PM

LOL.. Duh forgot about that one.. lol.. He can temporary stuck the driveshaft in ans turn that by hand.

YzGyz

JWillis72 · 02-03-2016, 06:40 PM

Would that work on a automatic? They just text me that they got it back in the car.

JWillis72 · 02-03-2016, 08:03 PM

Who is it trying to sell just the plate for $500 on Facebook ?

Sent from my iPhone using Tapatalk

StillenZ84 · 02-03-2016, 08:13 PM

I know exactly who it is. Talked to him a few days ago and he quoted me $200 for that bracket.

02-03-2016, 04:26 PM	#1262 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Your Automatic tensioner could be worn out. Did the last shop have it off and not install it properly? Your local shop can find the tension torque specs. -Half inch torque wrench, with a 3/8 reducer. put it in the tensioner slot, see what kind of torque it takes to move that baby, should tell you if its worn out or not. Edit: from identifix Inspect indicator marks and replace belt if mark is not between reference marks on tensioner. So check for those marks on the tensioner, make sure there inbetween. __________________

02-03-2016, 04:38 PM	#1264 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Maybe you could open up the tensioner enough to try and spin that pulley to make sure it is spinning like it should? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-03-2016, 05:10 PM	#1266 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	update, I just checked my car. I have the fine black dust on my serp side aswell. __________________

02-03-2016, 05:41 PM	#1268 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Are you turning the back wheels to get the splines to match up? YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

02-03-2016, 06:03 PM	#1272 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	LOL.. Duh forgot about that one.. lol.. He can temporary stuck the driveshaft in ans turn that by hand. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

02-03-2016, 04:25 PM	#1261 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	That's all dust Sent from my iPhone using Tapatalk

02-03-2016, 04:34 PM	#1263 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	It right at the middle of the marks. Sent from my iPhone using Tapatalk

02-03-2016, 05:09 PM	#1265 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I will try that if we ever get the trans in, this thing is a royal pain to get to line up! Sent from my iPhone using Tapatalk

02-03-2016, 05:25 PM	#1267 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Good to know, maybe we will start with the back and see what that does. Still fighting the trans right now, it just isn't lining up.

02-03-2016, 05:55 PM	#1269 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The back wheels? The splines are all lined up. Sent from my iPhone using Tapatalk

02-03-2016, 06:40 PM	#1273 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Would that work on a automatic? They just text me that they got it back in the car.

02-03-2016, 08:03 PM	#1274 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup Who is it trying to sell just the plate for $500 on Facebook ? Sent from my iPhone using Tapatalk

02-03-2016, 08:13 PM	#1275 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	I know exactly who it is. Talked to him a few days ago and he quoted me $200 for that bracket. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM