Stillen Air to Air setup

TopgunZ · 01-28-2016, 09:18 AM

Quote:

Originally Posted by Chuck33079

Any chance of your setup getting reproduced? Seems like the interest is there.

Ive thought about it. But when you have guys that are much better at that sort of thing, (BP), then I didn't want to make a competition about it. Sasha still states he is going to pursue this in the summer. He is a good TIG welder, I suck.

If I did I would just model everything I have on my car in CAD then send it out to a third party to have everything made up. This would take some time but the kit would be pretty sweet. I do however have a 3 stall heated garage now so I can actually work on something out there.

EVOHUNTER · 01-28-2016, 09:42 AM

Sasha has already been working on it, were going to try 2 things.

Sebz is down end of may, so tuning will start then,

hes going to try to make a dual pipe into the manifold, but were also going to build a single pipe - 4.5" where the mafs mount.

This way if we run into problems with the dual setup, will have the single ready to go!

TopgunZ · 01-28-2016, 12:45 PM

Not real busy at work today. So I have spent most of the day looking at what it would take to have my kit replicated, with MANY improvements. I am curious as to the amount of guys on this forum that would want a kit. Right now I can only think of 5 or so. At that amount it wouldn't pay to reverse engineer it and get a shop to weld up a new, improved prototype that would be worthy of selling. I did find a great shop with an awesome rep that wants to do it. So I need to get a certain amount of interest before I would have them pull it all together. Of course I would use the first one they did.

IF INTERESTED PM ME.... "I'd take one"

Elmo370z · 01-28-2016, 01:12 PM

Quote:

Originally Posted by TopgunZ

Not real busy at work today. So I have spent most of the day looking at what it would take to have my kit replicated, with MANY improvements. I am curious as to the amount of guys on this forum that would want a kit. Right now I can only think of 5 or so. At that amount it wouldn't pay to reverse engineer it and get a shop to weld up a new, improved prototype that would be worthy of selling. I did find a great shop with an awesome rep that wants to do it. So I need to get a certain amount of interest before I would have them pull it all together. Of course I would use the first one they did.

IF INTERESTED PM ME.... "I'd take one"

I have a friend who is interested in this kit. Could you pm me detail about the kit so i can rely the information over to him.

JWillis72 · 01-30-2016, 02:33 PM

My friends are at Homestead and I'm watching the 24 hours of Daytona, this sucks!

Sent from my iPhone using Tapatalk

mikey1600 · 01-31-2016, 03:12 AM

Quote:

Originally Posted by JWillis72

My friends are at Homestead and I'm watching the 24 hours of Daytona, this sucks!

Sent from my iPhone using Tapatalk

Getting close now man!! can't wait to see your results

swiss370Z · 01-31-2016, 05:21 AM

Quote:

Originally Posted by mikey1600

Getting close now man!! can't wait to see your results

+1

Push you luck!

JWillis72 · 01-31-2016, 10:10 AM

Thanks guys! The trans should be back tomorrow by the end of the day. In still concerned about the sound we thought was in the trans but I'm excited to see if the new pulley and tighter belt changes thinks.

Sent from my iPhone using Tapatalk

TopgunZ · 01-31-2016, 01:07 PM

Poll

If you went air to air would you rather:
A. Turn sc volute to face opposite direction- requires Taking out 8 small screws from front of sc unit that are tough to get to, but possible.
B. Cut radiator fan shroud - plastic, would require an angle grinder.
C. Have oval pipe off sc to fit between engine and radiator shroud - no modification required. Very slight loss of cfm. This could be used in the "out" from intercooler also, so there is zero cutting at all.

The only way to get piping in the engine bay, if round, is to cut, open up, the holes where the oem intake normally is. This is required on gen 3 stillen intakes as well.

StillenZ84 · 01-31-2016, 01:14 PM

A- but wouldn't have a problem with any.

x2o · 01-31-2016, 05:21 PM

Quote:

Originally Posted by TopgunZ

Poll

If you went air to air would you rather:
A. Turn sc volute to face opposite direction- requires Taking out 8 small screws from front of sc unit that are tough to get to, but possible.
B. Cut radiator fan shroud - plastic, would require an angle grinder.
C. Have oval pipe off sc to fit between engine and radiator shroud - no modification required. Very slight loss of cfm. This could be used in the "out" from intercooler also, so there is zero cutting at all.

The only way to get piping in the engine bay, if round, is to cut, open up, the holes where the oem intake normally is. This is required on gen 3 stillen intakes as well.

I'd prefer option A as well, but the other options aren't deal-breakers either!

JWillis72 · 02-03-2016, 03:45 PM

We are installing the trans again. I stopped and got a led flash light so I could take a good look at the belts. Unfortunately I believe both are slipping. Any suggestions on how to stop the serpentine belt from slipping?

Sent from my iPhone using Tapatalk

TBatt · 02-03-2016, 03:57 PM

Quote:

Originally Posted by JWillis72

We are installing the trans again. I stopped and got a led flash light so I could take a good look at the belts. Unfortunately I believe both are slipping. Any suggestions on how to stop the serpentine belt from slipping?

Sent from my iPhone using Tapatalk

Belt Dressing might help. I like the Ranch flavored one best.......

http://www.amazon.com/Loctite-37581-...KZB2V3855X73F3

TopgunZ · 02-03-2016, 04:00 PM

What makes you think your serp belt is slipping? Lots of belt dust around it?

JWillis72 · 02-03-2016, 04:24 PM

Sent from my iPhone using Tapatalk

01-28-2016, 09:42 AM	#1247 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Sasha has already been working on it, were going to try 2 things. Sebz is down end of may, so tuning will start then, hes going to try to make a dual pipe into the manifold, but were also going to build a single pipe - 4.5" where the mafs mount. This way if we run into problems with the dual setup, will have the single ready to go! JWillis72 and StillenZ84 like this. __________________

01-28-2016, 12:45 PM	#1248 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Not real busy at work today. So I have spent most of the day looking at what it would take to have my kit replicated, with MANY improvements. I am curious as to the amount of guys on this forum that would want a kit. Right now I can only think of 5 or so. At that amount it wouldn't pay to reverse engineer it and get a shop to weld up a new, improved prototype that would be worthy of selling. I did find a great shop with an awesome rep that wants to do it. So I need to get a certain amount of interest before I would have them pull it all together. Of course I would use the first one they did. IF INTERESTED PM ME.... "I'd take one" EVOHUNTER, RadioFlyer, StillenZ84 and 2 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-31-2016, 10:10 AM	#1253 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Thanks guys! The trans should be back tomorrow by the end of the day. In still concerned about the sound we thought was in the trans but I'm excited to see if the new pulley and tighter belt changes thinks. Sent from my iPhone using Tapatalk swiss370Z likes this.

01-31-2016, 01:07 PM	#1254 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Poll If you went air to air would you rather: A. Turn sc volute to face opposite direction- requires Taking out 8 small screws from front of sc unit that are tough to get to, but possible. B. Cut radiator fan shroud - plastic, would require an angle grinder. C. Have oval pipe off sc to fit between engine and radiator shroud - no modification required. Very slight loss of cfm. This could be used in the "out" from intercooler also, so there is zero cutting at all. The only way to get piping in the engine bay, if round, is to cut, open up, the holes where the oem intake normally is. This is required on gen 3 stillen intakes as well. JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-31-2016, 01:14 PM	#1255 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	A- but wouldn't have a problem with any. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

01-30-2016, 02:33 PM	#1250 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	My friends are at Homestead and I'm watching the 24 hours of Daytona, this sucks! Sent from my iPhone using Tapatalk

02-03-2016, 03:45 PM	#1257 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	We are installing the trans again. I stopped and got a led flash light so I could take a good look at the belts. Unfortunately I believe both are slipping. Any suggestions on how to stop the serpentine belt from slipping? Sent from my iPhone using Tapatalk

02-03-2016, 04:00 PM	#1259 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	What makes you think your serp belt is slipping? Lots of belt dust around it? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-03-2016, 04:24 PM	#1260 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM