Stillen Air to Air setup

jwick · 10-05-2015, 06:43 PM

Injector Dynamics are the way to go but I wouldn't rebuy if you already have a quality brand.

My list to go E85 is the same as Topguns listed.

JWillis72 · 10-06-2015, 01:58 PM

My F.I. Tow bar showed up today.

Sent from my iPhone using Tapatalk

JWillis72 · 10-06-2015, 02:28 PM

Sent from my iPhone using Tapatalk

TopgunZ · 10-06-2015, 03:55 PM

Hell yeah!

JWillis72 · 10-06-2015, 04:41 PM

Sent from my iPhone using Tapatalk

wsarver · 10-06-2015, 04:43 PM

Quote:

Originally Posted by JWillis72

Sent from my iPhone using Tapatalk

Car says CHEEEEEEEEEEEESE!

TopgunZ · 10-06-2015, 05:31 PM

Is that a top in top out IC? I cant tell where its inlet is.

I see your at sea level or near it anyway. Cant wait to see what you make.

What will be your pulley setup again? Make it the same as mine so we can see how much altitude affects it...lol..

I was spinning my tires all the way through 2nd today and wasn't even on it hard. Stupid cold weather..... My tires are **** at anything under 70*.

I really need to make a video of how good my IC cools the charge. Its almost hard to believe. I didn't want to say anything till I could prove it but it literally only raises 5* on a 2nd gear pull to redline. Ive been wanting to make a video but the problem is I use my phone for displaying my intake temps so I cant use it to make video.

JWillis72 · 10-06-2015, 06:01 PM

It's the same cooler you used ( bottom in top out)but they are cutting the undertray to set it a little lower. I am at sea level basically but my car will not be E85, I would love to but Sebring is my favorite track and I would have to drive for an hour every time I need fuel. I have the Stillen 9 lb and 2.75 on the supercharger.

Sent from my iPhone using Tapatalk

TopgunZ · 10-06-2015, 07:27 PM

Damn! Your going to hit around 15psi! That will demolish the 500hp goal. Hope you don't get slip or flex. If so we will work around it.

Make sure to log your boost when on the dyno so we can see if it does.

That ic is amazing. Treadstone for the win. The bp kits use these and now I see why. Badass quality.

Fyi. I am advanced 22* with e.

JWillis72 · 10-06-2015, 07:33 PM

I'm also doing PPE long tube headers so it might drop some. When the tubes are done they are build a brace like yours so hopefully that will do it.

Sent from my iPhone using Tapatalk

TopgunZ · 10-06-2015, 07:40 PM

Your going to put down some serious power. What compression did you go with again?

You should throw all your mods in your sig.

JWillis72 · 10-06-2015, 07:43 PM

It's a stock block! I'm prepared to have one built if I blow it up.

Sent from my iPhone using Tapatalk

JWillis72 · 10-06-2015, 07:48 PM

I was going to start lower psi but I'm spending $4k to have level 10 build the trans to take 800whp so why hold back.

Sent from my iPhone using Tapatalk

TopgunZ · 10-06-2015, 08:10 PM

Well. You might hold the stock block boost record..lol.

The sc won't make as much torque as turbos and that's what really eats rods. You'll probably be ok. But for how long I can't say. I know you track it.

JWillis72 · 10-06-2015, 08:29 PM

I don't think it will be a record but I'm hoping to make good numbers. If I blow it we will swing for the fences.

10-05-2015, 06:43 PM	#481 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Injector Dynamics are the way to go but I wouldn't rebuy if you already have a quality brand. My list to go E85 is the same as Topguns listed. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

10-06-2015, 02:28 PM	#483 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Sent from my iPhone using Tapatalk jwick, ANMVQ, swiss370Z and 4 others like this.

10-06-2015, 03:55 PM	#484 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Hell yeah! __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-06-2015, 04:41 PM	#485 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Sent from my iPhone using Tapatalk Z&I likes this.

10-06-2015, 05:31 PM	#487 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Is that a top in top out IC? I cant tell where its inlet is. I see your at sea level or near it anyway. Cant wait to see what you make. What will be your pulley setup again? Make it the same as mine so we can see how much altitude affects it...lol.. I was spinning my tires all the way through 2nd today and wasn't even on it hard. Stupid cold weather..... My tires are **** at anything under 70. I really need to make a video of how good my IC cools the charge. Its almost hard to believe. I didn't want to say anything till I could prove it but it literally only raises 5 on a 2nd gear pull to redline. Ive been wanting to make a video but the problem is I use my phone for displaying my intake temps so I cant use it to make video. StillenZ84 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-06-2015, 01:58 PM	#482 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	My F.I. Tow bar showed up today. Sent from my iPhone using Tapatalk

10-06-2015, 06:01 PM	#488 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	It's the same cooler you used ( bottom in top out)but they are cutting the undertray to set it a little lower. I am at sea level basically but my car will not be E85, I would love to but Sebring is my favorite track and I would have to drive for an hour every time I need fuel. I have the Stillen 9 lb and 2.75 on the supercharger. Sent from my iPhone using Tapatalk

10-06-2015, 07:27 PM	#489 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Damn! Your going to hit around 15psi! That will demolish the 500hp goal. Hope you don't get slip or flex. If so we will work around it. Make sure to log your boost when on the dyno so we can see if it does. That ic is amazing. Treadstone for the win. The bp kits use these and now I see why. Badass quality. Fyi. I am advanced 22* with e. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 10-06-2015 at 07:36 PM.

10-06-2015, 07:33 PM	#490 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I'm also doing PPE long tube headers so it might drop some. When the tubes are done they are build a brace like yours so hopefully that will do it. Sent from my iPhone using Tapatalk

10-06-2015, 07:40 PM	#491 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Your going to put down some serious power. What compression did you go with again? You should throw all your mods in your sig. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-06-2015, 07:43 PM	#492 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup It's a stock block! I'm prepared to have one built if I blow it up. Sent from my iPhone using Tapatalk ANMVQ and Z&I like this.

10-06-2015, 07:48 PM	#493 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I was going to start lower psi but I'm spending $4k to have level 10 build the trans to take 800whp so why hold back. Sent from my iPhone using Tapatalk jwick and StillenZ84 like this.

10-06-2015, 08:10 PM	#494 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Well. You might hold the stock block boost record..lol. The sc won't make as much torque as turbos and that's what really eats rods. You'll probably be ok. But for how long I can't say. I know you track it. EVOHUNTER likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-06-2015, 08:29 PM	#495 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I don't think it will be a record but I'm hoping to make good numbers. If I blow it we will swing for the fences. StillenZ84 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM