Stillen Air to Air setup

JWillis72 · 08-13-2015, 06:06 PM

I also ordered the air straightener that Top recommended, I get orders from them the next day.

Sent from my iPhone using Tapatalk

EVOHUNTER · 08-13-2015, 06:39 PM

Quote:

Originally Posted by JWillis72

Evo, did you know they no longer make the 850cc injectors you have? We are using 1000s in mine.

Sent from my iPhone using Tapatalk

Really??

I wonder if there was problem with them? :/

That air straighter is awesome, I got mine coming aswell!

Looks like all of us are moving in the right directions!

JWillis72 · 08-13-2015, 06:48 PM

They come in 600 or 1000 now. I ordered a set of 850s and got 1000 so I sent them back and called Z1 for 850s and was just told they stopped making them.

Sent from my iPhone using Tapatalk

JWillis72 · 08-13-2015, 06:58 PM

I'm on a stock block and stock 7AT so I kind of expect to brake one of them but I hope it's not both at the same time! My plan is to get this all done before Oct 3rd so I can take it to Sebring that weekend and see what it can do.

StillenZ84 · 08-13-2015, 07:43 PM

Quote:

Originally Posted by JWillis72

I also ordered the air straightener that Top recommended, I get orders from them the next day.

Sent from my iPhone using Tapatalk

So where exactly is this air straightener put? I tried to order 850s as well last week and was told they were no longer made and went with 1000s also.

Z&I · 08-13-2015, 09:26 PM

Found a few pics of the Stillen Bracket on line and did a real quick job of photoshopping them to just to illustrate the weak area I'm referring to.
If you notice in the picture that has the SC'r attached to the bracket it actually looks like it is solidly designed and constructed.
It is, however, deceiving.
The SC'r itself stands off from the bracket by about a 1/4" or so with a rather stingy spacer --- and to make matters worse, it is only supported part way around.
The SCR is held in space (pun intended) by only the 3 bolts and the small surface area of the spacer.

In the next photo I airbrushed out the SC'r [very quickly and not to scale] just to illustrate the small surface area [highlighted in red - again not to scale] that is being asked to support the SC'r under load.
This is where I feel there is the need for reinforcement in order to reduce the bracket flex.

There is room enough to create a more substantial spacer - extending it's mass to the left [clearing the belts] bolting it to to the main bracket plate with either 3 more bolts or 2 bolts and a locator pin.
This along with EVO's much improved tensioner plate on the other side of the bracket plate should make the bracket super strong.

I'll be the first to kick in another case of beer to EVO's buddy !

EliteXpress · 08-13-2015, 09:50 PM

Supercharger cog belt being constantly chewed

ANMVQ · 08-13-2015, 10:03 PM

Quote:

Originally Posted by JWillis72

I also ordered the air straightener that Top recommended, I get orders from them the next day.

Sent from my iPhone using Tapatalk

Looks like my old DSM's honeycomb, remember we used to remove parts of them to make more power lol

Z&I · 08-13-2015, 10:16 PM

Quote:

Originally Posted by EliteXpress

Supercharger cog belt being constantly chewed

Awesome Info ...

EVOHUNTER · 08-13-2015, 10:58 PM

Quote:

Originally Posted by StillenZ84

So where exactly is this air straightener put? I tried to order 850s as well last week and was told they were no longer made and went with 1000s also.

Right before the Mafs in the 3" section. Straightens the air out so your MAFs can get a good reading. There suppose to improve idle and such. for 20 bucks, i think its a no brainer.

Quote:

Found a few pics of the Stillen Bracket on line and did a real quick job of photoshopping them to just to illustrate the weak area I'm referring to.
If you notice in the picture that has the SC'r attached to the bracket it actually looks like it is solidly designed and constructed.
It is, however, deceiving.
The SC'r itself stands off from the bracket by about a 1/4" or so with a rather stingy spacer --- and to make matters worse, it is only supported part way around.
The SCR is held in space (pun intended) by only the 3 bolts and the small surface area of the spacer.

In the next photo I airbrushed out the SC'r [very quickly and not to scale] just to illustrate the small surface area [highlighted in red - again not to scale] that is being asked to support the SC'r under load.
This is where I feel there is the need for reinforcement in order to reduce the bracket flex.

There is room enough to create a more substantial spacer - extending it's mass to the left [clearing the belts] bolting it to to the main bracket plate with either 3 more bolts or 2 bolts and a locator pin.
This along with EVO's much improved tensioner plate on the other side of the bracket plate should make the bracket super strong.

I'll be the first to kick in another case of beer to EVO's buddy !

Your exactly right, theres basically nothing holding up this charger.

Quote:

Supercharger cog belt being constantly chewed

This design has a MAJOR flaw, He has his brace on his charger. which is fine.
BUT he has the other end of his bracket hooked up to the body!! super big no no..
What happens when your motor moves back and forth from torque lol.

thought that was funny!! i guess he won't need solid motor mounts on one side at least lol

ANMVQ · 08-14-2015, 08:38 AM

Quote:

Originally Posted by EliteXpress

Supercharger cog belt being constantly chewed

I don't remember how this one worked out but there is one on here where the bracket is attached to the block. This is the correct way :0 I'd think

here and JTran Studios builds these braces.
Boost Gauge Behaviour - Stillen SC

TopgunZ · 08-14-2015, 09:45 AM

I love this forum! So much good info is being shared. Thank you all for preventing us from beating dead horses.

EVOHUNTER · 08-15-2015, 11:31 AM

Hey top,

Did you get your intake pipe all sorted out

Pro4Jackster · 08-15-2015, 11:53 AM

Quick question since a lot of Supercharged guys are in here. Can Ecutek support an aftermarket IAT sensor? (Tapped into the IM after the heat exchanger) Would be worth looking into for guys who want to run a safer tune with low-moderate boost. That would give you loads of info on the A/W intercoolers efficiency.

TopgunZ · 08-15-2015, 03:32 PM

Quote:

Originally Posted by EVOHUNTER

Hey top,

Did you get your intake pipe all sorted out

Yeah man. Sasha is sending it today!!!

08-13-2015, 06:06 PM	#241 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I also ordered the air straightener that Top recommended, I get orders from them the next day. Sent from my iPhone using Tapatalk ANMVQ, EVOHUNTER and StillenZ84 like this.

08-14-2015, 09:45 AM	#252 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I love this forum! So much good info is being shared. Thank you all for preventing us from beating dead horses. swiss370Z, EVOHUNTER and JWillis72 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-15-2015, 11:31 AM	#253 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Hey top, Did you get your intake pipe all sorted out __________________

08-15-2015, 11:53 AM	#254 (permalink)
Pro4Jackster Base Member Join Date: Oct 2011 Location: NW Houston Posts: 130 Drives: '08 350Z Rep Power: 14	Quick question since a lot of Supercharged guys are in here. Can Ecutek support an aftermarket IAT sensor? (Tapped into the IM after the heat exchanger) Would be worth looking into for guys who want to run a safer tune with low-moderate boost. That would give you loads of info on the A/W intercoolers efficiency. __________________ Jtranbuilt '08 Z [Jtran PT7075 Single - Fujitsubo - Transgo - Wilwood - TE37SL - BC Racing]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM

08-13-2015, 06:48 PM	#243 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	They come in 600 or 1000 now. I ordered a set of 850s and got 1000 so I sent them back and called Z1 for 850s and was just told they stopped making them. Sent from my iPhone using Tapatalk

08-13-2015, 06:58 PM	#244 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I'm on a stock block and stock 7AT so I kind of expect to brake one of them but I hope it's not both at the same time! My plan is to get this all done before Oct 3rd so I can take it to Sebring that weekend and see what it can do.

08-13-2015, 09:50 PM	#247 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	Supercharger cog belt being constantly chewed