Stillen Air to Air setup

swiss370Z · 03-19-2016, 01:31 PM

A father like you, I would have also required

The best thing is that you the "Z" have still
and can go from time to time!

Good luck with your A2A- Project, Sir

JWillis72 · 03-21-2016, 03:11 PM

We made progress today but the tuner is at the airport catching a flight home. If all goes well we will try to tune some more power into it tomorrow and get the car back together Wednesday to end this nightmare!

Sent from my iPhone using Tapatalk

RadioFlyer · 03-21-2016, 07:25 PM

Hey, a full pull!! With decent numbers! Nice! It's looking like a light at the end of the tunnel!

JWillis72 · 03-21-2016, 08:02 PM

Quote:

Originally Posted by RadioFlyer

Hey, a full pull!! With decent numbers! Nice! It's looking like a light at the end of the tunnel!

I sure hope so! I hope we have better numbers to show tomorrow but at this point i just want it done! I made a $14,000 payment on the car today, only $3,100 left until it's paid off. I hope when I get it back I fall in love again and wait but I'm going to get my ducks in a row for a new car just in case I still need more power.

Sent from my iPhone using Tapatalk

Elmo370z · 03-21-2016, 08:53 PM

Road racing monster

ANMVQ · 03-22-2016, 08:10 AM

Hey Jay some light man, that's great! it's still rich, but at least it was a full pull

. Hoping this works out man, Props for hanging in there!

JWillis72 · 03-22-2016, 08:20 AM

Quote:

Originally Posted by ANMVQ

Hey Jay some light man, that's great! it's still rich, but at least it was a full pull

. Hoping this works out man, Props for hanging in there!

Thanks man, it's still rich in the mid range but Seb said he thinks it's a tad lean on the high end, hopefully we will get all that worked out today.

ANMVQ · 03-22-2016, 11:24 AM

nice man I must have missed where you said you are having Seb tune it!

JWillis72 · 03-22-2016, 02:29 PM

Quote:

Originally Posted by ANMVQ

nice man I must have missed where you said you are having Seb tune it!

Hes not, I have been sending him logs and want his help but the tuner will not unlock the tune. I ordered a ecutek cable so I may have him retune it at a different shop.

StillenZ84 · 03-22-2016, 02:41 PM

Quote:

Originally Posted by JWillis72

Hes not, I have been sending him logs and want his help but the tuner will not unlock the tune. I ordered a ecutek cable so I may have him retune it at a different shop.

Good deal! Yeah Seb has my 93 tune low 11's at the high end. Yours just seems a tiny bit high. Glad you are seeing light at the end of the tunnel man.

StillenZ84 · 03-22-2016, 03:01 PM

If you need a few of my final logs on 93 to go off of let me know and I can send them to you.

JWillis72 · 03-22-2016, 03:53 PM

Thank but this tuner doesn't listen to crap I say so it's not going to help.

Sent from my iPhone using Tapatalk

Chuck33079 · 03-22-2016, 04:04 PM

Quote:

Originally Posted by JWillis72

Thank but this tuner doesn't listen to crap I say so it's not going to help.

Sent from my iPhone using Tapatalk

Why is that? Is he doing it for free? At what point do you have a come to Jesus with the guy and explain that it's your car, it's your money and he can do it the way you tell him or he can be removed from the project?

JWillis72 · 03-22-2016, 04:50 PM

I agree 100%! He's the shop owners friend and not local so I only hear his **** from the shop. He says the tune will be done today and i will never deal with him again, I can't wait for that! My old tuner knows Seb and has a dyno about 1 1/2 hours away so I can retune it there when I get a cable. At this point it's easier to let him get the tune done than towing the car that far.

Sent from my iPhone using Tapatalk

Chuck33079 · 03-22-2016, 04:53 PM

You need to get a driveable car, and then cut all ties with that shop and tuner. They've turned a moderately difficult project into a major clusterfuck.

03-19-2016, 01:31 PM	#1576 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	A father like you, I would have also required The best thing is that you the "Z" have still and can go from time to time! Good luck with your A2A- Project, Sir __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

03-21-2016, 03:11 PM	#1577 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup We made progress today but the tuner is at the airport catching a flight home. If all goes well we will try to tune some more power into it tomorrow and get the car back together Wednesday to end this nightmare! Sent from my iPhone using Tapatalk BOLIO 671, ANMVQ, swiss370Z and 7 others like this. Last edited by JWillis72; 03-21-2016 at 03:19 PM.

03-22-2016, 08:10 AM	#1581 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Hey Jay some light man, that's great! it's still rich, but at least it was a full pull . Hoping this works out man, Props for hanging in there! JWillis72 likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

03-22-2016, 11:24 AM	#1583 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	nice man I must have missed where you said you are having Seb tune it! __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

03-22-2016, 03:01 PM	#1586 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	If you need a few of my final logs on 93 to go off of let me know and I can send them to you. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

03-21-2016, 07:25 PM	#1578 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 40	Hey, a full pull!! With decent numbers! Nice! It's looking like a light at the end of the tunnel!

03-21-2016, 08:53 PM	#1580 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Road racing monster

03-22-2016, 03:53 PM	#1587 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Thank but this tuner doesn't listen to crap I say so it's not going to help. Sent from my iPhone using Tapatalk

03-22-2016, 04:50 PM	#1589 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I agree 100%! He's the shop owners friend and not local so I only hear his **** from the shop. He says the tune will be done today and i will never deal with him again, I can't wait for that! My old tuner knows Seb and has a dyno about 1 1/2 hours away so I can retune it there when I get a cable. At this point it's easier to let him get the tune done than towing the car that far. Sent from my iPhone using Tapatalk

03-22-2016, 04:53 PM	#1590 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	You need to get a driveable car, and then cut all ties with that shop and tuner. They've turned a moderately difficult project into a major clusterfuck. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 12:03 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 11:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM