People with Modded Vortech V3 stillen kit chime in!!

Boosted Performance · 03-13-2015, 11:37 AM

The V-3 blower is rated to flow 1150cfm. That should be good enough to get you to 600whp, if all other supporting mods are there of course.

mikey1600 · 03-14-2015, 12:24 AM

Quote:

Originally Posted by Boosted Performance

The V-3 blower is rated to flow 1150cfm. That should be good enough to get you to 600whp, if all other supporting mods are there of course.

sweet man, very interested in what you are working on

I've held off upgrading anything else at the moment, was thinking of going E85 and seeing what comes from the kit as is with 9psi but decided to hold off for now.

AntiVenom · 03-14-2015, 06:55 AM

sub'd

the water/air portion of the stillen kit is the primary reason i was hesitant to go stillen. will be nice to see an upgrade path to a "stage 2" version.

airikrankin · 03-14-2015, 08:28 AM

im with you, considered doining a rear mount also, but supercharger is what i would like. i contacted gtm they said there kits are 4-6 weeks from shipping. would do a 500$ deposit then let you know when the kit is together but that would be a risk. said they were making a comback but who knows. i would only do a COD with them and would prefer them to atleast try to make good with the people they ripped off. it sucks cuz im really into thier kit. now if stillen would just sell the blower and mounting brackets i would be into that and do a front mount myself

Chuck33079 · 03-14-2015, 09:09 AM

Quote:

Originally Posted by airikrankin

im with you, considered doining a rear mount also, but supercharger is what i would like. i contacted gtm they said there kits are 4-6 weeks from shipping. would do a 500$ deposit then let you know when the kit is together but that would be a risk. said they were making a comback but who knows. i would only do a COD with them and would prefer them to atleast try to make good with the people they ripped off. it sucks cuz im really into thier kit. now if stillen would just sell the blower and mounting brackets i would be into that and do a front mount myself

Don't believe a word of it. At this point, with all that has happened, going with GTM is just retarded. He will tell you anything to get your money.

Boosted Performance · 03-14-2015, 09:54 AM

I believe that the Stillen kit has higher potential than the other kits due to the head unit. The only issue IMO is the way they have the piping configured.

airikrankin · 03-17-2015, 11:19 AM

what kind of room in under the blower? if keeping stock manifold and running the charge piping to the drivers side is it possible to run the piping under the blower then up to the tb? found a wrecked g37 with this kit on it, before buying was just curious of the room under the blower. it just seems pretty tight to go above or around

EVOHUNTER · 03-17-2015, 01:20 PM

I've been looking into it, Either rotate the blower to 90 degrees and run the pipe down the fan shroud, on the driver side. around the rad and into the intercooler. then up through the passenger side into a Y, then into the TB's. Theres minimal space this way.

Or keep the blower in the same position, run a 12" pipe up to the factory coolant cap, then run it down between the 2 fans, there a lot of space that way. Then back around the passenger or driver side.

There isn't much room the way your thinking.

airikrankin · 03-17-2015, 01:32 PM

any chance u could get a pic?

EVOHUNTER · 03-17-2015, 01:45 PM

we haven't started on it, but my cars in pieces right now.

Do you want a picture of the blower assembly? and the space around it???

the blower is still in the car, but everything else is off.

airikrankin · 03-17-2015, 03:04 PM

ya like to see space around the blower in the car all sides please

EVOHUNTER · 03-17-2015, 03:05 PM

Give me tell tomorrow, ill get you some photos.

airikrankin · 03-17-2015, 03:09 PM

ok thanks, i found a wrecked g37 with the stillen kit on it, front pipe is damaged, but everything else looks ok. wants 5500 for the whole car. i could part it out and scrap it (my dad owns an autowrecking) and get some $$ back and have a spare engine for just incase. but before i get it id like to see how exactly it fits in there. that g37 is in new jersey and im in pa by pittsburgh, so i would have to have it shipped

03-13-2015, 11:37 AM	#16 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	The V-3 blower is rated to flow 1150cfm. That should be good enough to get you to 600whp, if all other supporting mods are there of course. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

03-14-2015, 09:54 AM	#21 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	I believe that the Stillen kit has higher potential than the other kits due to the head unit. The only issue IMO is the way they have the piping configured. AntiVenom likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

03-17-2015, 01:20 PM	#23 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	I've been looking into it, Either rotate the blower to 90 degrees and run the pipe down the fan shroud, on the driver side. around the rad and into the intercooler. then up through the passenger side into a Y, then into the TB's. Theres minimal space this way. Or keep the blower in the same position, run a 12" pipe up to the factory coolant cap, then run it down between the 2 fans, there a lot of space that way. Then back around the passenger or driver side. There isn't much room the way your thinking. swiss370Z likes this. __________________ Last edited by EVOHUNTER; 03-17-2015 at 01:25 PM.

03-17-2015, 01:45 PM	#25 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	we haven't started on it, but my cars in pieces right now. Do you want a picture of the blower assembly? and the space around it??? the blower is still in the car, but everything else is off. Nut_N_Much likes this. __________________

03-17-2015, 03:05 PM	#27 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Give me tell tomorrow, ill get you some photos. __________________

03-14-2015, 06:55 AM	#18 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 11	sub'd the water/air portion of the stillen kit is the primary reason i was hesitant to go stillen. will be nice to see an upgrade path to a "stage 2" version.

03-14-2015, 08:28 AM	#19 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	im with you, considered doining a rear mount also, but supercharger is what i would like. i contacted gtm they said there kits are 4-6 weeks from shipping. would do a 500$ deposit then let you know when the kit is together but that would be a risk. said they were making a comback but who knows. i would only do a COD with them and would prefer them to atleast try to make good with the people they ripped off. it sucks cuz im really into thier kit. now if stillen would just sell the blower and mounting brackets i would be into that and do a front mount myself

03-17-2015, 11:19 AM	#22 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	what kind of room in under the blower? if keeping stock manifold and running the charge piping to the drivers side is it possible to run the piping under the blower then up to the tb? found a wrecked g37 with this kit on it, before buying was just curious of the room under the blower. it just seems pretty tight to go above or around

03-17-2015, 01:32 PM	#24 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	any chance u could get a pic?

03-17-2015, 03:04 PM	#26 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	ya like to see space around the blower in the car all sides please

03-17-2015, 03:09 PM	#28 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	ok thanks, i found a wrecked g37 with the stillen kit on it, front pipe is damaged, but everything else looks ok. wants 5500 for the whole car. i could part it out and scrap it (my dad owns an autowrecking) and get some $$ back and have a spare engine for just incase. but before i get it id like to see how exactly it fits in there. that g37 is in new jersey and im in pa by pittsburgh, so i would have to have it shipped

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motion Lab Tuned Nismo 484whp/400wtq @ 12.5psi w/ Vortech impeller on the Stillen S/C	Motion Lab	Tuning	39	09-02-2016 11:45 AM
Motion Lab Tuned 2012 Nismo 446WHP/378WTQ Built motor w/ Vortech upgraded Stillen kit	Motion Lab	Tuning	12	03-05-2014 10:54 AM
Stillen CBE Owners Chime In	40 to 332	Intake/Exhaust	4	05-06-2013 08:32 PM
Stillen vortech charger kit	EVOHUNTER	Forced Induction	40	07-12-2011 04:49 PM
Stillen G3's those who own with real results please Chime in	BOLIO 671	Intake/Exhaust	54	09-27-2010 02:39 PM