oil-less turbo for rear mount?

Boosted Performance · 02-03-2015, 03:04 PM

Quote:

Originally Posted by COSMO

Oh and regarding the gtr board, I think do to the fact of not everybody can afford a 100k car, the forum is entirely professional without trolling and politics..

Quote:

Originally Posted by COSMO

Hey pal if you don't go with a bp turbo kit, sasha's disciples will most certainly crucify you here on the forum..

I am not sure why you have an issues with my customers posting their honest experience with the kit. You posted your experience with GTM...maybe you regret taking that road, and don't like see others having successful builds with other kits?

I as vendor think that these open forums are great for all of you (customers) to come in and do your research. It provides the new potential customers with important information on the products on the market, how they perform, how the customers service is, and an overall experience.

COSMO · 02-03-2015, 03:17 PM

And the Messiah has again spoken. Your disciples keep you very informed..

TopgunZ · 02-03-2015, 03:39 PM

Why cant you just learn when to shut the F**k up? Your input adds ZERO education to those looking for future kits.

Mods... Do we want this on the forum? Look how far he has derailed this thread..AGAIN.

How many times has he been warned to keep things on track and relevant to the posting title?

People come here to learn how to spend the thousands of hard earned dollars and pour their heart into it and they are getting false impressions from this guy. Without his ignorant posts, they would be way better off.

COSMO · 02-03-2015, 05:06 PM

Dude your the only one here having a fit and you should try taking some of your own advise.. Cleanup on isle 3..

jwick · 02-03-2015, 05:20 PM

Quote:

Originally Posted by COSMO

Hey pal if you don't go with a bp turbo kit, sasha's disciples will most certainly crucify you here on the forum..

Quote:

Originally Posted by COSMO

Ok lets go over our words here.. (wouldn't) short for (would not).. The bp kit would not be a bad choice.. Tomorrow we will cover another word... lol

Quote:

Originally Posted by COSMO

And like I mentioned, here are his disciples now... lol

Quote:

Originally Posted by COSMO

I wonder if Fast Intentions has a super club people can join like the bp club? As far as the bp kit goes it is very good but to say incredible is far fetched.. Look what some of these custom builds progressing for a moment. It's forced induction people, more air , more fuel and less timing...

Quote:

Originally Posted by COSMO

wow man really get out and get a life... lol

Quote:

Originally Posted by COSMO

Because your not running crap for boost because you lack a built motor..
Not mad at all, actually having lunch laughing you guys trying not to choke... lol

And as if seems your the only one trying to stir things up here...

Quote:

Originally Posted by COSMO

dumbing down, nice terminology there ace..

Nice flag to btw, I had a feeling you went both ways..

Quote:

Originally Posted by COSMO

You know exactly what I mean... Flying your multicolored flag, I hear ya brotha just let it out. People come out of the closet in all kinds of ways and its ok..

Quote:

Originally Posted by COSMO

And the Messiah has again spoken. Your disciples keep you very informed..

Quote:

Originally Posted by COSMO

Dude your the only one here having a fit and you should try taking some of your own advise.. Cleanup on isle 3..

Yup...every one of these above the belt and on topic

VSS370z · 02-03-2015, 05:28 PM

Was looking into doing some reading on this thread but guess i'll get

COSMO · 02-03-2015, 05:37 PM

Yeah the BP Club of America has taken over this thread and every other FI thread on the forum.. Drop it guys and troll-on somewhere else..

Quote:

Originally Posted by VSS370z

Was looking into doing some reading on this thread but guess i'll get

airikrankin · 02-03-2015, 05:44 PM

ya was excited to see 3 pages of replies to only be let down, ha oh well i did consider the bp kit but i also do not want to buy a fi exhaust to mate up with it. i suppose if i were considering to diy turbo, a diy exhaust wouldnt be that hard to fap up. with the tt kits out now i cant swallow spending the 10k on a kit i will never push to its potential. i was considering selling the car in anticipation of the new z coming out but now its almost paid off and wouldn't mind boosting it and not having a car payment for awhile. for the price of the stillen kit for the hp gain, the bp kit is far more of a better choice. but with these oil-less turbos plumbing one up for a rear mount just seems like a cost effective approach for a diy turbo kit to make roughly 400hp. i live near a "tuner shop", so a dyno would be handy along with any issues that may arise, iv dont a custom turbo build before and also have done a custom supercharger build before. so i understand what is involved. iv read a few post of owners of the sts kit say there is no lag, wich im quite sure that there is but are claiming to hit full boost by 3500rpms with videos on youtube to prove it. i have only skimmed the 350z forums for issues with the sts kit and it seems like the only issues are with sts themselves not the turbo placement. there are i think 3k replies to the official sts turbo thread wich is mostly people complaining about sts. i need to get my car up in the air perhaps there is a closer place for it, has anyone been under thier z lately to think of a "cavity" it could be placed or is it fairly tight?

jaytirbhaw · 02-22-2015, 10:54 AM

Chuck33079 · 02-22-2015, 11:17 AM

Quote:

Originally Posted by airikrankin

ya was excited to see 3 pages of replies to only be let down, ha oh well i did consider the bp kit but i also do not want to buy a fi exhaust to mate up with it. i suppose if i were considering to diy turbo, a diy exhaust wouldnt be that hard to fap up. with the tt kits out now i cant swallow spending the 10k on a kit i will never push to its potential. i was considering selling the car in anticipation of the new z coming out but now its almost paid off and wouldn't mind boosting it and not having a car payment for awhile. for the price of the stillen kit for the hp gain, the bp kit is far more of a better choice. but with these oil-less turbos plumbing one up for a rear mount just seems like a cost effective approach for a diy turbo kit to make roughly 400hp. i live near a "tuner shop", so a dyno would be handy along with any issues that may arise, iv dont a custom turbo build before and also have done a custom supercharger build before. so i understand what is involved. iv read a few post of owners of the sts kit say there is no lag, wich im quite sure that there is but are claiming to hit full boost by 3500rpms with videos on youtube to prove it. i have only skimmed the 350z forums for issues with the sts kit and it seems like the only issues are with sts themselves not the turbo placement. there are i think 3k replies to the official sts turbo thread wich is mostly people complaining about sts. i need to get my car up in the air perhaps there is a closer place for it, has anyone been under thier z lately to think of a "cavity" it could be placed or is it fairly tight?

It's not the "full boost by 3500 rpm" lag that's the problem. It's going to be the on/off throttle parts. You've got a lot of pipe to pressurize every time you roll on the gas, even when you're above 3500 rpm. Mounting a turbo out back is a seriously compromised location.

airikrankin · 02-22-2015, 11:54 AM

would a smaller diameter pipe from the turbo to intercooler be to much of a restriction? say 2" or 2 1/4"? assuming the turbo would have a 2" outlet.

Kris9884 · 08-08-2016, 06:22 PM

BUMP... This was less than helpful and even included some misinformation. Lets not argue about which setup is better or worse. Lets just all agree it may not be as efficient as a front kit but, it is far cheaper than a standard engine bay install and you could get similar results. Besides, for a platform that charges $400 for intakes and MAYBE 15 hp, what's so wrong with $2-3k for 150+hp?? Anyone have any real world experience and have some tips/advice for those of us considering this avenue? Plus, the original question was about oil less turbo, besides not having to mount an oil pump, lines etc, is it worth using one?

02-03-2015, 03:39 PM	#33 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Why cant you just learn when to shut the Fk up? Your input adds ZERO education to those looking for future kits. Mods... Do we want this on the forum? Look how far he has derailed this thread..AGAIN. How many times has he been warned to keep things on track and relevant to the posting title? People come here to learn how to spend the thousands of hard earned dollars and pour their heart into it and they are getting false impressions from this guy. Without his ignorant posts, they would be way better off. JARblue, megalapagas and wsarver like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM** Last edited by TopgunZ; 02-03-2015 at 03:54 PM.

02-03-2015, 05:28 PM	#36 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 13	Was looking into doing some reading on this thread but guess i'll get megalapagas likes this.

02-03-2015, 05:44 PM	#38 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	ya was excited to see 3 pages of replies to only be let down, ha oh well i did consider the bp kit but i also do not want to buy a fi exhaust to mate up with it. i suppose if i were considering to diy turbo, a diy exhaust wouldnt be that hard to fap up. with the tt kits out now i cant swallow spending the 10k on a kit i will never push to its potential. i was considering selling the car in anticipation of the new z coming out but now its almost paid off and wouldn't mind boosting it and not having a car payment for awhile. for the price of the stillen kit for the hp gain, the bp kit is far more of a better choice. but with these oil-less turbos plumbing one up for a rear mount just seems like a cost effective approach for a diy turbo kit to make roughly 400hp. i live near a "tuner shop", so a dyno would be handy along with any issues that may arise, iv dont a custom turbo build before and also have done a custom supercharger build before. so i understand what is involved. iv read a few post of owners of the sts kit say there is no lag, wich im quite sure that there is but are claiming to hit full boost by 3500rpms with videos on youtube to prove it. i have only skimmed the 350z forums for issues with the sts kit and it seems like the only issues are with sts themselves not the turbo placement. there are i think 3k replies to the official sts turbo thread wich is mostly people complaining about sts. i need to get my car up in the air perhaps there is a closer place for it, has anyone been under thier z lately to think of a "cavity" it could be placed or is it fairly tight? jaytirbhaw likes this.

08-08-2016, 06:22 PM	#42 (permalink)
Kris9884 Base Member Join Date: Mar 2016 Location: MO Posts: 72 Drives: 2008 G37s Rep Power: 9	BUMP... This was less than helpful and even included some misinformation. Lets not argue about which setup is better or worse. Lets just all agree it may not be as efficient as a front kit but, it is far cheaper than a standard engine bay install and you could get similar results. Besides, for a platform that charges $400 for intakes and MAYBE 15 hp, what's so wrong with $2-3k for 150+hp?? Anyone have any real world experience and have some tips/advice for those of us considering this avenue? Plus, the original question was about oil less turbo, besides not having to mount an oil pump, lines etc, is it worth using one? __________________ My slow build thread on MyG37 - http://www.myg37.com/forums/build-th...upe-build.html Last edited by Kris9884; 08-08-2016 at 06:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dan's VSR top-mount turbo 370 v3.0	FireDan50	Member's 370Z Gallery	163	05-19-2020 03:49 PM
My 5k budget mid mount turbo build	BBRSpeedWorks	Forced Induction	319	02-11-2018 12:19 AM
1ST 7AT TOP MOUNT TURBO BUILD.. By S&R Performance	valpozguy	Forced Induction	83	04-27-2014 11:02 PM
Sts rear mount turbo	Ni55anPat	Wanted	3	12-22-2012 07:15 PM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 03:53 PM

02-03-2015, 03:17 PM	#32 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	And the Messiah has again spoken. Your disciples keep you very informed..

02-03-2015, 05:06 PM	#34 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Dude your the only one here having a fit and you should try taking some of your own advise.. Cleanup on isle 3..

02-22-2015, 10:54 AM	#39 (permalink)
jaytirbhaw Track Member Join Date: Dec 2009 Location: NYC Posts: 814 Drives: 350z HR , Nismo 370z Rep Power: 17

02-22-2015, 11:54 AM	#41 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	would a smaller diameter pipe from the turbo to intercooler be to much of a restriction? say 2" or 2 1/4"? assuming the turbo would have a 2" outlet.