Gauge Cluster Swap

Spartan 1771 · 10-18-2018, 07:21 PM

I'm going to try and ressurect this thread.

My Z is an 09 Touring. It does not have the sports package and it's a manual transmission. Does anyone have any idea if I can swap the gauge cluster for a 2015 Nismo cluster? I know the mileage will need to be reprogrammed, but that's not an issue. I just need to know if it will physically work.

Anyone have any idea on this or theories?

As always, any and all help will be most appreciated.

Stormtroopr · 11-30-2018, 02:44 AM

Do you know if we can remove the gauge cluster and start the car and drive it ?
I would like to remove it to add an AIM dash logger but I know on some cars you have to keep the gauge cluster.

Spartan 1771 · 11-30-2018, 08:49 AM

Quote:

Originally Posted by Stormtroopr

Do you know if we can remove the gauge cluster and start the car and drive it ?
I would like to remove it to add an AIM dash logger but I know on some cars you have to keep the gauge cluster.

Unfortunately I can't answer that, but I'm curious to know as well.

dts3 · 11-30-2018, 09:39 AM

Quote:

Originally Posted by Nut_N_Much

I got to put the car threw the paces today.
1. Gauges all work with MYT Gauge cluster
2. Drive, Park, Neutral, Revers all shows on my 7AT
3. I went from 70,000 miles to 39,000 miles
4. The paddle shift does NOT WORK!!!!

So don't do the swap out if you use your paddle shifter.
Thats what i get for asking my wife if it worked when she drove to work. Sorry guys..

I'll pull the cluster apart and install the face into mine.

So then the cluster is responsible for passing on the signals for the paddle shifters to the transmission control. I doubt this is on CAN, so check the wiring harnesses going into and out of the cluster, and look for any missing wires on the 6MT cluster's harness that are present on a 7AT. I forget which chapter/pdf file of the FSM includes all of the connector pinouts, but It's in there. Check LAN and MWI first.

jproano24 · 11-11-2019, 10:13 PM

When you said "I pulled the cluster apart and installed the face into mine" Do you mean you swapped the gauge face only and installed it on your original touring cluster? I want to change the gauge face as well but not sure if can be done.

Spartan 1771 · 11-11-2019, 10:57 PM

Quote:

Originally Posted by jproano24

When you said "I pulled the cluster apart and installed the face into mine" Do you mean you swapped the gauge face only and installed it on your original touring cluster? I want to change the gauge face as well but not sure if can be done.

I did exactly that a few months ago. I swapped the tachometer face, the info screen on the left side and the trim bezel. My 2009 touring gauge pod now resembles a 2015+ NISMO pod. The only difference is that the small gear indicator screen, located below the tachometer on mine doesn't work. It was pretty easy to do. You just have to be careful with disconnecting everything. You don't want to break any of the connectors.

The photo is of the finished product.

10-18-2018, 07:21 PM	#16 (permalink)
Spartan 1771 A True Z Fanatic Join Date: Nov 2009 Location: Western Maryland Posts: 1,280 Drives: Wife crazy & 09 370Z Rep Power: 105454	I'm going to try and ressurect this thread. My Z is an 09 Touring. It does not have the sports package and it's a manual transmission. Does anyone have any idea if I can swap the gauge cluster for a 2015 Nismo cluster? I know the mileage will need to be reprogrammed, but that's not an issue. I just need to know if it will physically work. Anyone have any idea on this or theories? As always, any and all help will be most appreciated. __________________ ~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

11-11-2019, 10:13 PM	#20 (permalink)
jproano24 Base Member Join Date: Nov 2014 Location: San Gabriel Valley Posts: 10 Drives: Nissan 370z Rep Power: 11	When you said "I pulled the cluster apart and installed the face into mine" Do you mean you swapped the gauge face only and installed it on your original touring cluster? I want to change the gauge face as well but not sure if can be done. Spartan 1771 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Triple Gauge Cluster	ryan0	DIY Section (Do-It-Yourself)	94	11-29-2021 10:47 AM
Add Touring gauge cluster?	osbornsm	Exterior & Interior	4	06-28-2011 05:41 PM
WTB: Gauge Cluster	Push370zzz	Parts for sale (Private Classifieds)	4	10-14-2010 05:44 PM
WTB: Gauge Cluster	Push370zzz	Wanted	0	10-14-2010 04:28 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM

11-30-2018, 02:44 AM	#17 (permalink)
Stormtroopr Base Member Join Date: Apr 2016 Location: Paris, FRANCE Posts: 30 Drives: 16 nismo 370Z Wh M6 Rep Power: 9	Do you know if we can remove the gauge cluster and start the car and drive it ? I would like to remove it to add an AIM dash logger but I know on some cars you have to keep the gauge cluster.