diffuser!

flexican77 · 01-16-2015, 03:09 PM

I know I'm not on much, but I figured I'd share my Z a bit... I've installed motordyne's exhaust, art pipes, and intake manifold, stillen twintakes lol, 6piston front bbk by wilwood,quaife 1.5 lsd, z1 25 row oil cooler, eibach sways, Godspeed mono max 41 way coilovers, and CRZY Engineering's rear diffuser... I need a front lip to do a splitter, but when I have more money, more will happen... In for an osiris uprev dyno tune today. And had all my installations done at CRZY Engineering as well... CRZY is in El Monte, CA and I'm going to Church's for the tune... Enjoy!

1st · 01-16-2015, 05:10 PM

That diffuser..is pretty crazy lookin.

kenchan · 01-16-2015, 05:11 PM

all i saw were stock wheels.

cooltoy · 01-16-2015, 05:45 PM

You are like my inner voice.

kenchan · 01-16-2015, 05:47 PM

Quote:

Originally Posted by cooltoy

You are like my inner voice.

oh i actually posted that..!

cooltoy · 01-16-2015, 05:48 PM

DOOMMONKEY777 · 01-16-2015, 09:51 PM

Am not impressed, should not cost more than $200 for that sheet meal and bolts n stuff. Is it me or that 1 and only wing on that sheet metal isn't centered? Looks good on a boat. Srry am an a$$ cuz it looks bad.

ZRAYGO · 01-16-2015, 10:28 PM

I think its pretty bad ***. But when I go to the website I don't see one for the Z. Did you retrofit?

mikey1600 · 01-17-2015, 01:00 PM

I actually like it, although rocking something wild on the kit really requires some nice aftermarket and aggresive offset wheels to make it not look ricey.

flexican77 · 01-17-2015, 04:24 PM

Wheels are next.. it's gonna be a track car. I n ed suspension end links so I can corner balance it. The diffuser will be on their site, mine was the first model they used, and they used allumlite or something. Everyone after them started using it to sell, but it's been thinner material. They have a patent pending breakaway splitter or diffuser and a patent pending for the way they can switch out fin sizes as well , from aggressive applications to more moderate if it's street vs track.

flexican77 · 01-17-2015, 04:25 PM

It's also bolted to the chassis, not to any bumpers

flexican77 · 01-17-2015, 04:29 PM

There is the alignment at whoever Said it was off.. that was my bad at pic angle

tommyguns · 01-17-2015, 07:34 PM

Liking it, but it's definitely off. It's off center by about 1/4" to the right and the strut supports are not evenly spaced. But you need to be real anal to notice it. Nothing to worry about, GOOD JOB!

Japanjay · 01-17-2015, 07:56 PM

That thing is going to get jacked up coming out of the first decently angled exit. Not bad though.

nomodsjk · 01-17-2015, 08:04 PM

Looking good bro!

01-16-2015, 05:11 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	all i saw were stock wheels. cooltoy likes this.

01-16-2015, 05:45 PM	#4 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	You are like my inner voice. kenchan likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-16-2015, 05:48 PM	#6 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	kenchan likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-16-2015, 09:51 PM	#7 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Oct 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 21	Am not impressed, should not cost more than $200 for that sheet meal and bolts n stuff. Is it me or that 1 and only wing on that sheet metal isn't centered? Looks good on a boat. Srry am an a$$ cuz it looks bad. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

01-17-2015, 01:00 PM	#9 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	I actually like it, although rocking something wild on the kit really requires some nice aftermarket and aggresive offset wheels to make it not look ricey. flexican77 likes this.

01-16-2015, 05:10 PM	#2 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,709 Drives: Platinum Z Rep Power: 1616	That diffuser..is pretty crazy lookin.

01-16-2015, 10:28 PM	#8 (permalink)
ZRAYGO Base Member Join Date: Jun 2011 Location: Atlanta, Georgia Posts: 69 Drives: '12 370z, '06 CLK350 Rep Power: 14	I think its pretty bad ***. But when I go to the website I don't see one for the Z. Did you retrofit?

01-17-2015, 04:24 PM	#10 (permalink)
flexican77 Base Member Join Date: Aug 2014 Location: California Posts: 12 Drives: 2014 370z Rep Power: 11	Wheels are next.. it's gonna be a track car. I n ed suspension end links so I can corner balance it. The diffuser will be on their site, mine was the first model they used, and they used allumlite or something. Everyone after them started using it to sell, but it's been thinner material. They have a patent pending breakaway splitter or diffuser and a patent pending for the way they can switch out fin sizes as well , from aggressive applications to more moderate if it's street vs track.

01-17-2015, 04:25 PM	#11 (permalink)
flexican77 Base Member Join Date: Aug 2014 Location: California Posts: 12 Drives: 2014 370z Rep Power: 11	It's also bolted to the chassis, not to any bumpers

01-17-2015, 07:34 PM	#13 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Liking it, but it's definitely off. It's off center by about 1/4" to the right and the strut supports are not evenly spaced. But you need to be real anal to notice it. Nothing to worry about, GOOD JOB! flexican77 likes this. __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

01-17-2015, 07:56 PM	#14 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	That thing is going to get jacked up coming out of the first decently angled exit. Not bad though.

01-17-2015, 08:04 PM	#15 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	Looking good bro!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] CF Diffuser	Got_Z	Parts for sale (Private Classifieds)	10	11-19-2014 12:42 AM
Fujimara Rear Diffuser VS. EVO-R NEW Diffuser	KB2	Exterior & Interior	12	02-11-2014 09:03 PM
[FOR SALE] Evo-R diffuser, FRP	scionide	Parts for sale (Private Classifieds)	19	12-30-2013 10:46 AM
Want this diffuser so bad!	Arrvaxx	Exterior & Interior	20	08-27-2013 12:06 PM
Diffuser !!!!!	theboydiddy	Nissan 370Z General Discussions	2	03-03-2013 10:58 AM