Aerojacket V1 Fenders Question

Luciano13 · 01-05-2015, 02:04 PM

R u sure u have it under the light bracket? I have CS fender and i thought the same thing a first. It was like an inch off.... Then the fender slipped, and realized it went under the bracket...perfect fit after that! I was about to break them in half too

mag_black · 01-06-2015, 07:49 PM

^^ the title is a bit misleading; I believe he's talking about AJ fenders and not CS.

Donald@Carbonsignal · 01-06-2015, 09:49 PM

Yes please fix the title OP thank you......Again OP is talking about AJ fenders not CS.

Sent from my iPhone using Tapatalk

Trips · 01-06-2015, 09:56 PM

Title has been edited

ZLady · 01-07-2015, 08:52 AM

Quote:

Originally Posted by Donald@Carbonsignal

Yes please fix the title OP thank you......Again OP is talking about AJ fenders not CS.

Sent from my iPhone using Tapatalk

If you read the part where it was corrected you would see i clarified for readers. You cant edit main title once you post, but i corrected it in beginning.

Riptide67 · 01-07-2015, 05:32 PM

The AJ guys have been great to me as far as customer service goes and their products. Please be sure the fender tab goes under the light bracket. I ahd this issue with my seibon fenders and was like WTF. It was an error on our part during installation.

A friend of mine has the AJ fenders on his nismo with no issues and I would give the overall fitment a 9.5/10.

CarbonSignal · 01-07-2015, 09:47 PM

Quote:

Originally Posted by GaleForce

Have you contacted Carbon Signal to see if they have any suggestions?

We have fitted on both Nismo and normal including newer one all are same fenders.

Quote:

Originally Posted by TerribleONE

They couldn't even send me an interior kit that fit, so no surprise here. Hope you get your money back or a new set of fenders, I never did.

Again

no comments

Quote:

Originally Posted by ZLady

Yup.. I messaged them on here and they were like they should fit no problem because OEM...

ok... well I messaged you saying they DO NOT fit to OEM and told them exactly where the problems where... what do you expect. NO RESPONSE. I will no be recommending them at all... Such a shame.

Luckily my IT guy knows how to do fabrication work and can help me.

Yes the reason we said OEM because we make vents in OEM fenders without touching any mounting point up or low, not sure where was the confusion, Stock metal fenders will fit the car as its made for them without a mm gap as with any OEM part.

Coming to our V2 fenders those are in FRP and fits clean without any issue again on nismo and normal some pics for reference there was NO BODYWORK needed to make these fit like this.

Sometime the white bracket under headlights can get stuck but little maneuvering can solve this issue

ZLady · 01-08-2015, 09:48 AM

Quote:

Originally Posted by CarbonSignal

We have fitted on both Nismo and normal including newer one all are same fenders.

Again

no comments

Yes the reason we said OEM because we make vents in OEM fenders without touching any mounting point up or low, not sure where was the confusion, Stock metal fenders will fit the car as its made for them without a mm gap as with any OEM part.

Coming to our V2 fenders those are in FRP and fits clean without any issue again on nismo and normal some pics for reference there was NO BODYWORK needed to make these fit like this.

Sometime the white bracket under headlights can get stuck but little maneuvering can solve this issue

Can you go ahead and PM me a estimate on these please. I'm in Florida 33432. I would greatly appreciate it. Thanks

ZLady · 01-08-2015, 09:50 AM

And i know that they aren't going to line up like regular stock fenders... I just don't want to force bolts into place. CS there are a few parts I am looking at from y'all so Ill wait to get your pm. THANKS!

Luciano13 · 01-08-2015, 10:39 AM

Quote:

Originally Posted by ZLady

And i know that they aren't going to line up like regular stock fenders... I just don't want to force bolts into place. CS there are a few parts I am looking at from y'all so Ill wait to get your pm. THANKS!

I have CS V2 fenders... They actually line up pretty darn close to stock. But u need to do some extra bolts in non stock holes

Adalvar · 01-08-2015, 11:10 PM

I'm thinking of doing this mod to my 13' nismo. Any pictures of the fitment ZLady?

-Adalvar

Stssjester · 01-10-2015, 06:13 PM

They fit on my 2013 Nismo just fine!

Stssjester · 01-10-2015, 06:23 PM

[IMG][/IMG]

Here is another picture. I am at work right now or I would send you a better one.

CarbonSignal · 01-10-2015, 09:31 PM

Quote:

Originally Posted by ZLady

And i know that they aren't going to line up like regular stock fenders... I just don't want to force bolts into place. CS there are a few parts I am looking at from y'all so Ill wait to get your pm. THANKS!

pm sent they do bolt up straight just like V1 or OEM fenders

01-05-2015, 02:04 PM	#31 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 245	R u sure u have it under the light bracket? I have CS fender and i thought the same thing a first. It was like an inch off.... Then the fender slipped, and realized it went under the bracket...perfect fit after that! I was about to break them in half too axmea? likes this. __________________ http://www.the370z.com/members-370z-...lid-red-z.html

01-06-2015, 07:49 PM	#32 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	^^ the title is a bit misleading; I believe he's talking about AJ fenders and not CS. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

01-06-2015, 09:49 PM	#33 (permalink)
Donald@Carbonsignal Base Member Join Date: Mar 2013 Location: USA Posts: 234 Drives: xyZ cars Rep Power: 13	Yes please fix the title OP thank you......Again OP is talking about AJ fenders not CS. Sent from my iPhone using Tapatalk mag_black likes this.

01-06-2015, 09:56 PM	#34 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Title has been edited mag_black likes this. __________________

01-07-2015, 05:32 PM	#36 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	The AJ guys have been great to me as far as customer service goes and their products. Please be sure the fender tab goes under the light bracket. I ahd this issue with my seibon fenders and was like WTF. It was an error on our part during installation. A friend of mine has the AJ fenders on his nismo with no issues and I would give the overall fitment a 9.5/10. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

01-08-2015, 09:50 AM	#39 (permalink)
ZLady Base Member Join Date: Oct 2013 Location: Fort Lauderdale, FL Posts: 152 Drives: 2013 Nismo 370Z Rep Power: 12	And i know that they aren't going to line up like regular stock fenders... I just don't want to force bolts into place. CS there are a few parts I am looking at from y'all so Ill wait to get your pm. THANKS! __________________ Zqueen Proud driver of a 2013 Nismo 370Z Built not Bought ♡ Female Driven

01-08-2015, 11:10 PM	#41 (permalink)
Adalvar Base Member Join Date: Jul 2013 Location: Phoenix, AZ Posts: 179 Drives: 13 Nissan 370z Nismo Rep Power: 12	I'm thinking of doing this mod to my 13' nismo. Any pictures of the fitment ZLady? -Adalvar

01-10-2015, 06:13 PM	#42 (permalink)
Stssjester Base Member Join Date: May 2014 Location: San Diego Posts: 47 Drives: 2013 Nismo Rep Power: 11	They fit on my 2013 Nismo just fine! 6MT-Z34 and Adalvar like this. __________________ Stillen Gen 3, LED conversion for all lights, FI CF CBE w/HFC's, Aerojacket Fenders, and Plastidipped Everything!

01-10-2015, 06:23 PM	#43 (permalink)
Stssjester Base Member Join Date: May 2014 Location: San Diego Posts: 47 Drives: 2013 Nismo Rep Power: 11	[IMG][/IMG] Here is another picture. I am at work right now or I would send you a better one. __________________ Stillen Gen 3, LED conversion for all lights, FI CF CBE w/HFC's, Aerojacket Fenders, and Plastidipped Everything!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] AeroJacket VF Fenders	UnReal	Parts for sale (Private Classifieds)	12	10-08-2014 12:14 PM
[FOR SALE] AeroJacket fenders	MX52Z	Parts for sale (Private Classifieds)	17	06-10-2014 12:49 PM
AeroJacket Fenders on a ZR	ParkStr8	Nissan 370Z Roadster (Convertible)	7	04-03-2014 09:04 AM
[FOR SALE] Aerojacket vented fenders non Cf	TripleBlkZ	Parts for sale (Private Classifieds)	9	04-24-2013 10:17 PM