interior modifications questions.

kenchan · 11-12-2014, 01:47 PM

honestly i would just wait until the 2015 parts at available and get the actual nissan parts to replace the bits you want to replace...unless you want a specific color or something to match something in the interior.

kenchan · 11-12-2014, 01:48 PM

Quote:

Originally Posted by Read T

Hydro Dipping is the way to go.
Brother's car

looks good, but should really clean the console trim edges to make things really pop.
and rid them coins.. use a transponder.

Read T · 11-12-2014, 06:13 PM

Quote:

Originally Posted by kenchan

looks good, but should really clean the console trim edges to make things really pop.
and rid them coins.. use a transponder.

Transponder? we don't have these things you talk of in North Carolina. (actually now we do, just not near CLT). Not sure why he keeps coins in his car actually.

Tadpole · 11-12-2014, 07:48 PM

Quote:

Originally Posted by cooltoy

Hory shet!! Iggy rister.

Genius!

edliaszenik · 11-13-2014, 12:01 AM

Didn't think about hydro dipping. Would the light from some of the switches (s-mode and hazards) still be visable through the thin film? Also what is the going rate for hydro dipped pieces now a days? Last I've heard it wasn't exactly cheap.

90 ST · 11-13-2014, 12:10 AM

Its reasonable, price will vary depending on who does it in your area. As for the switches, you would have to take all of them out.

Read T · 11-13-2014, 12:13 AM

pricewise it's come down a decent amount. The water transfer I posted above was a practice/freebee since my brother was setting up his shop.

edliaszenik · 11-13-2014, 12:14 AM

So I found a Vin from a '15 so I've been playing around on the Nissan parts site. As of now it doesn't seem like the parts I want are available but on the bright side I'll be deploying soonish and hopefully when I get back these parts should be available from Nissan directly. And as they are just aesthetic changes they should be direct drop ins from my stock ones. I'd much rather go OEM for everything anyways.

edliaszenik · 11-13-2014, 12:16 AM

Cool if its affordable I might do that in the mean time just for ***** and giggles. But then again I could use money on making my car appear to be a way louder base model. Afterall that is what's important right?

edliaszenik · 11-18-2014, 11:56 PM

Anyone know if hydrodipping any of the switches would allow visable light to pass through? Id ile to have those switches black but still have the light function.

11-12-2014, 01:47 PM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	honestly i would just wait until the 2015 parts at available and get the actual nissan parts to replace the bits you want to replace...unless you want a specific color or something to match something in the interior. Smashley likes this.

11-13-2014, 12:13 AM	#22 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 18	pricewise it's come down a decent amount. The water transfer I posted above was a practice/freebee since my brother was setting up his shop. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sti to nismo? Also questions about interior.	Sinsubie07	Nismo 370Z	13	03-12-2013 03:53 PM
Silver interior trim modifications	dP3NGU1N	Exterior & Interior	10	01-31-2013 05:50 PM
Modifications and warranty	SlowNCurious	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	11-27-2010 07:23 PM
Questions, questions and more questions for a potential 370z buyer!	tag824	Nissan 370Z General Discussions	67	09-18-2010 01:07 AM
Order of modifications	hfrog355	Nissan 370Z General Discussions	10	05-26-2010 12:56 AM

11-13-2014, 12:01 AM	#20 (permalink)
edliaszenik Base Member Join Date: Sep 2014 Location: Honolulu, HI Posts: 184 Drives: 2012 NISMO 370Z Rep Power: 11	Didn't think about hydro dipping. Would the light from some of the switches (s-mode and hazards) still be visable through the thin film? Also what is the going rate for hydro dipped pieces now a days? Last I've heard it wasn't exactly cheap.

11-13-2014, 12:10 AM	#21 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	Its reasonable, price will vary depending on who does it in your area. As for the switches, you would have to take all of them out.

11-13-2014, 12:14 AM	#23 (permalink)
edliaszenik Base Member Join Date: Sep 2014 Location: Honolulu, HI Posts: 184 Drives: 2012 NISMO 370Z Rep Power: 11	So I found a Vin from a '15 so I've been playing around on the Nissan parts site. As of now it doesn't seem like the parts I want are available but on the bright side I'll be deploying soonish and hopefully when I get back these parts should be available from Nissan directly. And as they are just aesthetic changes they should be direct drop ins from my stock ones. I'd much rather go OEM for everything anyways.

11-13-2014, 12:16 AM	#24 (permalink)
edliaszenik Base Member Join Date: Sep 2014 Location: Honolulu, HI Posts: 184 Drives: 2012 NISMO 370Z Rep Power: 11	Cool if its affordable I might do that in the mean time just for ***** and giggles. But then again I could use money on making my car appear to be a way louder base model. Afterall that is what's important right?

11-18-2014, 11:56 PM	#25 (permalink)
edliaszenik Base Member Join Date: Sep 2014 Location: Honolulu, HI Posts: 184 Drives: 2012 NISMO 370Z Rep Power: 11	Anyone know if hydrodipping any of the switches would allow visable light to pass through? Id ile to have those switches black but still have the light function.